Trinity ONE Maintenance manual

ONE
User Care & Maintenance Guide.
All manuals and user guides at all-guides.com
all-guides.com

TRINITY
Mark Folker
Founder & Director
I’m pleased to introduce you to the world’s first
all-in-one manual brewing appliance for specialty coffee.
I can’t thank you enough for your support,
and for sharing in the journey from prototype to product.
The years of effort in developing the Trinity ONE
concept are over. It’s time to start brewing.
TrinityTM ONE Specialty Coffee Brewing Appliance is a product and trademark owned by Trinity Coffee Company Pty Ltd.
All rights reserved. Please search and follow us on social media. Questions? Contact us at [e-mail].
www.trinitycoffee.co
All manuals and user guides at all-guides.com

ONE
Brew Chamber
High Clarity
Double Walled for
Press, Drip & Immersion
Flow Controller
304 Stainless Steel
Fine Bead Blasted
Textured Matte Finish
Brew Stand
304 Stainless Steel
Fine Bead Blasted
Smooth Matte Finish
Base Plate
American Black Walnut
Heartwood Timber
Press Cylinder
304 Stainless Steel
Weighted 225 Edition
Top Plate
American Black Walnut
Heartwood Timber
Filter Housing
for Paper and Metal
Disk Filters
Group Handle
304 Stainless Steel
American Black Walnut
Heartwood Timber
Made for Specialty Coffee.
All manuals and user guides at all-guides.com

Please Read Carefully.
For Your Safety.
1. Please take care at all times when brewing with the Trinity ONE and use only as intended.
2. The Press Cylinder is heavy, be careful not to drop or misuse as it could cause injury.
3. While brewing, beware of boiling water. This includes heated components of the Trinity ONE.
4. Beware of potential hot surfaces on the Flow Controller and Filter Housing at all times.
5. ALWAYS secure the Filter Housing by holding the handle before turning the Flow Controller.
6. ALWAYS use your hand to guide Press Cylinder to rest, even when unlocking FIlter Housing (refer below).
7. NEVER drop Press Cylinder into Brew Chamber, even when the Press Cap is connected.
!!Hot Surfaces!!
!!Heavy!!
!!Important!!
Use left hand to guide
Press Cylinder to rest
when unlocking
Filter Housing
!!Unlocking Instructions!!
(1) Secure Press Cylinder with left hand
(2) Unlock Filter Housing with right hand
Trinity ONE will take some time to practice and use properly!
All manuals and user guides at all-guides.com

Press Cylinder.
User Care & Maintenance.
1. Clean smudges on Press Cylinder and Badge with a wet microfibre cloth, then quickly dry.
2. Ensure Timber Press Top is regularly dried to ensure longevity.
3. Stow Press Cylinder in Brew Chamber when not in use, or position upside down on bench.
4. Always stow securely in Brew Chamber and avoid opportunities for Press Cylinder to roll on flat surface.
5. As noted in safety instructions, avoid dropping and do not misuse Press Cylinder.
Timber Press Top
American Black Walnut
Heartwood Timber
Press Badge
Machine Punched Logo
304 Stainless Steel
Press Tip
Connect to Press Cap for creating
air-tight pressure seal against
Brew Chamber wall
All manuals and user guides at all-guides.com

Filter Housing & Flow Controller.
User Care & Maintenance.
1. Clean smudges on Stainless Steel surfaces with a wet microfibre cloth, then quickly dry.
2. Ensure Timber Filter Housing Handle is regularly dried to ensure longevity.
3. The hub screw can be tightened using a 2.5mm hex key (not included) (refer Inset A).
4. Filters to be provided separately - recommended paper filter disks are those used for AeroPress.
Filter Housing Handle
American Black Walnut
Heartwood Timber
Filter Housing
Glass Filled Nylon
(BPA-Free)
Housing Badge
304 Stainless Steel
Hub Screw
Tighten with 2.5mm
Hex Key (Not Included)
Inset A
Flow Controller
Turn Left to close
Turn Right to open
All manuals and user guides at all-guides.com
all-guides.com

User Care & Maintenance.
1. Clean smudges on Stainless Steel surfaces with a wet microfibre cloth, then quickly dry.
2. Ensure Timber plates are regularly dried to ensure longevity.
3. Maintain air gap above coffee during press to prevent brew chamber scratches.
Only the supplied silicone Y-Seal on Press Cap should touch the brew chamber wall.
4. DO NOT immerse the Brew Chamber or Stand in water.
5. Use only a soft sponge or non-abrasive microfibre cloth for cleaning Brew Chamber and Stand.
6. Be mindful of spills around top edge of conical opening of Brew Chamber. Avoid spills onto timber.
Brew Chamber and Stand.
Top Plate
American Black Walnut
Heartwood Timber
Bottom Plate
American Black Walnut
Heartwood Timber
Brew Stand
304 Stainless Steel
Fine Bead Blasted
Smooth Matte Finish
Brew Chamber
Eastman Tritan
Durable Copolyester
(BPA-Free)
All manuals and user guides at all-guides.com

Stabilising Edge
Used during Press Method
User Care & Maintenance.
1. Maintain air gap between Y-Seal and brewed coffee at all times to prevent clogging of Y-Seal
and scratching the Brew Chamber wall.
2. After pressing through Brew Chamber using the Press Cylinder, Press Cap Y-Seal will be protruded
below Brew Chamber. To remove, gently lift Press Cylinder and Press Cap will fall into Filter Housing.
3. Use only a soft sponge or non-abrasive microfibre cloth for cleaning Press Cap.
4. Dosing Tool can be internally marked to indicate preference for dosing desired weight of coffee.
Press Cap & Dosing Tool.
Y-Seal
Food grade silicone
Dosing Tool Function
22g whole coffee bean capacity
Press Cap
Eastman Tritan
Durable Copolyester
(BPA-Free)
All manuals and user guides at all-guides.com

User Care & Maintenance.
Questions?
Contact us at [e-mail] if you have any further questions regarding user care & maintenance.
All manuals and user guides at all-guides.com