Tricity Bendix CDW 087 Product guide

Dishwasher
CDW 087
OPERATING & INSTALLATION
INSTRUCTIONS

2
For the user
Important safety information 3
Description of the appliance 4
The control panel 4
Before use 5
Setting the water softener 5
Rinse aid 7
Using your appliance 8
Loading your appliance 8
Adjusting the height of the upper basket 9
Use of detergent 10
Hints and tips 11
Washing programmes 12
Operating sequence 13
Maintenance and cleaning 14
Internal cleaning 14
Cleaning the filter 14
External cleaning 15
Prolonged periods of non-operation 15
Frost precautions 15
Moving the machine 15
Something not working 16
Service and spare parts 17
Customer Care Department 17
Guarantee conditions 18
Hints for test centres 19
Technical specifications 19
Tricity Bendix Service Force 24
For the installer
Installation instructions 20
Water supply connections 20
Water outlet hose connection 21
Electrical connection 22
Adjusting the worktop 23
Fitting under a counter 23
Levelling 23
IND20en
Contents
Guide to use the instruction book
The following symbols will be found in the text to guide you throughout the instructions:
Safety instructions
1. 2. 3. Step by step
Hints and tips
Environmental information

3
Installation
●This appliance is heavy. Care should be taken when
moving it.
●It is dangerous to alter the specifications or attempt
to modify this product in any way.
●Care must be taken to ensure that the appliance
does not stand on the electrical supply cable.
●Any electrical work required to install this appliance
should be carried out by a qualified electrician or
competent person.
●Any plumbing work required to install this appliance
should be carried out by a qualified plumber or
competent person.
Child Safety
●This appliance is designed to be operated by adults.
Children should not be allowed to tamper with the
controls or play with the product.
●Keep all packaging well away from children.
●Keep all detergents in a safe place out of children's
reach.
During Use
●Items that are contaminated by petrol, paint, steel
or iron debris, corrosive, acidic or alkaline
chemicals must not be washed in this dishwasher.
●Under no circumstances should you open the door
whilst the appliance is in operation.Always turn off
the appliance before opening the door.
●Only use detergent specifically designed for use in
dishwashers.
●Long bladed knives stored in an upright position are
a potential hazard.
●Long and/or sharp items of cutlery such as carving
knives must be positioned horizontally in the upper
basket.
●When finishing loading or unloading close the
door, as an open door can be a hazard.
●Do not sit or stand on the open door.
●Isolate the appliance from the power supply and
turn off the water supply after use.
●Care should be taken when cleaning the bottom
door seal and hinge area as any exposed metal
edges may cut if care is not taken.
●This product should be serviced by an
authorised Service engineer, and only genuine
spare parts should be used.
●Under no circumstances should you attempt to
repair the machine yourself.Repairs carried out
by inexperienced persons may cause injury or
serious malfunctioning. Contact your local
Service Force Centre. Always insist on genuine
spare parts.
Conservation
In the interest of the environment:
●Materials marked with the symbol are
recyclable.
●Check with your local Council or Environmental
Health Office to see if there are facilities in your
area for re-cycling this appliance.
●When the appliance is to be scrapped, cut off
the power supply cable and make the door
closing device unusable to prevent young
children from being trapped inside.
●Help to keep your country tidy - use authorised
disposal sites for your old appliance.
AVV01en
Important safety information
It is most important that this instruction book should be retained with the appliance for future
reference. Should the appliance be sold or transferred to another owner, or should you move house
and leave the appliance, always ensure that the book is left with the appliance in order that the new
owner can get to know the functioning of the appliance and the relevant safety information.
This information has been provided in the interest of your safety.You MUST read it carefully before
installing or using the appliance.

4
1. Water hardness adjustment
2. Levelling spacers
3. Upper basket stop
4. Large filter
5. Salt container
6. Rinse aid dispenser
7. Detergent dispenser
8. Control panel
9. Central filters
10. Lower spray arm
11. Upper spray arm
12. Upper basket
13. Worktop
1.Mains on indicator light
2. On/Off push button
3.Programme guide
4.Door handle
5.Programme marker
6.Programme selector dial
7. Wash programme phase indicator
As the programme progresses, the programme
selector dial turns, to show the phase in the wash
programme the appliance has reached.
Prewash / Rinse and Hold
Wash
Cold rinse
Hot rinse
Drying
APP27en
Description of the appliance
The control panel
1
2
3
4
5
6
7
8
9
10
11
12
13
IN88
12 3 4 5 6 7

