Triton SQ Series User manual

SQ SERIES FULL RANGE SPEAKERS
SQ4022, SQ5022, SQ6022, SQ6822, SQ6922

2
Congratulaons and thank you for purchasing Triton mobile loudspeakers. With a focus on quality, innovaon, and value,
Triton loudspeakers feature a no-compromise design built for today’s music. Our focus is to provide you an accurate,
powerful listening experience by combining premium components into an elegant-but-accurate design that will deliver a
listening experience you would expect from a quality product.
To make sure your new loudspeakers perform their best, we strongly recommend you have your new Triton loudspeakers
professionally installed.
Please use your new Triton loudspeakers responsibly. Listening to very loud music for extended periods of me can cause
permanent hearing loss.
Triton Full Range Loudspeaker Features:
• Polypropylene woofer cones – oer exceponal balance of strength to weight rao which handles the lowest
lows and fast transions – a great combinaon of strength, durability and stability during high power operaon.
• Butyl Rubber Surrounds – provide superior damping characteriscs and will last longer than foam surrounds.
• Silk Dome Tweeters and mid-ranges - provide smooth and accurate response beyond 20 kHz for
crystal clear high frequency reproducon. Silk domes tweeter oer wider high frequency dispersion.
An integral phase plug ensures even sound dispersion throughout the listening area.
I. Package Contents
• 1 Pair of full range loudspeakers
• 22 # AWG speaker wire
• Mounng hardware (screws and screw clips)
• Instrucon manual and cut-out template
• For SQ4022, there is two universal plasc adapter plate for 4”x 6” included:
• For SQ6022, there is two 6-1/2” universal adopter rings (includes GM/Chrysler 6-3/4G size)

II. Installaon
1. Choose a mounting location for your Triton loudspeakers; the factory location is generally the best choice. Check
for clearance behind the speaker mounting locations, making sure the speakers will not interfere with any handles,
window cranks, door locks, or brackets. If the speakers are to be mounted in the vehicle doors, check the operation of
all functions (windows, locks, and any other switches or hand cranks) to make sure there is no obstruction. Be sure
the mounting location and the drilling of screw holes for mounting will not present a hazard to any wires, control ca-
bles, fuel lines, fuel tanks, hydraulic lines, or other vehicle systems or components. For rear deck installations, make
sure the speakers will not interfere with opening and closing the trunk.
2. If you are replacing the original factory speakers with speakers that are exactly the same size, you may not need to cut
or drill any new holes or run any addional wires. Simply connect the speakers, observing correct polarity, and mount
the speakers in the factory locaon, using the original mounng cutouts, screw holes and hardware. You probably will
not need the grilles and mounng rings for replacement installaons.
3. If installing speakers into a non-factory locaon, use the supplied template as a guide to cut the proper diameter
mounng hole. Use the template or mounng ring to mark the locaons for the mounng screws and drill the holes
with a 1/8” diameter bit. Run speaker wire from your source (radio or amplier) to the mounng locaon.
4. Feed the speaker wires through the openings and mounng rings, and connect them
to the speaker terminals. Make sure you maintain the correct polarity. If you need to
run new wiring, the supplied speaker wire is marked to help you maintain correct
polarity when making connecons. The terminals at one end of the speaker wire are
coded by size to match the speaker terminals. Simply slide the connectors onto the
matching terminals.
5. Fit the mounng rings and speakers to the cutouts, and mount with the supplied screws and clips. Apply a small
amount of the grille adhesive at four or more points around the edges of the grilles and carefully, but rmly, press
the grilles into place.
Fig. 1-
Door installaon
Fig. 1-
Door installaon
3

SPECIFICATIONS
Model
Size (Inches)
Size (mm)
TYPE
Impedance
Frequency
Response
Sensivity
RMS Power
Max Power
Cone
Surround
Tweeter
Frame
Mounng Depth
SQ4022
4”
103 (mm)
2-Way
4 Ω
90Hz-20kHz
86dB
35 Was
70 Was
PP Gunmetal
Butyl
3/4” silk dome
Steel
1.77”/ 45mm
SQ5022
5.25”
133 (mm)
2-Way
4 Ω
60Hz-20kHz
87dB
40 Was
80 Was
PP Gunmetal
Butyl
3/4” swivel
silk dome
Steel
2.09”/ 53mm
SQ6022
6.5”
165 (mm)
2-Way
4 Ω
55Hz-20kHz
89dB
50 Was
100 Was
PP Gunmetal
Butyl
1” swivel
silk dome
Steel
2.59”/ 66mm
SQ6822
5” x 7” & 6” x 8”
127 x 178mm &
152 x 203mm
2-Way
4 Ω
55Hz-20kHz
89dB
50 Was
100 Was
PP Gunmetal
Butyl
1” swivel
silk dome
Steel
2.32”/ 59mm
SQ6922
6” x 9”
152 x 229mm
2-Way
4 Ω
45Hz-20kHz
89dB
70 Was
140 Was
PP Gunmetal
Butyl
1” swivel
silk dome
Steel
2.95”/ 75mm
4