TRNDlabs Franklin User manual

vvvvvvvv
Franklin Wireless Headphones
Charging
Package Content
Foldable
Thank you for purchasing Franklin Wireless Headphones and welcome to the world of
TRNDlabs products.
Franklin is an elegant foldable wireless pair of headphones which gives you the freedom to take
your music everywhere you go.
The foldable design gives you the
ulmate packing privilege while you
are on the run.
While listening to music, Franklin
noes you of incoming calls which
you can pick up on the go supported by
Franklin’s build-in microphone.
The baery of Franklin lasts at least
175 hours in standby mode and
16 hours with non-stop play.
Franklin connects via bluetooth to your
mobile device to give you the ulmate
wireless headphones experience.
Make Calls Bluetooth
Franklin
Headphones
Charging
USB Cable
Carry Bag
1
2
3
4
Standby
1 To charge your Franklin, plug the charging
cable into the USB port of your Franklin.
2Plug the other end into a USB charging
port of your power source or computer.
3The red LED-light will indicate that your
Franklin is charging.
4When your Franklin is fully charged,
the red LED-light will turn o.
Headphones Funcon
1 Blue LED-light indicang acvity.
2 Mul-Funconal Wheel.
3USB Charging port.
4 Red LED-light indicang charging.
5Built-in Microphone.
Pairing with Bluetooth Device
1 Press the Mul-Funconal Wheel’s centre
posion for 5 seconds. The blue LED-light
indicang acvity will start to blink.
2Enable bluetooth on your device and
select scan/search for devices.
3Select ‘Franklin’ in the list of devices.
4Your device will now connect with
your Franklin.
5 Aer successfully pairing your devices,
the blue LED-light indicang acvity will
start to blink every 2 seconds.
1
2
3
45
Operaon Instrucons
Volume + / Next
Volume - / Previous
Power ON
Power OFF
Play / Pause
Answer Calls
End Calls
Reject Calls

Frequency Range: 20 Hz - 20 kHz
Impedance: 32 Ω
Bluetooth: V4.0 EDR, CSR, A2DP
Operang Distance: 10 meter
Charging Time: 2 - 3 hours
Play Time: 6 - 8 hours
Standby Time: 150 hours
5
6
7
6
Troubleshoong
No power: Ensure your Franklin is
charged and has enough power for use.
Please note that your Franklin works while
charging as well.
No sound: Ensure your Franklin is on.
Ensure your Bluetooth device is on. If the
volume of the Franklin is too low, adjust
the volume to an appropriate level.
Unable to connect: Turn o your Franklin
and turn it back on. Your Franklin will
go into pairing mode. Select ‘Franklin’
from the list on your Bluetooth device to
reconnect.
Poor sound quality: Ensure placing your
Franklin and your Bluetooth device in a
range of 3.3 (10 meter) sensing distance.
Accordingly, be sure to check that there
are no barriers that would block the signal.
• Do not expose your Franklin to extremely high or low temperatures.
• Do not leave your Franklin in direct sunlight for extended periods of me.
• Do not leave your Franklin near open ames such as cooking burners, candles, or replaces.
• Do not block any openings which serve as a venlaon funcon.
• Do not dispose your Franklin to re. The baery could explode causing fatal injuries.
• Charge the baery exclusively in accordance with the user manual instrucons provided with
your Franklin product package.
• not aempt to disassemble the Franklin’s charger or force open the built-in baery because
this may result in an electric shock.
• Do not clean your Franklin while it is being charged. Always unplug the charger rst before
cleaning your Franklin.
• Do not store your Franklin or any of its accessories near or over your automobile’s airbag
because serious injury may result in case of airbags deployment.
This product (including any accessories included in the original packaging) as supplied and
distributed in new condion, is warranted by TRNDlabs to the original consumer purchaser,
against defects in material and workmanship (“Warranty”) as can be found on www.trndlabs.com.
Warranty
•Exposure to high volume sound levels and
excessive sound pressure may cause tempo-
rary or permanent damage to your hearing.
Although there is no single volume seng
that is appropriate for everyone, you should
always use your Franklin with the volume
set at moderate levels and avoid prolonged
exposure to high volume levels.
•Do not use abrasive cleaners to clean your
Franklin as that could cause scratches or
damage.
•Do not bring your Franklin into contact with
any sharp objects as that could cause scrat-
ches or damage.
•Do not insert anything into your Franklin
unless otherwise specied in the user
instrucons. Inserng foreign objects into
your Franklin might cause damage to the
internal components.
•Do not aempt to repair, modify, or disas-
semble your Franklin yourself, it does not
contain any user-serviceable components.
•Do not aempt to replace your Franklin’s
baery, it is built-in and is not changeable.
•Observe all signs and displays that require
an electrical device or RF radio product to
be switched o in designated areas.
•Turn o your Franklin prior to boarding an
aircra. Do not use your Franklin inside an
aircra unless other bluetooth devices are
allowed on the ight.
•Dispose of your Franklin and your Franklin’s
baery according to local regulaons. Do
not dispose the baery with regular house-
hold waste.
8
Fire and electric shock hazard
Baery/charger hazard
Automobile accident hazard
Cauon
Please read the safety informaon carefully to ensure your personal safety
and prevent property damage.
Specicaons