Specifications
Step 1: Activate the TC-1 by connecting the power, and
then make sure to have a stable internet connection
(wired / wireless 2.4g).
Step 2: Make sure your TM+ phone app is in the latest
version. (Delete and reinstall the app if you are not
certain) After logging into the phone app, tap the
Hydro-X controller that you would like to monitor with
TC-1.
Step 3: Tap “Camera” at the bottom right corner, then
tap “Add Device”.
Step 4: Scan the QR Code from the sticker on the TC-1.
Next, choose to connect with Ethernet or Wi-Fi at the
top right corner before proceeding. (you’ll need to
input your router login if you pick Wi-Fi. Make sure
your phone is unmuted, your Wi-Fi info will encrypt and
transform into a sound frequency, make sure it is loud
enough so TC-1 can hear it.)
Step 5: When setup is complete, you’ll hear “connection
successful”. Now you will be able to see live footage on
the controller’s main screen.
Instructions
1. Monitor and Control with TrolMaster’s phone app
2. IP66 water-resistant
3. Support H.264 codec - High-Efficiency Video
Coding (HEVC)
4. High-resolution live video transmission
5. SD expandable storage up to 128GB
6. Invisible IR illuminators for night vision up to 10
meters
7. Light detection
8. Motion detection
Features
Output Voltage :
Camera Unit：
12.0V, 2.0A
100-240V AC, 50/60Hz 0.8A
100-240V AC, 50/60Hz 0.8A
6mm fixed-focus lens
3 Megapixels Camera
(resolution - 2048x1536)
6 Invisible IR illuminators
1 Ethernet Port
2 Wi-Fi antennas
Dimensions & G.W.: 160x 165x 110mm
Approx. G.W. 482g