5
Before using your dishwasher for the first time:
1. Ensure that the electrical and water connections
comply with the installation instructions.
2. Remove all packaging from inside the appliance.
3. Set the water softener.
4. Pour half a litre of water inside the salt container
and then fill with salt.
5. Fill the rinse aid dispenser.
Setting the water softener
The dishwasher is equipped with a water softener
designed to remove minerals and salts from the water
supply, which would have a detrimental or adverse
effect on the operation of the appliance.
The higher the content of these salts, the harder your
water is.
Water hardness is measured in equivalent scales,
Clarke and French degrees.
The softener should be adjusted according to the
hardness of the water in your area.Your local Water
Authority can advise you on the hardness of the water
in your area.
The dishwasher is factory set at level 2.
If this level is not suitable for your area the softener
should be adjusted.
To adjust the water softener
Level 1
If your water is "level 1" it is already soft and therefore
there is no need to use salt.
Levels 3 and 5 (water softener adjustment)
If your water is level 3 or 5, proceed as follows:
- slide out the lower basket and unscrew the cap of
the salt container;
- turn the two-position selector anticlockwise from
position -to position +with the aid of a blunt knife or
screwdriver.
Levels 4 and 5 (adjustment on the machine)
If your water is level 4 or 5, open the door and drill
membrane (A) on the upper left-hand corner of the
machine.
With a water hardness of level 5 both adjustments
must be made.
PDU08en
Before use
Level Use of
salt
French
degrees
(°TH)
Clarke
degrees
1
2
3
4
5
NO
YES
YES
YES
YES
0 - 10
11 - 27
28 - 35
36 - 49
50 - 63
0 - 14
15 - 39
40 - 50
51 - 70
71 - 90
Water hardness
AA01
A
AA04

6
Filling with salt
Only use salt specifically designed for use
in dishwashers.
All other types of salt not specifically
designed for use in a dishwasher, especially
table salt, will damage the water softener.
Only fill with salt just before starting one of
the complete washing programmes (not the
Rinse and Hold programme).This will
prevent any grains of salt or salty water,
which may have been spilled, remaining on
the bottom of the machine for any period of
time, which may cause corrosion.
To fill:
1. To fill with salt, unscrew the cap of the salt
container.
2. Pour half a litre of water inside the container
(this is necessary only before filling with salt for
the first time).
3. Using the funnel provided, pour in the salt until the
container is full.
Do not worry if water over flows from the unit when
filling with salt, this is quite normal.
4. Replace the cap making sure that there is no trace
of salt on the screw thread or on the gasket.
5. Screw on the cap tightly.
The salt container will require topping up periodically.
The salt cap has a refill indicator window in the centre.
A green float is clearly visible when there is salt
inside the container, and almost disappears when the
salt has finished reminding you to add salt.
SAL03en
SALE
SALT
SALZ
SEL
SR06
SR11

7
Rinse aid
Rinse aid is automatically added during the last rinse,
ensuring thorough rinsing, spot and streak free drying.
The dispenser, which is positioned inside the door,
holds about 110 ml of rinse aid, which is sufficient for
16 - 40 dishwashing programmes, depending upon the
dosage setting.
Filling with rinse aid
1. Open the container by turning the lid (A)
anticlockwise.
2. Add the rinse aid until the container is completely
full.The indicator (B) will be completely dark.
3. Top up the rinse aid when the indicator (B)
becomes clear.
Ensure that the lid is closed after every refill.
Do not put liquid detergent in the rinse aid
compartment. Clean up any rinse aid spilt during filling
with an absorbent cloth to avoid excess foaming
during the next wash.
Adjusting the dose
According to the finish and drying results obtained,
adjust the dose of rinse aid by means of the 6 position
selector (C) (position 1 minimum dosage, position 6
maximum dosage).
Start from position 3.
Gradually increase the dose if there are drops of water
or lime spots on the dishes after washing.Reduce it if
there are sticky whitish streaks on the dishes.
BRI01en
BR01
A
m
a
x
6
5
4
3
2
1
B
BR03
BR02
C
m
a
x
6
5
4
3
2
1

