TRNDlabs Ventura User manual

Ventura Wireless Headphones
Charging
Package Content
Edgy
Thank you for purchasing Ventura Wireless Headphones and welcome to the world of
TRNDlabs products.
Ventura is an elegant wireless pair of headphones which gives you non-stop sound in an
expressive design.
The high-end design of Ventura gives
you the ulmate experience of edge and
funconality in a pair of elegant black
leather headphones.
The baery of Ventura lasts at least
175 hours in standby mode and 16
hours with non-stop play.
While listening to music, Ventura
noes you of incoming calls which
you can pick up on the go supported by
Ventura’s build-in microphone.
Ventura connects via bluetooth to your
mobile device to give you the ulmate
wireless headphones experience.
Make Calls
Bluetooth
Ventura
Headphones
Charging
USB Cable
Protecve
Case
1
2
3
4
Standby
1 To charge your Ventura, plug the charging
cable provided with your package to the
USB port of your Ventura.
2Accordingly, plug the other end to a USB
charging port of your power source or
computer.
3Finally, A red LED-light will indicate that
your Ventura is charging.
4When your Ventura is fully charged, the
red LED-light will turn o.
User Guide
1
2
3
4
5
6
Headphone Funcons
1 Volume + Buon.
2 Volume - Buon.
3 Mul Funconal Buon (MFB).
4USB Charging Port.
5LED-light.
6Build-in Microphone.
Pairing with Bluetooth Device
1 Press the mulfunconal buon for
5 seconds. The blue and red LED-lights
start blinking alternately.
2Enable bluetooth on your device and
select scan/search for devices.
3Select ‘Ventura’ in the
list of devices.
4Your device will now connect
with your Ventura.
5 Aer successfully pairing your devices,
the upper blue LED-light on your
Ventura will light up connuously.
- To turn Ventura ON/OFFpress the MFB for 5 seconds.
- To increase/decrease the volume hold buon 1 or 2.
- To shi to the next/previous track press buon 1 or 2.
- To pick up or end a phone call tap the MFB.
- To reject a phone call hold the MFB for 2 seconds.
Volume up
Volume down
Power ON
Power OFF
Playback/Previous
Answer Calls
End Calls
Reject Calls
Operaon Instrucons

5
6
7
6
Troubleshoong
No power: Ensure your Ventura is charged
and has enough power for use. Please note
that your Ventura works while charging
as well.
No sound: Ensure your Ventura is on.
Ensure your Bluetooth device is on. If the
volume of the Ventura is too low, adjust
the volume to an appropriate level.
Unable to connect: Turn o your Ventura
and turn it back on. Your Ventura will
go into pairing mode. Select ‘Ventura
Headphones’ from the list on your
Bluetooth device to reconnect.
Poor sound quality: Ensure placing your
Ventura and your Bluetooth device in a
range of 33 (10 meter) sensing distance.
Accordingly, be sure to check that there
are no barriers that would block the signal.
• Do not expose your Ventura to extremely high or low temperatures.
• Do not leave your Ventura in direct sunlight for extended periods of me.
• Do not leave your Ventura near open ames such as cooking burners, candles, or replaces.
• Do not block any openings which serve as a venlaon funcon.
• Do not dispose your Ventura to re. The baery could explode causing fatal injuries.
• Charge the baery exclusively in accordance with the user manual instrucons provided with
your Ventura product package.
• Do not aempt to disassemble the Ventura’s charger or force open the built-in baery
because this may result in an electric shock.
• Do not clean your Ventura while it is being charged. Always unplug the charger rst before
cleaning your Ventura.
• Do not store your Ventura or any of its accessories near or over your automobile’s airbag
because serious injury may result in case of airbags deployment.
This product (including any accessories included in the original packaging) as supplied and
distributed in new condion, is warranted by TRNDlabs to the original consumer purchaser,
against defects in material and workmanship (“Warranty”) as can be found on www.trndlabs.com.
Warranty
•Leather is a natural material and is therefore
subject to change over me and with daily use.
Irregularies in the consistency and depth of
the color should not be considered a fault but
an inherent to the natural beauty of leather
products. Changes in colors are thus normal
and while occasional exposure to water is not a
problem for leather, leather and your Ventura
headphones are not waterproof!
•Exposure to high volume sound levels and
excessive sound pressure may cause temporary
or permanent damage to your hearing. Although
there is no single volume seng that is
appropriate for everyone, you should always use
your Ventura with the volume set at moderate
levels and avoid prolonged exposure to high
volume levels.
•Do not use abrasive cleaners to clean your
Ventura as that could cause scratches or damage.
•Do not bring your Ventura into contact with any
sharp objects as that could cause scratches or
damage.
•Do not insert anything into your Ventura unless
otherwise specied in the user instrucons.
Inserng foreign objects into your Ventura might
cause damage to the internal components.
•Do not aempt to repair, modify, or disassemble
your Ventura yourself, it does not contain any
user-serviceable components.
•Do not aempt to replace your Ventura’s baery,
it is built-in and is not changeable.
•Observe all signs and displays that require
an electrical device or RF radio product to be
switched o in designated areas.
•Turn o your Ventura prior to boarding an
aircra. Do not use your Ventura inside an
aircra unless other bluetooth devices are
allowed on the ight.
•Dispose of your Ventura and your Ventura’s
baery according to local regulaons. Do not
dispose the baery with regular household waste.
8
Please read the safety informaon carefully to ensure your personal safety
and prevent property damage.
Fire and electric shock hazard
Baery/charger hazard
Automobile accident hazard
Cauon
Speaker Dimension: 165 x 495 x 67 mm
Sensivity: 105 dB/1m W(S.P.L at 1 KHz)
Impedance: 32
Frequency Range: 20 Hz-20,000 Hz
Rated Power: 10 mW
Max. Power: 20 mW
Baery: 290 MAH
Charging Current: 100 MA
Standard Operang Voltage: 3.7 V
Bluetooth: CSR4.0 A2DP/AVRCP/HFP/HSP
Specicaons
User Guide