TRENDWOO BEAT IT User manual

www.trendwoo.com

PACKAGING CONTENT
1x Beat it Bluetooth Speaker
1x User Manual
1x USB Charging Cable
1x AUX 3.5mm Audio Cable
BUTTONS

TURN ON & BLUETOOTH CONNECTED
1. Switch the On/Off button to power on.
2. You will hear a beep. Wait for the LED light to flash BLUE.
These indicators mean the speaker is ready to pair.
3. Enable Bluetooth on device. “Settings” > enable “Bluetooth”
4. Scan for device and select “Tr-Beat it” from the devices list.
5. When pairing is successful, you will hear a beep and the LED light will illuminate BLUE. This is a
one-time event per device.
AUX AUDIO-IN CONNECTED
Your “BEAT IT” speaker also can be connected via 3.5mm stereo input. When connected via a
3.5mm stereo input, the speaker’s control panel functions, such as the Play/ Pause and Volume
& Track Controls, will not work. These functions can only be controlled from your audio source.
USING AS A SPEAKERPHONE
Your “BEAT IT” speaker can be used as a noise cancelling speakerphone, press the answer-end
button on the “BEAT IT” speaker when you have an incoming phone call. When you’re done,
simply press the answer-end button again to end the call. To reject a call, press and hold the
answer-end button.
CHARGEING YOUR “BEAT IT” SPEAKER
First use your “BEAT IT”speaker ,please charge it until the battery light turn off.
When your “BEAT IT”speaker battery power low than 10%,the battery light will turn red, please
charge it until the battery light turn off .
Note:please use the 5V/1A charge your “BEAT IT”speaker.
SPECIFICATIONS
Bluetooth: 4.0+EDR
Bluetooth Profile: A2DP, AVRCP
Bluetooth Transmission Distance:10m
3.5mm Aux-in
Speaker Diameter: 45mm
Power Output: 5W x 2
Frequency Response: 180Hz - 20KHz
Built-in Microphone
Size:179*80*71mm

See more online: www.trendwoo.com