8
Loading your appliance
Before placing dishes in the machine, remove any
scraps of food, to avoid clogging the filters and
consequently reducing the performance.
Do not load very small items which can fall
through the baskets.
Open the door and slide out the baskets to load the
dishes.
The lower basket
The lower basket is designed to take saucepans, lids,
plates, salad bowls, cutlery etc.
Serving dishes and large lids should be arranged
around the edge of the basket, ensuring that the upper
spray arm can turn freely.
The cutlery basket
Long bladed knives stored in an upright
position are a potential hazard.
Long and/or sharp items of cutlery such as
carving knives must be positioned
horizontally in the upper basket.
Take care when loading or unloading sharp
items such as knives.
Cutlery should be placed in the removable cutlery
basket with the handles facing downwards.
If the handles protrude from the bottom of the basket,
obstructing the lower spray arm, load the cutlery with
the handles facing upwards.
Mix spoons with other cutlery to prevent them from
sticking together.
Silver cutlery tends to go black if mixed with steel
cutlery. Place it in the cutlery basket separate from the
others.
Arrange spoons, dessert spoons, knives and other
small items of cutlery in the rack on the side of the
cutlery basket.
CES23en
Using your appliance
UI57
UI12
UI08

9
The upper basket
The upper basket is designed for plates (dessert
plates, saucers, dinner plates of up to 24 cm in
diameter), salad bowls, cups and glasses.
Larger plates (dinner plates up to 24 cm in diameter)
must be loaded in the front part of the upper basket.
Arrange items on and underneath the fold-down cup
rack so that water can reach all surfaces.
Glasses with long stems can be placed upside down
in the raised cup racks.
Light items (plastic bowls etc.) should be loaded in the
upper basket and arranged so they do not move.
Before closing the door, ensure that the
spray arms can rotate freely.
When loading the dishes, ensure that you do
not cover the water inlet funnel in the middle
of the upper basket.
Adjusting the height of the upper
basket
If washing very large plates (over 27 cm and up to 31
cm in diameter) you can load them in the lower basket
after moving the upper basket to the higher position.
To move to the higher position proceed as follows:
1. Move the front runner stops (A) of the upper basket
outward and slide the basket out.
2. Refit the basket in the higher position and replace
the stops (A) in their original position.
When the top basket is in the higher
position it will only take plates up to 20 cm
in diameter and you will not be able to use
the raised cup racks.
After loading your machine always close
the door, as an open door can be a hazard.
CES14en
US20
US16
US16
A
RC01

10
Use of detergent
Only use detergents specifically designed
for use in dishwashers.
We recommend the use of Finish detergents which
are available in the following options:
Finish Double ActionTablets. Each tablet has the
exact amount of detergent required, simply place in
the dispenser.
Finish Powder recommended for every day use.
Finish Liquid Gel ideal for every day use.As the gel
is extra gentle it is recommended for fine both china.
If using powder detergents proceed as follows:
1. Open the dispenser lid by pulling the catch (D).
2. Add the detergent. As all detergents are not the
same, you should also consult the instructions on
the packet.
3. Always close the lid.
4. If the programme has a prewash add a little amount
of detergent over the lid of the dispenser.
If using detergent in tablets proceed as follows:
1. For all programmes; place 1 tablet inside the
detergent dispenser.
2. Always close the lid.
3. For all programmes with prewash; place a portion
of a further tablet on the lid of the detergent
dispenser.
Insufficient quantities of detergent will
produce poor washing results, whereas an
excessive amount of detergent will not
improve washing results and is also
wasteful.
Using no more than the correct amount also
contributes to reducing pollution.
Compact detergents with enzymes
In these low-alkaline compact powders the
environmentally unfriendly components have been
replaced by natural enzymes and other more
biodegradable substances.
These new compact powders are generally
phosphate-free.
As phosphates have water softening properties, we
suggest you add salt to the salt container even if the
hardness of your water is as low as 7°TH.
This will avoid lime deposits on crockery and the inner
tub.
DET05en
D
MIN
MAX
DE17
Min = 15 g
Max = 30 g
DE02

