TrippNT 51032 User manual

Compact Drawer Cart (51032)
Cart BodyA. Top Drawer
x1
x1
Caster w/ Brake
x2
C.
Propel Nut
x4
E. Lock Washer
x4
F.
x1
These components
are located in the
bottom drawer.
White Plastic Spacer
x4
B.
Thank you for choosing TrippNT for your storage and organiza-
tion needs. Please check to make sure you received your cart in
good shape and all the necessary components are included. This
guide will show you step by step how to assemble your
Compact Drawer Cart (51032).
Assembly Guide (v..3.0)
Included Components
If you need any assistance please call TrippNT at 1.800.874.7768 or email us at
[e-mail]. Also check out the video assembly guide
online at http://TrippNT.com/AssemblyAssistance
Set of 2 keys
x1
D.

Compact Drawer Cart (51032)
12
A
A
H
Locate the keys (D) taped to the
top of the cart.
Using the keys (D) unlock the
drawers. Open the bottom
drawer.
Unpacking the Cart
Unpack components and inspect
with the included component
list to insure all items have been
included.
3
Next press the black tab down
on one side of the drawer slide
and up on the opposite side and
slide the bottom drawer
completely out. Slide the drawer
slides back into the cart
A
4

Installing the Casters
Front of Cart (A)
Bottom of Cart (A)
Compact Drawer Cart (51032)
Once the drawer is removed gently lay cart body (A) on its back
with the drawers facing up towards the ceiling.
5
Caster (C)
White Plastic
Sapcer (B)
B
A
F
E
IMPORTANT CASTER INSTALLATION INSTRUCTIONS
Casters must be assembled correctly. The caster will stay on
tight if installed correctly.
C
Lock Washer - Should be between the
propel nut and the bottom of the cart.
Bottom of Cart
White Plastic Spacer - The grove in the
caster cover should fit snuggly to the hex
shape on the stem of the caster.
Caster
Propel Nut - Hand tighten propel nut
to the stem of the caster with shown
components in between. Nut should
be completely flush with surface
when adequately tightened. This does
require significant torque.
Lock the brake of
the caster so that the
wheel does not move
and the top of the
caster does not swivel.
Securely tighten the
caster in a clockwise
direction until the
caster is snug.
First disassemble each caster assembly.

Care Instructions for your Cart
This product can be cleaned with a solution of water or with a mild organic
solvent . Use of strong solvents is not recommended.
Accessories and Replacement Parts
A variety of accessories and replacement parts are available at:
TrippNT.com/CartAccessories or from your normal TrippNT Distributor
Congratulations, your Compact Drawer Cart is now complete and ready for
your use. Thank you again for selecting TrippNT and please enjoy your cart.
Compact Drawer Cart (51032)
Reassembling the Cart
6
Return cart to upright position.
Lock the brake on the front
casters to prevent movement
while assembling.
7
Align the tracks of the removed
drawer with the tracks on the
inside of the cart body. Press
the top drawer completely
into the cart. It will snap it into
place. There might be a little
resistance before the drawer
snaps into the tracks
A