Tripp Lite DMCS60100XX User manual

1
Owner’s Manual
Heavy-Duty Mobile
Flat-Panel Floor Stand
Model: DMCS60100XX
CAUTION: DO NOT EXCEED MAXIMUM LISTED WEIGHT CAPACITY. SERIOUS INJURY OR
PROPERTY DAMAGE MAY OCCUR!
1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support
Copyright © 2021 Tripp Lite. All rights reserved.
200 x 200 / 300 x 300 /
400 x 200 / 400 x 400 /
600 x 400 / 800 x 400 /
800 x 600 / 1000 x 600
100”
MAX
TV
TV
220 lb.
220 lb.
(100 kg)
(100 kg)
MAX
MAX
CAMERA
CAMERA
11 lb.
11 lb.
(5 kg)
(5 kg)
MAX
MAX
DVD
DVD
11 lb.
11 lb.
(5 kg)
(5 kg)
MAX
MAX
Este manual está disponible en español en la página de Tripp Lite: tripplite.com
Ce manuel est disponible en français sur le site Web de Tripp Lite : tripplite.com
Русскоязычная версия настоящего руководства представлена на веб-сайте компании
Tripp Lite по адресу: tripplite.com
Dieses Handbuch ist in deutscher Sprache auf der Tripp Lite-Website verfügbar: tripplite.com
WARRANTY REGISTRATION
Register your product today and be
automatically entered to win an ISOBAR®
surge protector in our monthly drawing!
tripplite.com/warranty

2
NOTE: Read the entire instruction manual before you start assembly and installation.
WARNING
• Do not begin the installation until you have read and understood the instructions
and warnings contained in this manual. If you have any questions regarding any
of the instructions or warnings, please visit tripplite.com/support.
• This mounting bracket was designed to be installed and utilized ONLY as
specified in this manual. Improper installation of this product may cause damage
or serious injury.
• This product should only be installed by someone of good mechanical ability,
with basic building experience and a full understanding of this instruction
manual.
• Make sure that the mounting surface can safely support the combined load of
the equipment and all attached hardware and components.
• Always use an assistant or mechanical lifting equipment to safely lift and position
equipment.
• Tighten screws firmly, but do not over-tighten. Over-tightening screws can
damage the items, greatly reducing their holding power.
• This product is intended for indoor use only. Using this product outdoors could
lead to product failure and personal injury.
Warranty & Product Registration
5-Year Limited Warranty
Seller warrants this product, if used in accordance with all applicable instructions, to be free from original defects
in material and workmanship for a period of 5 years from the date of initial purchase. If the product should
prove defective in material or workmanship within that period, Seller will repair or replace the product, in its sole
discretion.
THIS WARRANTY DOES NOT APPLY TO NORMAL WEAR OR TO DAMAGE RESULTING FROM ACCIDENT, MISUSE,
ABUSE OR NEGLECT. SELLER MAKES NO EXPRESS WARRANTIES OTHER THAN THE WARRANTY EXPRESSLY
SET FORTH HEREIN. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ALL IMPLIED WARRANTIES,
INCLUDING ALL WARRANTIES OF MERCHANTABILITY OR FITNESS, ARE LIMITED IN DURATION TO THE WARRANTY
PERIOD SET FORTH ABOVE; AND THIS WARRANTY EXPRESSLY EXCLUDES ALL INCIDENTAL AND CONSEQUENTIAL
DAMAGES. (Some states do not allow limitations on how long an implied warranty lasts, and some states do not
allow the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions
may not apply to you. This warranty gives you specific legal rights, and you may have other rights which vary from
jurisdiction to jurisdiction).
WARNING: The individual user should take care to determine prior to use whether this device is suitable, adequate
or safe for the use intended. Since individual applications are subject to great variation, the manufacturer makes
no representation or warranty as to the suitability or fitness of these devices for any specific application.
PRODUCT REGISTRATION
Visit tripplite.com/warranty today to register your new Tripp Lite product. You’ll be automatically entered into a
drawing for a chance to win a FREE Tripp Lite product!*
* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.
Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice. Photos and
illustrations may differ slightly from actual products.

