Tricel 102212 User manual

IP43 RATED COMMERCIAL
ELECTRIC METER ENCLOSURE
1000 x 750 x 300MM SINGLE DOOR
COMPLIES TO IEC 62208:2011
STOCK CODE: 102212

* Approximate dimensions.
In accordance with Tricel’s normal policy of product development these specications are subject to change without notice.
STOCK CODE:
102212
DIMENSIONS
Dimensions: 1000mm high x 750mm wide x 300mm deep
The overall height of this box is 1066mm and overall width is 754mm.
The opening size is 971mm x 678mm*
KEY FEATURES
• Electromagnetic compatibility, ideal for protecting internal
electronic communication.
• Suitable for low-voltage switchgear and control gear assemblies,
meters, compressors, etc.
• Will not corrode, weather resistant to IP43 grade protection.
• High impact resistance up to 20 Kilojoules (IK10).
• Double insulation and electrically non-conductive (1000V).
• Triple lock system supported by non-corrosive vertical bars.
• Door hinges on right, 180º opening.
• Easily cleaned and can be painted.
SPECIFICATIONS
• Constructed from Glass Reinforced Polymer (GRP).
• Supplied with hinges, lock and key.
• Polyester back mounting plate (optional) available.
• Supplied in light grey colour (Ral 7035).
• Suitable for use in temperatures ranging from -30ºC to +70ºC.
• Made from non-hygroscopic material ensuring minimum water
absorption.
• Constructed from halogen-free and self-extinguishing material.
• UV protected.
IP43 RATED COMMERCIAL
ELECTRIC METER ENCLOSURE
1000 X 750 X 300MM
COMPLIES TO IEC 62208:2011
Suitable for electrical and commercial installations.
Complies with the international standard for empty enclosures as
applied to low-voltage switchgear and control gear assemblies (IEC
62208:2011).
Example: photovoltaic nh-fuses
TRICEL UK
Tel: [phone]
Registered number 02868648
TRICEL IRL
Tel: [phone]
Registered number IE 075014
102212-1177670/1-NOV2022
1066mm
300mm
754mm

* Approximate dimensions.
In accordance with Tricel’s normal policy of product development these specications are subject to change without notice.
ASSEMBLY INSTRUCTIONS
SEAL AND KIOSK BODY
TRICEL UK
Tel: [phone]
Registered number 02868648
TRICEL IRL
Tel: [phone]
Registered number IE 075014
STOCK CODE:
102212 IP43 RATED COMMERCIAL
ELECTRIC METER ENCLOSURE
1000 X 750 X 300MM
COMPLIES TO IEC 62208:2011
102212-1177670/1-NOV2022

* Approximate dimensions.
In accordance with Tricel’s normal policy of product development these specications are subject to change without notice.
TRICEL UK
Tel: [phone]
Registered number 02868648
TRICEL IRL
Tel: [phone]
Registered number IE 075014
STOCK CODE:
102212 IP43 RATED COMMERCIAL
ELECTRIC METER ENCLOSURE
1000 X 750 X 300MM
COMPLIES TO IEC 62208:2011
102212-1177670/1-NOV2022
SEAL ASSEMBLY INSTRUCTIONS
BOTTOM SEAL
Tools Required: Scissor or Knife
STEP 1:
• Get the bag labelled (BO-1-Bottom)
• Trim seals to required length along front and back sections. Do not cover tabs.
• Remove the adhesive strip and apply slight pressure against the panel surface
to ensure the seals adhere.

* Approximate dimensions.
In accordance with Tricel’s normal policy of product development these specications are subject to change without notice.
TRICEL UK
Tel: [phone]
Registered number 02868648
TRICEL IRL
Tel: [phone]
Registered number IE 075014
STOCK CODE:
102212 IP43 RATED COMMERCIAL
ELECTRIC METER ENCLOSURE
1000 X 750 X 300MM
COMPLIES TO IEC 62208:2011
102212-1177670/1-NOV2022
SEAL ASSEMBLY INSTRUCTIONS
RIGHT SEAL
STEP 2:
• Once two side panels are tted you need two seals on either side panel, a seal
for the front and the rear of both panels will be needed.
• Starting with the right panel get the bag labelled (BO-4-Left&Right) and use
the smaller of the two seals to begin with.
• Measure from the top of the side panel down to the bottom panel and cut seal
to length.
• Once the seal is cut, remove the adhesive and apply to the surface keeping the
pressure down to ensure the seal sticks.
• Locate larger seal and apply to the rear of the panel as shown.

* Approximate dimensions.
In accordance with Tricel’s normal policy of product development these specications are subject to change without notice.
TRICEL UK
Tel: [phone]
Registered number 02868648
TRICEL IRL
Tel: [phone]
Registered number IE 075014
STOCK CODE:
102212 IP43 RATED COMMERCIAL
ELECTRIC METER ENCLOSURE
1000 X 750 X 300MM
COMPLIES TO IEC 62208:2011
102212-1177670/1-NOV2022
SEAL ASSEMBLY INSTRUCTIONS
LEFT SEAL
STEP 2:
• Get the bag labelled (BO-4-Left&Right)
and measure the length from top to
bottom of the panel.
• Remove adhesive strip and press onto
the surface ensuring it is even along the
surface.
• Next, measure the distance from the end of the seal to the inside of the panel
where no seal is evident.
• Cut two small tabs to make the front of the panel fully sealed.
• Finally, add seal to the bottom panel and meet the seal at side panel.
• Attach seal to the nal left hand section as shown below.
• Then, apply seal to the nal section on the right hand side.

