Tripp Lite DMR1024X2 User manual

1
Owner’s Manual
Dual/Triple Flat Panel Rail
Wall Mount
Models: DMR1024X2 (Dual), DMR1015X3 (Triple)
CAUTION: DO NOT EXCEED MAXIMUM LISTED WEIGHT CAPACITY. SERIOUS INJURY OR
PROPERTY DAMAGE MAY OCCUR!
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
Copyright © 2016 Tripp Lite. All rights reserved.
75x75/100x100 24”
MAX 15” MAX 8kg
(17.6lbs)
MAX
Este manual esta disponible en español en la página de Tripp Lite: www.tripplite.com
Ce manuel est disponible en français sur le site Web de Tripp Lite : www.tripplite.com
Русскоязычная версия настоящего руководства представлена на веб-сайте компании
Tripp Lite по адресу: www.tripplite.com
Dieses Handbuch ist in deutscher Sprache auf der Tripp Lite-Website verfügbar: www.tripplite.com
DMR1024X2 DMR1015X3
PROTECT YOUR INVESTMENT!
Register your product for quicker service and ultimate peace of mind.
You could also win an ISOBAR6ULTRA surge protector—a $100 value!
www.tripplite.com/warranty
16-11-186-933676-EN.indd 1 12/5/2016 11:06:50 AM

2
NOTE: Read the entire instruction manual before you start installation and assembly.
Warranty & Product Registration
WARNING
• Do not begin the installation until you have read and understood the instructions
and warnings contained in this manual. If you have any question regarding any of
the instructions or warnings, please visit www.tripplite.com/support.
• This mounting bracket was designed to be installed and utilized ONLY as
specified in this manual. Improper installation of this product may cause damage
or serious injury.
• This product should only be installed by someone of good mechanical ability, with
basic building experience and a full understanding of this manual.
• Make sure that the supporting surface will safely support the combined load of
the equipment and all attached hardware and components.
• If mounting to wood wall studs, make sure that mounting screws are anchored
into the center of the studs. The use of a stud finder is highly recommended.
• Always use an assistant or mechanical lifting equipment to safely lift and position
equipment.
• Tighten screws firmly, but do not over tighten. Over tightening can damage the
items, greatly reducing their holding power.
• This product is intended for indoor use only. Using this product outdoors could
lead to product failure and personal injury.
5-Year Limited Warranty
Seller warrants this product, if used in accordance with all applicable instructions, to be free from original defects
in material and workmanship for a period of 5 years from the date of initial purchase. If the product should
prove defective in material or workmanship within that period, Seller will repair or replace the product, in its sole
discretion.
THIS WARRANTY DOES NOT APPLY TO NORMAL WEAR OR TO DAMAGE RESULTING FROM ACCIDENT, MISUSE,
ABUSE OR NEGLECT. SELLER MAKES NO EXPRESS WARRANTIES OTHER THAN THE WARRANTY EXPRESSLY
SET FORTH HEREIN. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ALL IMPLIED WARRANTIES,
INCLUDING ALL WARRANTIES OF MERCHANTABILITY OR FITNESS, ARE LIMITED IN DURATION TO THE WARRANTY
PERIOD SET FORTH ABOVE; AND THIS WARRANTY EXPRESSLY EXCLUDES ALL INCIDENTAL AND CONSEQUENTIAL
DAMAGES. (Some states do not allow limitations on how long an implied warranty lasts, and some states do not
allow the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions
may not apply to you. This warranty gives you specific legal rights, and you may have other rights which vary from
jurisdiction to jurisdiction).
WARNING: The individual user should take care to determine prior to use whether this device is suitable, adequate
or safe for the use intended. Since individual applications are subject to great variation, the manufacturer makes
no representation or warranty as to the suitability or fitness of these devices for any specific application.
PRODUCT REGISTRATION
Visit www.tripplite.com/warranty today to register your new Tripp Lite product. You’ll be automatically entered into a
drawing for a chance to win a FREE Tripp Lite product!*
* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.
Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice.
16-11-186-933676-EN.indd 2 12/5/2016 11:06:50 AM

3
Component Checklist
IMPORTANT: Ensure that you have received all parts according to the component checklist prior to
installing. If any parts are missing or faulty, visit www.tripplite.com/support for service.
Wall Plate
Both Models (x1)
VESA Plate
DMR1024X2 (x2)
DMR1015X3 (x3)
M4x12
DMR1024X2 (x8)
DMR1015X3 (x12)
Anchor Bolt
Both Models (x5)
M4x30
DMR1024X2 (x8)
DMR1015X3 (x12)
Concrete Anchor
Both Models (x5)
Spacer
DMR1024X2 (x8)
DMR1015X3 (x12)
Washer
Both Models (x5)
Cable Guide
DMR1024X2 (x3)
DMR1015X3 (x4)
Package M
Package W
16-11-186-933676-EN.indd 3 12/5/2016 11:06:51 AM

4
1a. Wood Stud Wall Mounting
Washer
Anchor Bolt
12
3
Find and mark the exact
location of mounting holes.
Screw the wall
plate onto the
wall.
Drill pilot holes.
WARNING
• Make sure that mounting screws are anchored into the center of the studs.
Use of a stud finder is highly recommended.
• Installers are responsible to provide hardware for other types of mounting situations.
• Installers must verify that the supporting surface will safely support the combined
load of the equipment and all attached hardware and components.
30mm
(1.2”)
ø 3mm
(ø 0.12”)
16-11-186-933676-EN.indd 4 12/5/2016 11:06:52 AM

5
1b. Solid Brick and Concrete Mounting
Mark the
exact location of
mounting holes.
Screw the wall
plate onto the
wall.
Drill pilot holes.
WARNING
• When installing wall mounts on cinder block, verify the actual concrete thickness
is at least 1-3/8” (35mm) for using the concrete anchors. Do not drill into mortar
joints! Be sure to mount in a solid part of the block, generally 1” (25mm) minimum
from the side of the block. It is suggested an electric drill on a slow setting be used
to drill the hole instead of a hammer drill to avoid breaking out the back of the hole
when entering a void or cavity.
• Installers must verify that the supporting surface will safely support the combined
load of the equipment and all attached hardware and components.
1
2
Concrete Anchor
Washer
Anchor Bolt
60mm
(2.4”)
ø 10mm
(ø 0.39”)
16-11-186-933676-EN.indd 5 12/5/2016 11:06:52 AM

6
Note: Choose appropriate screws, washers and spacers (if necessary) according to the type of screen.
• Screw the VESA plates onto the display.
Tighten all screws but do not over tighten.
2. Attaching VESA Plates to Screens
2a. Attaching VESA Plates to Flat Back Screens
2b. Attaching VESA Plates to Recessed Back Screens
M4x12
M4x30
M4x30
Spacer
TV TV TV
TV
16-11-186-933676-EN.indd 6 12/5/2016 11:06:52 AM

7
3. Hang Display onto the Wall Plate
Move the display
horizontally to the
desired position and
lock it using the
knob located on the
bottom of the plate.
Tighten
Locking Knob Head
Cable Guide
16-11-186-933676-EN.indd 7 12/5/2016 11:06:54 AM

8
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
16-11-186 93-3676_RevA
4. Cable Management / Adjustment
Maintenance
• Check that the VESA plates are secure and safe to use at regular intervals (at least every three months).
• Please visit www.tripplite.com/support if you have any questions.
Turn the top knob for fine height adjustment.
16-11-186-933676-EN.indd 8 12/5/2016 11:06:55 AM