11
To save energy
Place dishes in the machine immediately after every
meal and wait until the dishwasher is full before
washing.
If necessary run the Rinse and Hold programme (see
"Washing Programmes" chart) so that any food scraps
do not become caked on the dishes while you are
waiting to run the complete wash programme.
Do not prewash dishes under running water.
For best washing and drying results
Before loading, remove all scraps of food and soak
very heavily soiled pots and pans.
Arrange saucepans, cups and glasses etc.upside-
down.
Tilt items with convex or concave surfaces so that the
water drains off easily.
Avoid contact between the dishes as far as possible.
Wait a few minutes before removing the dishes;in this
way they will be cooler and the drying will be
improved.
Empty the lower basket first and then the upper one;
this will avoid water dripping from the upper basket
onto the dishes in the lower one.
You will improve drying results by leaving the
dishwasher door ajar for at least 15-30 minutes as
soon as the programme finishes.
Items not suitable for
dishwashers
The following items should not be washed in
the dishwasher (unless they are sold as
dishwasher proof):
- Cutlery with wooden or horn handles or
glued parts
- bronze cutlery
- saucepans with wooden handles
- aluminium ware
- crystal ware
- leaded glass
- plastic items
- antique or fine decorated china
Certain types of decoration can discolour when
washed in a dishwasher.
Crystal-ware and plastic objects, if not guaranteed
dishwasher proof should be washed by hand.
Certain types of glass can also become opaque
after being washed several times in a dishwasher.
A chemical reaction can occur between silver
cutlery and stainless steel cutlery. As a precaution,
do not wash together.
Iron and cast iron objects can rust and stain other
items.
Aluminium tends to go black, copper, pewter and
brass tend to stain.
If in doubt check with manufacturer of
the item.
When buying new dishes, ensure that
they are dishwasher proof.
CON06en
Hints and tips
BRILLIANT
FOR A
SHINE
RINSE
CONCENTRATED DISHWASHER DETERGENT
ACTION
NEW
DOUBLE
LIQUID GEL
POWDER
EASY
POURING
PACK
For best results we recommend the use of Finish detergents, rinse aid and salt.
DE15

12
Programme Degree of soil Starting position
of the
programmer
Required
push buttons Cycle
description
PRO25en
Washing programmes
Main wash up to 65°C
1 cold rinse
1 hot rinse
Cold prewash
Main wash up to 65°C
2 cold rinses
1 hot rinse
Drying
Main wash up to 65°C
2 cold rinses
1 hot rinse
Drying
1 cold rinse, (to avoid food
scraps from sticking
together).
Heavy soil.
Crockery, cutlery, pots
and pans
Normal soil.
Crockery and cutlery
Light soil.
Crockery and cutlery
POWERWASH
65°C
NORMALWASH
65°C
RINSE AND
HOLD
*ECO WASH
65°C
Any.
Partial load (to be
completed later in the
day). 1
2
3
4
On/Off
On/Off
On/Off
On/Off
*This is a special programme for quick washing a full load of lightly soiled dishes, glasses and crockery
(except pots) so that you may re-use them promptly.

13
1. Check the filters
Ensure they are clean and properly positioned
(see "Maintenance and cleaning").
2. Check that there is rinse aid
and salt
3. Load the dishes
Remove any scraps of food.
Pull the lower basket out and arrange the
saucepans, plates and cutlery in it.
Pull the upper basket out and arrange the
plates, saucers, glasses and cups etc. in it.
Slide the baskets back into the machine.
4. Ensure that the spray arms can
rotate freely.
5. Measure out detergent
Add the detergent into the dispenser.Consult
the instructions on the packet.
Close the detergent dispenser lid.
6. Close the dishwasher door
7. Set the programme
Turn the programme selector dial clockwise until
the number of the programme you wish to select
corresponds with the programme marker on the
control panel.
8. Start the programme
Depress the On/Off push button.
The "Mains On" indicator light will come on
and the machine will start.
If you wish to interrupt the washing
programme at any time press this button
again.
9. At the end of the washing
programme
At the end of the programme the
dishwasher will automatically stop.
The "Mains On" indicator light remains on
until the On/Off push button is depressed.
10. Switch off the dishwasher
Switch off the dishwasher by pressing the
On/Off push button and open the door.
When the washing programme has
finished, it is recommended that the
dishwasher is unplugged and the water
tap turned off.
In general it is not advisable to open the
door while the machine is working; if the
door is opened however, a safety device
ensures that the machine stops.
Important!
Care must be taken if the door is opened
during the hot phase or immediately
after a programme has finished, as
steam may escape.
SEQ17en
Operating sequence