3
Component Checklist
IMPORTANT: Ensure that you have received all parts according to the component checklist prior to
installing. If any parts are missing or faulty, visit www.tripplite.com/support for service.
Middle Base (x1)
M5 x 14 (x4) M8 x 50 (x4)
Left Column (x1)
Right Adapter Bracket (x1)
Camera Shelf (x1)
Plastic Handle (x2)
Right Column (x1)
Top Cover (x2)
Support Bar (x1)
DVD Shelf (x1)
Knob (x2) Caster (x4)
Left Adapter Bracket (x1)
Connecting Plate (x1)
M6x25 Philips Rounded Head (x2)
M6x25 Hex Rounded Head (x2)
M6x20 (x4)
Hex Key (x1)
M4x6 (x3)
Wrench (x1)
M4x6 (x2) M6x25 Hex Socket Head (x2)
M6x14 (x6) M8x25 (x8)
Left Leg (x1) Right Leg (x1)
M6 x 14 x4)
Washer (x4) Small Spacer (x8)
M6 x 30 (x4)
Big Spacer (x8)
M8 x 30 (x4)
Left Cover (x1) Right Cover (x1)
Universal Plate (x1)
Package M
Package P

4
1. Assemble the Base
2. Adjust Column Height
• Insert the right leg into the base. Align the holes in the right leg to the
holes in the base. Secure with the screws. Repeat this step for the left
leg.
• Each caster can be adjusted independently for fine tuning.
Slightly turn the nut to lower or raise the base.
Repeat this step for the left column.
Note: Make sure both columns are at the same height using the height indicator as guide.
Adjust to the desired height,
then tighten all screws.
CAUTION: Hold the inner column
when loosening the screws to
adjust height.
Never Overtighten
Screws
Middle Base
Left Leg
M6x16
Hex Key
Right Leg
Wrench
Caster
Hex Key
Hex Key
Right Column

5
3. Attach Columns to Base
During this step, the columns are not
secured to the base with screws.
Be careful not to knock the columns over.
Right Column
Left Column
Plastic Handle

6
4. Attach Universal Plate to Columns
5. Secure Columns to Base
M6x14
Top Cover
Universal
Plate
Universal
Plate
Support
Insert the Universal Plate’s Supports into the column along
the column rails. Tighten all screws with a suitable Philips
screwdriver.
Using the Hex Key, tighten the
screws to secure the columns
to the base.
Left Cover
Right
Cover
M8x25 Hex Key

7
5. Secure Columns to Base
6. Assemble the DVD Shelf
M6x25 Philips
Rounded Head
Tighten the safety screws.
Knob
Support Bar
M6x14
M6x25 Hex Rounded Head

8
7. Attach DVD Shelf to Columns
8. Attach Adapter Brackets to Display
Use the Hex Key and screws to secure the DVD
Shelf Assembly to the Columns’ Support Blocks.
Adjust the Columns to the desired height before
installing the display.
Hex Key
8.1 For Flat-Back Screens
Hex Key
Hex
Key
Support Block
M6x25 Hex
Socket Head
M5x14
M6x14
Washer
TV
TV
TV

9
8. Attach Adapter Brackets to Display
9. Hang the Display onto the Universal Plate
8.2 For Recessed-Back Screens or Access to A/V Inputs
• Choose the appropriate screws, washers and
spacers (if necessary) according to the type of
screen.
• Position the adapter brackets as close as possible
to the center of the display.
• Screw the adapter brackets onto the display.
• Hook the adapter brackets (attached to the display)
onto the universal plate.
• Rotate the bottom screws counterclockwise to lock.
• Rotate the bottom screws clockwise to unlock.
• Use a padlock (not included) to prevent display
from being stolen.
Do not over-tighten
screws.
M6x30
M8x30
M6x30
M8x30
M6x30
M8x30
M8x50 M8x50
M8x50
Washer Washer Washer Washer
Washer
Washer
Small
Spacer
Small
Spacer
Small
Spacer
Small
Spacer
Big
Spacer Big
Spacer
Big
Spacer
Big
Spacer
Big
Spacer
or or or
or
or
Make sure the display
is correctly mounted
before releasing the
display.

10
C
10. Cable Management
11. Assemble the Camera Shelf
Route the power and connection cables
through the openings on the Left and
Right Columns.
Use a Philips screwdriver and screws
to attach the Camera Shelf to the
Connecting Plate.
Camera
Shelf
Connecting
Plate
M4x6
M4x6

11
12. Attach the Camera Shelf Assembly to the Universal Plate
Remove the Universal Plate’s two rear screws, then attach the Camera Shelf Assembly using the same screws
just removed. Adjust the Camera Shelf Assembly to the desired height, then secure by tightening the screws
with a Philips screwdriver.
Remove Screws
Insert Removed Screws to attach Connecting Plate

12
1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support
21-06-081 93-380E_RevB
Maintenance
• Check that the bracket is secure and safe to use at regular intervals (at least every three months).
• For any additional questions, visit tripplite.com/support.
+5°
–10°
13. Adjustment
Support Block
TV panel center
height measured
from floor.
1200 mm
1250 mm
1300 mm
1350 mm
1400 mm
1450 mm
1500 mm
1550 mm
1600 mm
1650 mm
Hex Key
Use the Hex Key to
loosen the screws on
both support blocks.
Adjust the DVD shelf
to the desired height,
then tighten screws to
secure.