TREQ ACE User manual

TREQ ACE
INSTRUCTION MANUAL
The setup of your rig is very dependent on body type, personal seating preferences and the
equipment you own, but to give you a head start, we included a setup scheme on the last page.
REQUIRED TOOLS:
5-6 mm

GENERAL INSTRUCTIONS
www.treq-sim.com
123
Click!
123
Break!
REQUIRED TOOL:
The easiest way to mount the click-in-nuts, is to slide them in from one side of the profile. But
don't worry if you need to put in a click-in-nut in a profile which has both ends already closed: it
is also possible to push them in the T-slot anywhere you like!
The corner brackets feature 4 little hooks to stop the bracket from rotating once it is mounted
on a profile. But on some places of the rig these corner brackets are placed on a 90° angle of
the T-slot. In these situations it is recommended to break off 2 of the hooks, which is easily
done with a screwdriver.

1
2x 2x
2x
Profile 16040 L=1185
Profile 4040 L=478
Profile 16040 L=500
2x
Profile 4040 L=500
1x
Profile 8040 L=478
www.treq-sim.com
Profile 12040 L=740
2x
2x
Profile 8040 L=90
Pedal Bracket Left
1x
Wheel Mount Bracket
1x
1x
32x
Corner 4040
Corner Cover 4040
32x
Cover 4040
4x 4x
Cover 12080
Pedal Bracket Right
2x
Profile 8040 L=580
4x
Cover 16080

78x
Click-in Nut M8
www.treq-sim.com
68x
M8x16 Corner 8080
2x
Clamp M8x20
4x
2x
Cover 4080
WHEEL BASE / PEDAL
MOUNTING
M6x12 Screw 2
M6x16 (Socket Head) 7
M6x20 (Socket Head) 2
M6x25 (Socket Head) 2
M6 Washer 4
M6 T-Nut Click-in-Nut 4
CABLE MANAGEMENT
M4x12 Screw 5
M4 T-Nut Click-in-Nut 5
Cable Binder 5
RUBBER FEET
M5x12 (Socket Head) 4
M5 T-Nut Click-in-Nut 4
Rubber Foot 4
M8 BOLTS AND WASHERS
M8x16 (Socket Head) Black 6
M8x20 (Socket Head) Black 12
M8x20 (Sunken Head) Black 4
M8 Washer 10
Bags with bolts, nuts and washers:
You can use these on any place you like. Either
inside the profile slot (just turn the bolt through
the tape), or by pasting them.

3
www.treq-sim.com
M8
(16x)
M5
(4x)
M5
(4x)
Profile 16040 L=1185 (2x)
2
(4x)
M5x12
(4x)
(These come from the ‘Rubber Feet’ bag)

3
4
www.treq-sim.com
M8
(12x)
M8x16
(16x)

5
6
www.treq-sim.com
Profile 4040 L=500 (2x)
M8
(4x)
M8x16
(8x)
Break the
pins!
The width of the two 4040
profiles is depended on your
seat, so you might want to
wait before tightening them!

7
8
www.treq-sim.com
Profile 12040 L=740 (2x)
M8
(8x)
M8
(16x)
Break the
pins!

9
10
www.treq-sim.com
M8x20
(Black)
(2x)
M8
(2x)
Assembly of Pedal Bracket
M8x20
(Black)
(6x)
Profile 8040 L=478 (1x)
Profile 4040 L=478 (2x)
Assemble the Pedal Bracket on Frame
Hand
greep (4x)

11
12
www.treq-sim.com
Assembly of Wheel Mount Assembly
M8
(14x)
Profile 8040 L=580 (1x)
M8
(10x)
Profile 8040 L=90 (2x)

13
14
www.treq-sim.com
M8x16
(8x)
M8
(4x)
170mm 170mm

15
16
www.treq-sim.com
(2x)(4x)
M8x16
(8x)

15
16
www.treq-sim.com
M8
(6x)
M8x16
(Black)
(6x)
M8x16
(12x)
Assembly of Wheel Mount Assembly on Frame

17
www.treq-sim.com
Adjust Pedal Bracket and Wheel Mount Assembly to desired position (see step 19 for a
setup drawing).

18
www.treq-sim.com
(4x)
(26x)
(4x)
(4x)

www.treq-sim.com
OPTIONAL: Some pedals, like Thrustmaster or Logitech, have threaded holes on the
bottom of the pedal base. To mount these type of pedals, please use the spare corner
brackets. Mount 1 side to a pedaldeck-profile and the other to the pedals.
For Fanatec or Heusinkveld pedals you can use click-in-nuts and mount them ‘from the
top’.

19
www.treq-sim.com
Setting up your rig in the perfect way can take a lot of time and adjustments. Everybody is
different, and with the enormous amount of sim racing gear available, it is impossible to draw you
the perfect seating position. But this page should help you when tightening all the bolts for the
first time. After you’ve built it up like this, you can then fine tune it to your own preferences.
Body length: 160 cm
A: 50 cm
B: 60 cm
C: 73 cm
When first building your rig, we recommend putting S on 31 cm. Don’t tighten
the bolts of the steering rack too much, because there is a big chance you’re
going to adjust it after you mount a steering wheel.
Body length: 180 cm
A: 55 cm
B: 65 cm
C: 78 cm
Body length: 200 cm
A: 60 cm
B: 70 cm
C: 83 cm