TRENDnet TU2-ET100 User manual

- i -

ii
Table of Contents
1. Introduction.......................................................................................................1
Features........................................................................................................................ 1
Package Contents.......................................................................................................... 1
System Requirements ................................................................................................... 1
LED Status................................................................................................................... 2
2. Installation.........................................................................................................3
Windows 7/ Vista.......................................................................................................... 3
Windows XP................................................................................................................. 5
Windows 2000.............................................................................................................. 7
Windows ME................................................................................................................ 9
Windows 98SE........................................................................................................... 12
Verifying the Driver Installation in Windows.............................................................. 16
Mac 10.6x................................................................................................................... 17
Mac 10.5x................................................................................................................... 20
Mac 10.4.x.................................................................................................................. 23
Configuring Network Settings and Making a Connection ....................................................25
Mac OS X 10.1.x ~ 10.3.x .......................................................................................... 27
3. Specifications..................................................................................................31
Limited Warranty.................................................................................................32

1
1. Introduction
The TU2-ET100 is a high speed USB network adapter that allows you to instantly
connect to a 10/100Mbps network from a USB enabled desktop or Notebook PC.
Compliant with USB 2.0 and backwards compatible with the USB 1.0 and 1.1, you
can share files and printers and also gain access to broadband Internet to explore
valuable resources on the web.
Features
Compliant with USB 2.0 and 1.1 specifications
Compliant with IEEE 802.3 and 802.3u standards
Supports both full-duplex and half-duplex operations
Supports Suspend mode and Hibernate mode to remote wake-up through
link-up or magic packet
Compliant with Windows 7/Vista/XP/2000/ME/98SE or Mac OS 10.1~10.6
Powered by USB port. No external power adapter required
Diagnostic LEDs
Plug & Play for easy Installation
Package Contents
Before installation, please check the items of the package. The package should
contain the following items:
TU2-ET100
CD-ROM(Driver & User’s Guide)
Multi-Language Quick Installation Guide
System Requirements
CPU: 300MHZ or above
Memory: 256MB RAM or above
Computer With An Available USB 1.1 or 2.0 Port
Windows7 (32/64-bit) / Vista (32/64-bit) / XP (32/64-bit) / 2000 / ME / 98SE;
Mac OS X 10.1 ~ 10.6

2
LED Status
LED Color Description
100Mbps Green On for 100Mbps
Off of 10Mbps or not connected
Link Green LAN activity. Blinking when there is data flow between LAN and
the host computer.

3
2. Installation
Windows 7/ Vista
1. Insert the Driver CD-ROM into your CD-ROM Drive.
2. Click Run Install.exe
3. Click Install Driver to install the driver.

4
4. Click Next.
5. Click Install.
6. Click Finish.
7. Remove the CD-ROM from your computer’s CD-ROM drive.
8. Connect the Adapter to an available USB port of your computer
9. Drivers will install automatically
10.Connect a Network cable from the TU2-ET100 to a Switch, Router or
Cable/DSL Modem.

5
Windows XP
1. Insert the Driver CD-ROM into your CD-ROM Drive.
2. Click Install Driver to install the driver.
3. Click Next.
4. Click Install.

6
5. Click Finish.
6. Remove the CD-ROM from your computer’s CD-ROM drive.
7. Connect the Adapter to an available USB port of your computer
8. Drivers will install automatically
9. Connect a Network cable from the TU2-ET100 to a Switch, Router or
Cable/DSL Modem.

7
Windows 2000
1. Insert the Driver CD-ROM into your CD-ROM Drive.
2. Click Install Driver to install the driver.
3. Click Next.
4. Click Install.

8
5. Click Finish.
6. Remove the CD-ROM from your computer’s CD-ROM drive.
7. Connect the Adapter to an available USB port of your computer
8. Drivers will install automatically
9. Connect a Network cable from the TU2-ET100 to a Switch, Router or
Cable/DSL Modem.

9
Windows ME
1. Insert the provided CD into your CD-ROM drive, then Click Exit.
2. Connect the Adapter to an available USB port of your computer
3. When the follow screen pop up, select Specify the location of the driver
(Advanced)

10
4. When the screen below appears, click Browse to navigate to
D:\Driver\Win98_ME where D: is your CD-ROM drive letter. Then click Next.
5. Click Next
6. Click Finish.

11
7. When prompted, click Yes to restart your computer.
8. Connect a Network cable from the TU2-ET100 to a Switch, Router or
Cable/DSL Modem.

12
Windows 98SE
1. Insert the provided CD into your CD-ROM drive, then Click Exit.
2. Connect the Adapter to an available USB port of your computer
3. Upon your USB device connection, Windows will detect the new device and
pop up the following screen. click Next.

13
4. Select Search for the best driver for your device. Click Next.
5. Select Specify a location and click Browse to navigate to
F:\Driver\Win98_ME where F: is your CD-ROM drive letter. Then click Next.
6. Click Next.

14
7. If the system prompts you for the Windows 98SE CD-ROM, click OK.
Remove the provided CD and insert the Windows 98SE CD-ROM. Then click
OK again.
8. If the screen below appears, click OK.
9. In the drop-down list, select F:\Driver\Win98_ME and click OK.

15
10. Click Finish.
11. When prompted, click Yes to restart your computer.
12. Connect a Network cable from the TU2-ET100 to a Switch, Router or
Cable/DSL Modem.

16
Verifying the Driver Installation in Windows
To verify your Ethernet adapter installation, select Control Panel > System >
(Hardware) > Device Manager. In the Network adapters group, ASIX AX88772
USB2.0 to Fast Ethernet Adapter should be displayed.
If there is a question or exclamation mark next to that item, then the driver is not
properly installed. Please delete the item and repeat the installation steps.
*The example screenshot is under Windows XP.

17
Mac 10.6x
1. Connect the Ethernet adapter to a free USB port. There system will pop up a
message “A new network interface has been detected”
2. If the message not pop up , please Start System Preferences and select
Network, then click the ”＋” to add an “USB Ethernet “ service .

18
3. Select “USB Gigabit Ethernet “ then click “Advanced” to setting the network
by static IP or thru DHCP way.
4. by “ Using DHCP” Mode , please Click” Renew DHCP License “to get the IP
address , Else you have to enter the related information from your network
service provider .