TRENDnet TEW-647GA User manual

TEW-647GA
2.01
Quick Installation Guide

Table of Contents
English ...................................................................................................... 1
1
2
1. Before You Start
2. Hardware Installation ..........................................................................
.................................................................................
Table of Contents
Version 06.16.2009
Troubleshooting ........................................................................................ 10

Installation Requirements
Application
Package Contents
1. Before You Start
English
1
?
?
?Multi-Language Quick Installation
Guide
?
?
TEW-647GA
User's Guide CD-ROM
1 x Cat. 5 Ethernet Cable
(60cm/ 2ft)
PowerAdapter (12V, 0.5A)
?
?Wireless router (e.g. TEW-639GR).
?An available DHCP Server –wireless routers usually have a built-in
DHCP server.
?Agame console with an Ethernet port.
Acomputer with a network adapter installed.
300Mbps Wireless N
Gigabit Router
(TEW-639GR)
Cable/DSL
Modem
Internet
Wireless N Gaming Adapter
(TEW-647GA)
OR XYB
A
XYB
A
USB to 10/100Mbps Adapter
(TU2-ET100) OR

2. Hardware Installation
English
2
Note: There are two methods for configuring the gaming adapter: Wi-Fi
Protected Setup (WPS) Push Button Setup or Manual Setup. If your wireless
router does not support WPS, go to section 2.2 Manual Setup. If your wireless
router does support WPS, please follow the directions in section 2.1 Wi-Fi
Protected Setup (WPS) Push Button Setup.
2.1. Wi-Fi Protected Setup (WPS) Push Button Setup
2. Press the WPS button on your
wireless router. The example
shows a TEW-639GR.
3. Press the WPS button on the
TEW-647GA.The WPS button will
start to blink.
4. Once the WPS button becomes
steady, theTEW-647GAhas been
successfully configured.
1. Plug the power adapter into the
TEW-647GAand then into an
available power outlet.

English
3
6. Congratulations, the installation is
now complete.
1. Insert Utility CD-ROM into your
computer's CD-ROM drive.
2. Click Run Setup.exe (Windows
Vista only)
2.2. Manual Setup (For Windows Users)
Note: Manual Setup requires a Windows PC.
5. Connect an Ethernet cable from
the LAN port on the TEW-647GAto
an Ethernet port on your game
console.

English
4
4. Click I accept the terms in the
LicenseAgreement and then click
Next.
5. Connect the provided RJ-45 cable
from the Ethernet port on your
computer to the Ethernet port on
the TEW-647GA. Then click Next.
6. Connect theAC PowerAdapter to
theAccess Point and then to a
power outlet and then click Next.
3. Click Setup Wizard.

English
5
10. Select Manual Setup and then
click Next.
9. Enter a new password, retype the
new password and then click
Change.
8. Enter your password and then click
Login. By default, there is no
password.
7. Select the TEW-647GAfrom the
list and then click Configure.

English
6
14. Click Next.
11. Select 'Dynamic IPAddress'
Configuration and then click
Next.
12. Click Site Survey.
13. Select the SSID for your wireless
router and then click Select.

English
7
18. Click Apply.
16. Click Save (Optional).
15. If encryption is enabled on your
wireless network, the correct
Wireless Mode, Security Mode,
WPAMode and CipherType will
be selected. Enter your
Pre-Shared key and then click
Next. This example shows
WPA-PSK.
17. Give the file a name, then click
Save (optional).

English
8
21. Click Yes to exit.
20. Click Exit.
19. Connect the RJ-45 cable from the
Ethernet port on the TEW-647GA
to the Ethernet port on your game
console. Then Click Next.