Trevi LTV 2016HD User manual

LTV 2016HD
16” HD LED TV with DVB-T/CI

Power Cord Connection
AV Connection
YPbPr Connection
Antennas Connection
8
9
9
8
7
7
10
10
3
3
SAFETY
PRECAUTIONS
2
1PREFACE
FRONT AND
CONNECTIONS
OF THE TV
6
4
5
REMOTE CONTROL
6
INSTALLATION
BASIC
IN THE CARTON 5
3
7
15
20
Select Input Source
Sound Menu
BACK
OSD menu
Picture Menu
Channel Menu
16
18
1
14
Remote control setup
29
Media (Multimedia)Menu
23
Lock Menu
25
Setup Menu
28
ATV/SCART/HDMI/AV/YPbPr/PC Menu
DTV Menu
16

832
34
9
35
10
If you're having
problems
Your TV's
specification
Wall mounting
assembly
instruction
2

1. PREFACE
Thank you for buying this TV !Please read this manual throughly before operating the TV.
Make sure the TV was not damaged in transit.Should the TV is damaged,do not install
your dealer.Check that you have all the accessories according to the model.
it and contact
2. SAFETY PRECAUTIONS
Power cord and cables must be properly routed and protected to prevent
people from stepping on them and causing the TV to fall.
Put the TV on a stable surface.
Do not place any material on the TV.
Do not block or cover the ventilation openings on the TV.
If you have a wall mount,check that it is steady.
Do not use the with fixtures other than those provided or
suggested by the manufacturer.
TV
3

Keep the TV dry and away from humidity.
Keep the TV away from heat sources .
Unplug the before cleaning it.Do not use solvent or liquidTV to clean
the TV.
Only clean the TV with a soft and dry cloth.
In case of troubleshooting,do not use spare parts other than those
suggested by the manufacturer.Using inadequate spare parts can
shocks,short-circuits fire or other incidents.lead to electric
Unplug the TV during lightening storms or when unused for long periods
of time.
4

3. IN THE CARTON
Remote Control
User Manual
User Manual
TV SET
5
Switch Adaptor
DTV PC AUDIO S LEEP
ASPEC T

1.DC IN:Main power input.
2.Headphone:Connect the earphone.
3.PC AUDIO: Connect the Audio output jack of PC.
4.VGA: Connect the PC-RGB output jack of PC.
5.YPbPr: Connect the YPbPr output jack of DVD.
6.SCART: Connect the SCART jack of VCR or DVD.
7.Video: Connect the VIDEO output jack of DVD.
.R/L: Connect the R/L audio output jack of DVD.8
.Coax:Connect the SPDIF
1 .RF: Connect the antenna.
11.HDMI: Connect the HDMI output jack of DVD.
12.USB: Connect to portable USB device.
13.CI: Connect to the CI card.
9 a suitable amplifier.
0
4.FRONT AND BACK CONNECTIONS OF LED TV
6
STANDBY
SOURCE
MENU
CH-
CH+
VOL-
VOL+
HDMIRF USBCoax CI
VGA
Head
phone
PC
Audio Video RL
SCART
YPbPr
DC IN

Power Cord Connection
5. BASIC AINSTALL TION
Antennas Connection
- Connect the power cord and AC adaptor correctly as shown.
- Press the STANDBY switch of your TV to switch the unit on. The power indicator on the
front panel lights up in green or blue.
To ensure good picture and sound, TV antenna system needs to be installed. The antenna system as
shown can be sourced from TV equipment shops, which will provide service for correct installation
and connection. After installation, insert the 75-OHM antenna plug into the antenna jack as shown.
7
AC Adaptor
POWER Cord
DC IN

Connect the VIDEO and AUDIO output jack of the DVD or VCR to the AV IN jacks on the set using
the RCA cable (Yellow [video], White and RED [left & Right audio]).
Select the AV input source using the SOURCE button on the remote control.
Connect the YPbPr/YCbCr output of the DVD or VCR to the YPbPr input on the set.The picture
quality is improved compared to connecting a regular VCR to the video input. Connect the Audio output of
the DVD or VCR to the Audio input jacks on the set using the RCA cable.(3.5mm plug-2 X RCA plug)
Match the jacks colours: Y is green, Pb is blue, Pr is red, Audio left is white and Audio right in red.
Select YPbPr input source using the SOURCE button on the remote control.
8
PC
Audio
Head
phone VGA Video RL
SCART
YPbPr
DC IN
PC
Audio
Head
phone VGA Video RL
SCART
YPbPr
DC IN

Connect the RGB output of the PC to the VGA jack on the set. Connect the AUDIO output of the PC to the PC
AUDIO jack on the set. Select the PC input source using button on the remote control.SOURCE
HDMI connection allows the user to transfer both audio and video control signals through one cable only.
These signals are transferred in digital.
9
HDMIRF USBCoax CI
PC
Audio
Head
phone VGA Video RL
SCART
YPbPr
DC IN