Trigon Sports ProCage Black Series User manual

BSL77P
ProCageTM “Black Series” 7’x7’ L-Screen
ASSEMBLY INSTRUCTIONS
BOX CONTENTS
Description Quantity
• #1 piece with two reduced ends 6 each
• #2 piece with two reduced ends 1 each
• #3 piece small “T” fitting with open ends 1 each
• #4 piece bottom “T” with open ends 1 each
• #5 piece top “U” piece with open ends 1 each
• #6 piece elbow piece with one reduced end 1 each
• #7 piece small “+” fitting open ends 1 each
• #8 piece with two reduced ends 1 each
• 4-Way bottom leg pieces 2 each
• Pillowcase-style net with lacing cord 1 each
888-313-1303
www.trigonsports.com
Note: Nets and frame should be inspected prior to each use. DO NOT use protective screen
if holes are present in the netting. Repair or replace net before use. This screen IS NOT de-
signed for short toss or close hitting drills. For use of this protective screen in batting cage
setting we recommend adding Item # B77PAD kit designed for this frame.
Please call 888-313-1303 to order or visit us on the web www.trigonsports.com.
6
1 1
1 11
12
3
7
5
4
8

888-313-1303
www.trigonsports.com
STEP 1
Using diagram shown start with bottom pieces and
attach using push button assembly.
NOTE: Be sure 4-way bottom legs form a ‘V’ off the
ground.
Attach (3) upright pieces Part #1 as shown.
STEP 2
1 14
1 11
STEP 3
Attach Part #6, Part #7, Part #8 and Part #3 per
diagram.
Add Part #2 and Part #1 per diagram.
NOTE: Be sure part #2 is only used in position
above part #7 “+”fitting.
STEP 4
6 37 12
STEP 5
Add top ‘U’ piece #5
NOTE: Be sure all push buttons on frame are seated
properly.
Add net by sliding over top frame. Net should fit
like a “pillow case”. Use lacing twine provided to se-
cure net opening to bottom rail.
5
ASSEMBLED SCREEN
8