14
Internal cleaning
Ensure that the seals around the door, the detergent
and rinse aid dispensers are cleaned regularly with a
damp cloth.
We recommend the use of Finish Dishwasher
Cleaner every 3 months or run a 65°C wash without
dishes using detergent. Regular use of Finish
Dishwasher Cleaner cleans inaccessible parts,
eliminates unpleasant food odours and helps prevent
the build-up of limescale.
Cleaning the central filters
(After each wash)
Inspect the central filters (B) and (C) and remove any
scraps of food with a brush, under running water.
Filters (B) and (C) are both removed by lifting up the
outer one (B) (pulling the central funnel upwards);the
smaller filter (C) can be removed by pressing the two
tongues (D).
Once cleaned, refit the filters by pressing them down
until they click into place.
Cleaning the large filter
(Once a month)
Clean the large filter (A) on both sides under running
water, using a brush.
To take it out, remove the spray arm by pressing the
two tongues (E), turn the ring (F) anticlockwise and
then slide the whole part out. Refit the filter following
the above instructions in reverse order.
The dishwasher must not be used without
filters.
Incorrect repositioning and fitting of the
filters will produce poor washing results.
Cleaning the filters is vital to ensure correct
operation of the machine.
MAN06UKen
Maintenance and cleaning
MA13
B
C
D
MA01
F
A
E
MA08

15
External cleaning
Clean the external surfaces of the machine and
control panel with a damp soft cloth. If necessary use
only neutral detergents.Never use abrasive products,
scouring pads or solvent (acetone, trichloroethylene
etc....).
Prolonged periods of non-operation
If you are not using the machine for any period of
time you are advised to:
1. Unplug the appliance and then turn off the water.
2. Fill the rinse aid dispenser.
3. Leave the door ajar to prevent the formation of
any unpleasant smells.
4. Leave the inside of the machine clean.
Frost precautions
Avoid placing the machine in a location where the
temperature is below 0°C.If this is unavoidable, empty
the machine, close the appliance door, disconnect the
water inlet pipe and empty it.
Moving the machine
If you have to move the machine (moving house
etc....):
1. Unplug it.
2. Turn the water tap off.
3. Remove the water inlet and discharge hoses.
4. Pull the machine out together with the hoses.
Avoid over tilting the machine during transportation.
MAN03en

16
Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without
calling out an engineer.
Before contacting your local Service Force Centre, please carry out the checks listed below.
Important: If you call out an engineer to a fault listed below or to repair a fault caused by incorrect use or
installation a charge will be made even if the appliance is in guarantee.
RIM05UKen
Something not working
Symptom Solution
The machine will not start ●The door has not been properly closed.
●The plug is not properly inserted in the power socket.
●There is a power failure.
The machine does not fill ●Ensure the water tap is open.
with water ●Ensure the mains water supply has not been cut off.
●The inlet hose may be squashed or bent. Reposition the hose.
●The inlet hose may be blocked.Switch off the water supply
and clean the filter.
The filters are blocked ●Clean the filters (refer to "Maintenance and cleaning").
The spray arms are not rotating ●Ensure the crockery is loaded correctly.
The dishwasher will not drain ●The drain hose may be squashed or bent.
Reposition the hose.
●The sink may be blocked.Clear any blockages.
●The drain hose extension is not correct. Follow the
instructions for connecting to the waste.
●There is no vent in the end of the drain hose.
The machine is noisy ●Dishes are rattling against each other, refer to “Loading
your machine”.
●The spray arms are knocking against the dishes.Refer to
"Loading your machine".
The door is difficult to close ●The dishwasher is not level, or not properly built-in.
Visible lime deposits or white ●Check that there is salt and that the salt cap is tight.
film on the dishes ●Check that the right level of the water softener is set.
The dishes are not quite dry ●The rinse aid has run out or too little is being used.
The dishes are not clean ●The baskets are too full.
(poor wash) ●The dishes have not been arranged properly.
●The spray arms do not rotate
●The spray arms are clogged.
●The filters are clogged.
●The filters are not in the correct position.
●Not enough detergent has been used or it is unsuitable.
●The detergent is old or has gone hard.
●The salt container cap is not properly closed.
●The washing programme selected is too gentle.

17
If after all these checks, the problem persists, contact
your local Service Force Centre, quoting the model
and serial number.This information can be found on
the rating plate located on the right hand side of the
dishwasher door (see picture).
Service and spare parts
In the event of your appliance requiring service, or if
you wish to purchase spare parts please contact your
local Tricity Bendix Service Centre by telephoning:
08705 929 929
The addresses of Tricity Bendix Service Force Centres
can be found at the back of this instruction book.
Before calling out an engineer, please ensure you
have read the details under the heading "Something
Not Working" and have the model number and
purchase date to hand.
In-guarantee customers should ensure
that the checks under the heading
"Something NotWorking" have been
made as the engineer will make a charge
if the fault is not a mechanical or
electrical breakdown.
Please note that it will be necessary to
provide proof of purchase for any
in-guarantee service calls.
Customer Care Department
For general enquiries concerning your Tricity Bendix
appliance or for further information on Tricity Bendix
products please contact our Customer Care
Department by letter or telephone as follows:
Customer Care Department
Tricity Bendix
55-77 High Street
Slough
Berkshire
SL1 1DZ
Tel: [phone]
GAR06en
Prod.No. ........ Ser. No. .........
Mod. ........
RA01