* Approximate dimensions.
In accordance with Tricel’s normal policy of product development these specications are subject to change without notice.
TRICEL UK
Tel: [phone]
Registered number 02868648
TRICEL IRL
Tel: [phone]
Registered number IE 075014
STOCK CODE:
102212 IP43 RATED COMMERCIAL
ELECTRIC METER ENCLOSURE
1000 X 750 X 300MM
COMPLIES TO IEC 62208:2011
102212-1177670/1-NOV2022
SEAL ASSEMBLY INSTRUCTIONS
TOP COVER SEAL
STEP 3:
• To assemble the kiosk, get the top cover and the bag labelled (BO-3-Back). The
seal is pre-cut for assembling.
• Once the metal pins are in place, the seal should begin by going around the
pins and following the ow of the panel.
• Once again, remove the adhesive tape and place pressure on the seal to ensure
it sits correctly.
STEP 4:
• When the top panel is tted get the bag labelled (BO-2-TOP) and measure the
sections along the top panel.
• Do not cover the tabs as this will be completed at a later step.
Cut at location indicated with
arrow above if required
Place the seal in line
with tab

* Approximate dimensions.
In accordance with Tricel’s normal policy of product development these specications are subject to change without notice.
TRICEL UK
Tel: [phone]
Registered number 02868648
TRICEL IRL
Tel: [phone]
Registered number IE 075014
STOCK CODE:
102212 IP43 RATED COMMERCIAL
ELECTRIC METER ENCLOSURE
1000 X 750 X 300MM
COMPLIES TO IEC 62208:2011
102212-1177670/1-NOV2022
• Measure and cut the seal as shown in the image above.
• Once the seal is cut, remove the yellow tape and stick it to the surface.
• Ensure the tab isn’t covered and that the top of the seal is aligned with the
bottom of the tab.
• Cut the shown tabs out from the top cover seal. Cut the shown tabs out from
the top cover seal.
SEAL ASSEMBLY INSTRUCTIONS
TOP COVER SEAL
Cut out tabs as shown to allow for full sealing. Continue sealing along the front cover of the top
cover until all sections are complete.

* Approximate dimensions.
In accordance with Tricel’s normal policy of product development these specications are subject to change without notice.
TRICEL UK
Tel: [phone]
Registered number 02868648
TRICEL IRL
Tel: [phone]
Registered number IE 075014
STOCK CODE:
102212 IP43 RATED COMMERCIAL
ELECTRIC METER ENCLOSURE
1000 X 750 X 300MM
COMPLIES TO IEC 62208:2011
102212-1177670/1-NOV2022
SEAL ASSEMBLY INSTRUCTIONS
FINAL SEALING - TOP & BOTTOM PANEL
STEP 5:
Bottom Panel
• Get the bag labelled (BO-1-Bottom) and measure across until it
meets the seal descending from the right-hand side panel.
• Remove the adhesive tape and stick to the tabs and seal already
present.
Ensure the tabs are
covered
Top Panel
• Like on the bottom panel, get bag labelled (BO-2-TOP) and begin
on the left-hand side starting where the seal nished on the side
panel.
• Measure along the top panel and cut where the seal meets the
right panel.

* Approximate dimensions.
In accordance with Tricel’s normal policy of product development these specications are subject to change without notice.
KIOSK BODY ASSEMBLY INSTRUCTIONS
1. Assemble the 2 sides rst. The pre-drilled holes with inserts are to be kept
at the back of the base plate.
2. Insert the screws to attach the sides to the base, do not fully tighten the
screws at this stage. Turn kiosk around, the back of the kiosk facing you.
3. Assemble the back plate to the sides, inserting screws, again do not fully
tighten at this stage at 4 corners.
TRICEL UK
Tel: [phone]
Registered number 02868648
TRICEL IRL
Tel: [phone]
Registered number IE 075014
STOCK CODE:
102212 IP43 RATED COMMERCIAL
ELECTRIC METER ENCLOSURE
1000 X 750 X 300MM
COMPLIES TO IEC 62208:2011
102212-1177670/1-NOV2022

4. Insert longer dowels at the top of the back plate.
5. Insert the top plate.
6. Insert the 4 screws to attach the top plate to the sides.
7. Fully tighten all of the screws throughout the kiosk.
8. Insert the back plate and tighten screws.
* Approximate dimensions.
In accordance with Tricel’s normal policy of product development these specications are subject to change without notice.
TRICEL UK
Tel: [phone]
Registered number 02868648
TRICEL IRL
Tel: [phone]
Registered number IE 075014
KIOSK BODY ASSEMBLY INSTRUCTIONS
STOCK CODE:
102212 IP43 RATED COMMERCIAL
ELECTRIC METER ENCLOSURE
1000 X 750 X 300MM
COMPLIES TO IEC 62208:2011
102212-1177670/1-NOV2022

* Approximate dimensions.
In accordance with Tricel’s normal policy of product development these specications are subject to change without notice.
TRICEL UK
Tel: [phone]
Registered number 02868648
TRICEL IRL
Tel: [phone]
Registered number IE 075014
DOOR ASSEMBLY
NOTE: weather seal to be applied to obtain specied weather protection (IP rating)
9. To attach the door, push down the bottom hinges, it will be placed in the
groove located at the bottom corner and top corner. Hinges to be turned
90⁰ to lock in place.
10. Push in the brass tting and slide the lock cover up, turning clockwise with
the key and pull out the handle.
11. Close the door as normal pulling down the handle to lock in place.
STOCK CODE:
102212 IP43 RATED COMMERCIAL
ELECTRIC METER ENCLOSURE
1000 X 750 X 300MM
COMPLIES TO IEC 62208:2011
102212-1177670/1-NOV2022