Tripp Lite SmartRack SRDUCTN7009 User manual

1
Assembly Instructions
SmartRack®Wide-Rack
Air Inlet Duct Kit for Nexus 7 Series
Switches
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
Copyright © 2017 Tripp Lite. All Rights Reserved. All trademarks are the property of their respective owners.
PROTECT YOUR INVESTMENT!
Register your product for quicker service and ultimate peace of mind.
You could also win an ISOBAR6ULTRA surge protector—a $100 value!
www.tripplite.com/warranty
Model: SRDUCTN7009
Pg. 2-3
Model: SRDUCTN7004
Pg. 3-4
All manuals and user guides at all-guides.com
all-guides.com

2
Parts List – SRDUCTN7009
Assembly – SRDUCTN7009
Exhaust Box
2Attach the Exhaust Box to the Left Rail.
1Use two (2) M4 screws to secure the
Rear Plate to the Inlet Box and one (1)
M4 screw to secure the other Rear Plate
to the Exhaust Box.
3Attach the Inlet Box to the Right Rail.
Inlet Box Top Tray Bottom Tray
M6 x 16 Screw (x16) M4 Screw (x7)
M6 Cup Washer (x16) Rear Plate (x2)
All manuals and user guides at all-guides.com

3
Assembly – SRDUCTN7009
4Attach the Bottom Tray to the rail assemblies.
5On the back of the unit, use four (4) M4 screws to secure
the Bottom Tray to the Inlet Box and Exhaust Box.
6Attach the Top Tray to the rail assemblies.
Parts List – SRDUCTN7004
Inlet Box Top Tray M6 x 16 Screw (x8) M4 Screw (x4) M6 Cup Washer (x8) Rear Plate
All manuals and user guides at all-guides.com

4
Assembly – SRDUCTN7004
1Attach the Inlet Box to the Right Rail.
2Attach the Top Tray to
the rail assemblies.
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
17-05-254 93-35FF_RevC
3On the back of the unit, use four (4) M4 screws
to secure the Top Tray to the Inlet Box.
All manuals and user guides at all-guides.com