18 GAR09en
Standard guarantee conditions
We, Tricity Bendix Limited, undertake that if within 12 months of the date of purchase this Tricity Bendix
appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, we
will, at our option repair or replace the same FREE OF CHARGE for labour, materials or carriage on condition
that:
●The appliance has been correctly installed and used only on the electricity supply stated on the rating plate.
●The appliance has been used for normal domestic purposes only, and in accordance with the manufacturer’s
instructions.
●The appliance has not been serviced, maintained repaired, taken apart or tampered with by any person not
authorised by us.
●All service work under this guarantee must be undertaken by a Tricity Bendix Service Force Centre.
●Any appliance or defective part replaced shall become the Company’s property.
●This guarantee is in addition to your statutory and other legal rights.
Home visits are made between 8.30am and 5.30pm Monday to Friday.Visits may be available outside these
hours in which case a premium will be charged.
Exclusions
This guarantee does not cover:
●Damage or calls resulting from transportation, improper use or neglect, the replacement of any light bulbs or
removable parts of glass or plastic.
●Costs incurred for calls to put right an appliance which is improperly installed or calls to appliances outside
the United Kingdom.
●Appliances found to be in use within a commercial environment, plus those which are subject to rental
agreements.
●Products of Tricity Bendix manufacture which are not marketed byTricity Bendix Limited.
European Guarantee
If you should move to another country within Europe then your guarantee moves with you to your new home
subject to the following qualifications:
●The guarantee starts from the date you first purchased your product.
●The guarantee is for the same period and to the same extent for labour and parts as exists in the new
country of use for this brand or range of products.
●This guarantee relates to you and cannot be transferred to another user.
●Your new home is within the European Community (EC) or European freeTrade Area.
●The product is installed and used in accordance with our instructions and is only used domestically, i.e.a
normal household.
●The product is installed taking into account regulations in your new country.
Before you move please contact your nearest Customer Care centre, listed below, to give them details of your
new home.They will then ensure that the local service Organisation is aware of your move and able to look
after you and your appliances.
France Senlis [phone]
Germany Nurnberg [phone]
Italy Pordenone [phone]
Sweden Stockholm [phone]
UK Slough [phone]
Guarantee conditions

19
Hints for test centres
Before starting any test it is necessary to fill completely with salt the salt container and with rinse aid the rinse
aid dispenser.
IST23en
Test standard EN 50242
Reference programme: Power Wash 65°C with prewash
Load: 8 standard place settings
Rinse aid selector: position 4
Detergent dosage : 20 g in the dispenser
5 g on the dispenser lid
US56 UI57
Arrangement
upper basket Arrangement
lower basket
DIMENSIONS Width 45 cm
Height with worktop 85 cm
Height without worktop 82 cm
Max depth 60 cm
Max depth with open door 115.9 cm
ELECTRICAL CONNECTION Voltage 220/240V - 50 Hz
MOTOR RATING DURING WASH 200 W
POWER OF HEATING ELEMENT 2570 W
OVERALL POWER 2770 W
WATER SUPPLY PRESSURE Minimum 50 kPa (0.5 bar)
Maximum 800 kPa (8 bar)
CAPACITY 8 place settings
Technical specifications

20
Any electrical work required to install this
appliance should be carried out by a
qualified electrician or competent person.
Any plumbing work required to install this
appliance should be carried out by a
qualified plumber or competent person.
Remove all packaging before positioning the
machine.
If possible, position the machine next to a water tap
and a drain.
Water supply connections
This dishwasher must be plumbed into a cold water
supply.
The water pressure must be within the limits given in
the technical specifications.
Your local Water Authority will advise you on the
average mains pressure in your area.
The dishwasher features fill and drain hoses which
can be turned either to the left or the right to suit the
installation.
The locknut must be correctly fitted to avoid water
leaks.
Avoid bends or kinks in the hose which could prevent
or slow down the water supply.
If the machine is connected to new pipes or pipes
which have not been used for a long time, you should
run the water for a few minutes before connecting the
inlet hose.This will prevent deposits of sand or rust
clogging the inlet hose filter.
COL08en
Installation instructions