Troy-Bilt 12AI836 Series Guide

Read and understand all instruction, warning, and danger labels.
IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY AND
FOLLOW THE SAFE OPERATION PRACTICES BEFORE OPERATING .
Lea el manual de operación anexo sobre ensamblaje e inicio.
Need Help? Call 1-888-TO-HELP-U (1-888-864-3578)
Use cable
tie to secure
cables to
lower handle.
1
2
3
4
Refer to Operator’s Manual for instructions on attaching the grass catcher.
12AI836 © 2007 778-11501
Starter
Rope
Blade Control
Handle
Star Knobs
(A) Hold blade
control handle
against upper
handle.
(B)(C) Slowly
slip starter
rope into rope
guide.
(D) Tighten
rope guide
wing knob.
(A) Lift handle
to extended
position.
(B) Tighten star
knobs.
A
B
B
Place ends of
lower handle
onto handle
brackets.
Tighten star
knobs.
A
C
D
B

Read and understand all instruction, warning, and danger labels.
IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY AND
FOLLOW THE SAFE OPERATION PRACTICES BEFORE OPERATING .
Lea el manual de operación anexo sobre ensamblaje e inicio.
Need Help?
Call 1-888-TO-HELP-U
Lea el manual de operación anexo sobre ensamblaje e inicio.
Fill tank with gas to within 1/2-inch of
top of tank.
Fill engine with entire contents of oil bottle
supplied.
5
6Need Help?
Call 1-888-TO-HELP-U
Gas Cap
Oil Fill
Depress blade control handle and hold.
8
7
Pull starter rope with quick, full arm stroke.
If engine does not start after ten seconds of
repeated pulls, wait a few minutes and repeat
steps 7 through 8.