Treasure Garden BASE-13R Installation instructions

BASE-13R
Up to 400 lbs.
Cantilever Rolling Base
Assembly and Operation Guide
www.treasuregarden.com
©2018 Treasure Garden, Inc. - All ights eserved. 12/18

Thank you for purchasing Treasure Garden’s Cantilever olling Base.
Please remove all contents from the package, inspect and review parts list.
CAUTION: To reduce personal injury and damage to your base or umbrella, read and
follow this instruction manual. We recommend a two-person team for assembly and
disassembly. Save information for future reference.
61
1 BaseCover 1
2 Steel Base Frame with wheels 1
3 Add-On Weight Containers 4
4 Pedal 1
5 Playground Sand (not included) 230 lbs.
BASE-13R PART LIST
Part Description Qty.
CAUTION: Make sure fingers, toes and any other parts of the body are clear from
under the base when operating base foot pedal. Failing to do so may result in
serious injury.
REQUIRED FOR ASSEMBLY:
• 230 lbs. playground sand or all-purpose sand (not included).
IMPORTANT:
• Allow ample height to avoid damage to your umbrella during assembly and usage.
• Choose a location that is level and sturdy.
• Avoid any sloping or soft ground.
NOTE: Some parts may be included in the styrofoam packaging. DO NOT discard any
packaging or box until assembly is complete.
WARRANTY:
Treasure Garden warrants this product
(in residential use) to be free from
defects in original materials and
workmanship for a period of 2 year from
the date of purchase. If a defect in the
original material or workmanship
appears during the warranty period;
Treasure Garden will (at its option) repair
or replace the product without charge.
Simply contact your original authorized
Treasure Garden dealer with a
description of the defect. The dealer will
verify the defect and work closely with
Treasure Garden to obtain the necessary
service. In many cases, simple problems
can be solved with a replacement part
that can be shipped directly to the dealer
for professional installation / repair.
In the event that warranted factory
service is required, Treasure Garden will
assume the responsibility of the return
freight charges on warranted product for
the first year only.
eturned product that (upon receipt and
inspection) is deemed to be “not
covered” under our warranty, will be
shipped / billed at your expense.
This warranty gives you specific legal
rights, and you may have other rights
which vary from state to state.
RUST: ust is a natural part of the
aging process of steel or iron based
materials, and is therefore NOT
considered a defect.
NOTE: Failure caused by unreasonable
or abusive use, or failure caused by
neglect of reasonable and necessary
care are not covered by this warranty.
Additionally, acts of nature (including but
not limited to wind, hurricanes,
tornadoes, and storms) are not covered
by this warranty.

25
(Fig. 1)
(Fig. 3)
(Fig. 4)
S T E P 1 Base Assembl
Select area to assemble base. Using a two-person team, lift base from carton and place base
in desired location (Fig. 1). CAUTION: Avoid fingers getting caught under base!
Press the spring loaded lock located under foot pedal to remove pedal and set aside (Fig. 2).
emove base lid from base frame and set aside (Fig. 3). emove (4) add-on weight
containers from base frame (Fig. 4).
(Fig. 2)
S T E P 2 Operating Rolling Base
To move your base/umbrella to a new desired location, firmly step down on the base foot
pedal to unlock base wheels (Fig. 12). oll base to new location (Fig. 13). Firmly step down
on foot pedal again to lock wheels and position in place (Fig. 12).
(Fig. 12)
(Fig. 13)

43
emove rotating hub from the main frame (sold separately) by removing the (2) bolts and
(2) washers (Fig. 5) from lower backside of umbrella. Set aside bolts and washers for later
use. Now, place rotating hub onto base frame and secure with supplied (5) hub bolts and
washers included with umbrella (Fig. 6).
6mm Hexagon
Wrench
(Fig. 5)
(Fig. 6)
(Fig. 7)
emove caps from each add-on weight container (Fig. 7). The containers hold up to
230 lbs. of sand. Fill each add-on weight with playground sand (Fig. 8) and secure with caps.
Place each add-on weight container back into base frame sections (Fig. 9). Note: Add-on
weight containers only fit one direction.
8mm Hexagon Wrench
Carefully place base lid onto base frame (Fig. 10). e-attach foot pedal (Fig. 11). Your base is
now ready for umbrella installation. Please refer to umbrella manual for installation
instructions. NOTE: You may roll assembled base to desired location prior to installing
umbrella onto base. Proceed to Step 2 for instructions how to operate base.
(Fig. 8)
(Fig. 9)
(Fig. 10)
(Fig. 11)

43
emove rotating hub from the main frame (sold separately) by removing the (2) bolts and
(2) washers (Fig. 5) from lower backside of umbrella. Set aside bolts and washers for later
use. Now, place rotating hub onto base frame and secure with supplied (5) hub bolts and
washers included with umbrella (Fig. 6).
6mm Hexagon
Wrench
(Fig. 5)
(Fig. 6)
(Fig. 7)
emove caps from each add-on weight container (Fig. 7). The containers hold up to
230 lbs. of sand. Fill each add-on weight with playground sand (Fig. 8) and secure with caps.
Place each add-on weight container back into base frame sections (Fig. 9). Note: Add-on
weight containers only fit one direction.
8mm Hexagon Wrench
Carefully place base lid onto base frame (Fig. 10). e-attach foot pedal (Fig. 11). Your base is
now ready for umbrella installation. Please refer to umbrella manual for installation
instructions. NOTE: You may roll assembled base to desired location prior to installing
umbrella onto base. Proceed to Step 2 for instructions how to operate base.
(Fig. 8)
(Fig. 9)
(Fig. 10)
(Fig. 11)

25
(Fig. 1)
(Fig. 3)
(Fig. 4)
S T E P 1 Base Assembl
Select area to assemble base. Using a two-person team, lift base from carton and place base
in desired location (Fig. 1). CAUTION: Avoid fingers getting caught under base!
Press the spring loaded lock located under foot pedal to remove pedal and set aside (Fig. 2).
emove base lid from base frame and set aside (Fig. 3). emove (4) add-on weight
containers from base frame (Fig. 4).
(Fig. 2)
S T E P 2 Operating Rolling Base
To move your base/umbrella to a new desired location, firmly step down on the base foot
pedal to unlock base wheels (Fig. 12). oll base to new location (Fig. 13). Firmly step down
on foot pedal again to lock wheels and position in place (Fig. 12).
(Fig. 12)
(Fig. 13)

Thank you for purchasing Treasure Garden’s Cantilever olling Base.
Please remove all contents from the package, inspect and review parts list.
CAUTION: To reduce personal injury and damage to your base or umbrella, read and
follow this instruction manual. We recommend a two-person team for assembly and
disassembly. Save information for future reference.
61
1 BaseCover 1
2 Steel Base Frame with wheels 1
3 Add-On Weight Containers 4
4 Pedal 1
5 Playground Sand (not included) 230 lbs.
BASE-13R PART LIST
Part Description Qty.
CAUTION: Make sure fingers, toes and any other parts of the body are clear from
under the base when operating base foot pedal. Failing to do so may result in
serious injury.
REQUIRED FOR ASSEMBLY:
• 230 lbs. playground sand or all-purpose sand (not included).
IMPORTANT:
• Allow ample height to avoid damage to your umbrella during assembly and usage.
• Choose a location that is level and sturdy.
• Avoid any sloping or soft ground.
NOTE: Some parts may be included in the styrofoam packaging. DO NOT discard any
packaging or box until assembly is complete.
WARRANTY:
Treasure Garden warrants this product
(in residential use) to be free from
defects in original materials and
workmanship for a period of 2 year from
the date of purchase. If a defect in the
original material or workmanship
appears during the warranty period;
Treasure Garden will (at its option) repair
or replace the product without charge.
Simply contact your original authorized
Treasure Garden dealer with a
description of the defect. The dealer will
verify the defect and work closely with
Treasure Garden to obtain the necessary
service. In many cases, simple problems
can be solved with a replacement part
that can be shipped directly to the dealer
for professional installation / repair.
In the event that warranted factory
service is required, Treasure Garden will
assume the responsibility of the return
freight charges on warranted product for
the first year only.
eturned product that (upon receipt and
inspection) is deemed to be “not
covered” under our warranty, will be
shipped / billed at your expense.
This warranty gives you specific legal
rights, and you may have other rights
which vary from state to state.
RUST: ust is a natural part of the
aging process of steel or iron based
materials, and is therefore NOT
considered a defect.
NOTE: Failure caused by unreasonable
or abusive use, or failure caused by
neglect of reasonable and necessary
care are not covered by this warranty.
Additionally, acts of nature (including but
not limited to wind, hurricanes,
tornadoes, and storms) are not covered
by this warranty.

BASE-13R
Up to 400 lbs.
Cantilever Rolling Base
Assembly and Operation Guide
www.treasuregarden.com
©2018 Treasure Garden, Inc. - All ights eserved. 12/18