Trustech LDS33-40PE-RC User manual

16” CONVERTIBLE FAN WITH REMOTE CONTROL
MODEL: LDS33-40PE-RC
OWNER’S MANUAL
NOTE: FOR HOUSEHOLD USE ONLY. NOT INTENDED FOR COMMERCIAL USE.
Thank you for choosing Trustech fan!
This user manual will provide you with information for the proper care and maintenance of
our product. Please take a few moments to read it thoroughly and start enjoying your cool
summer!
Always here to help you
For any questions or help, please email us: [e-mail]

IMPORTANT INSTRUCIONS
RULES FOR SAFE OPERATION
Please read and understand all instructions before using this fan.
When using electrical appliances, basic precautions should always be followed to reduce the
risk of fire, electrical shock, and injury to person or property, including:
1. Never insert objects such as fingers, pencils, etc., through the grille when the fan is
running.
2. Disconnect fan from the electrical outlet when moving it between distance, or when
removing its grilles or cleaning it.
3. Be sure the fan is on a stable and even surface when operating to avoid overturning.
4. DO NOT use the fan in a window. Rain may cause an electrical hazard. Do not leave the fan
operating near a watery area to avoid the potential of electrical hazards. Do not immerse the
unit, plug or cord in water or expose in liquids.
5. This appliance has a polarized plug (one blade is wider than the other). To reduce the risk
of electrical shock, this plug is intended to fit in a polarized outlet only one way. If the plug
does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified
electrician. Do not attempt to defeat this safety feature.
6. Do not leave the appliance running or operable in a place where young children or animals
could have access to it without supervision. Do not allow the cord to hang down from tables
or counter.
7. Do not operate any appliance with a damaged cord or plug, after the appliance
malfunctions or has been dropped or damaged in any manner, contact a qualified electrician
should this happen. NOTE: Repairs made by unqualified electricians will void this product's
warranty.
8. Do not operate in the presence of explosive and/or flammable fumes.
9. Do not place fan or any parts near an open flame, cooking or other heating appliance.
10. Do not use this fan outdoors or where there are bodies of water such as the bathroom or
laundry room.
11. Do not use fan without its base. The fan must operate standing upright.
12. Do not use fan near curtains, plants, window treatments, or where other objects can
become caught in the blades.
13. To disconnect, grip plug and pull from wall outlet. Never yank on cord.
14. Do not run cord under carpeting. Do not cover cord with throw rugs, runners or the like.
Arrange cord away from traffic area where it will not be tripped over.
15. Use this fan only as it is described in this manual.
NOTE: There are no serviceable parts in this unit. Do not attempt to dissemble.
WARNING: To reduce risk of fire or electrical shock, do not use this fan with any solid-state
speed control devices.
READ & SAVE THESE
INSTRUCTIONS

Fig.1
1. Front grille
2. Metal nut
3. Fan blade
4. Plastic nut
5. Rear grille with handle
6. motor shaft
7. Motor housing
8. Upper column
9. Remote holder
10. Control panel
11. Upper column knob
12. Power cord
13. Adjustable column (for pedestal fan)
14. Height adjustment locking nut (for pedestal fan)
15. Lower column (for pedestal fan)
16. Adapter

17. Base
18. Remote control
19. Adapter (For table/floor use)
20. Snapping lock pin
21. Lock screw
22. Fused plug
ASSEMBLY OF BASE（Parts #8.#11.#13-17）
For Pedestal Fan
1. Remove parts from packaging. Set the fan base (#17) on the floor. Insert lower column
with adaptor (#16) into the base and secure them by turning the lower column clockwise.
2. Loosen the height adjustment locking nut (#14) and pull up the adjustable column (#13);
to the desired height and re-tighten the height adjustment locking nut (#14).
3. Place the upper column (#8) on top of the adjustable column (#13). Tighten the upper
column knob (#11).
For Table Fan
1. Set the fan base (#17) on the table, insert the connecting adapter (#19) into the base and
secure them by turning the connecting adapter (#19) clockwise.
2. Place the upper column (#8) on top of the connecting adapter (#19). Tighten the upper
column knob (#11).

ASSEMBLY OF BLADE AND GRILLES（Fig.2 #1-7.#19.#20）
Fig.2
Fig.3
1. Remove and discard the plastic sleeve on the motor shaft (#6). Position the rear grille (#5)
against the front of the motor housing through the motor shaft (#6). Ensure the handle at
the back of grille (#5) is facing up and that all guiding pegs on the motor housing are lined up
with cutouts on the rear grille (#5).
2. Secure the rear grille (#5) with the plastic nut (#4). Fasten the plastic nut (#4) in a
CLOCKWISE direction, firmly placing the rear grille (#5) on the motor housing (#7).
3. Install the fan blade (#3) onto the motor shaft (#6) with the cutouts fitted, and then place
spinner (#2) on the motor shaft (#6) too. Fasten into place by tightening the metal knob (#2)
in a COUNTER-CLOCKWISE direction.

4. Fit front grille (#1) against rear grille (#5) by aligning the alignment mark on the top of the
grilles, closing them together by the hooks on front grille and slots on the rear grille, twisting
the front grille clockwise to the lock position (see Fig. 3), the snapping lock pin (#19) should
pop in.
Note: to disassemble the front grille, gently pull the snapping lock pin outwards while
twisting the front grille in a counterclockwise direction.
5.Tighten the lock screw (#21) to secure the snapping lock pin (#20).
OPERATING INSTRUCTIONS
Plug fan into a 120V/60Hz outlet and follow the operating instructions:
USING THE CONTROL PANEL AND REMOTE CONTROL
This fan is designed with 4 speeds, 3 breeze modes, timing, and remote control
function. For your convenience, the buttons on the control panel of the fan operates
the same functions as the remote control.

BUTTON
FUNCTION
SOLUTION
TIMER
Pressing this button
sets the timer in
increments of 0.5
hours to a maximum
of 7.5 hours. After the
timer runs out, the fan
will
automatically shut off.
4 indicators (0.5H, 1H, 2H, 4H) on the panel will
light up when you press the timer button. Total
hours on the illuminated indicators are the total
time that the timer will work before it shuts off.
Example 1: When 0.5H illuminates, the timer will
shut off in 30minutes.
Example 2: When 0.5H and 2H illuminates at the
same time, the timer will shut off in 2.5 hours
Example 3: When 0.5H, 1H, 2H and 4H illuminates
at the same time, the timer will shut off in 7.5
hours.
MODE
Pressing this button to
choose different
patterns of breeze.
When this icon lit, the fan is simulating a
NATURAL breeze mode.
When this icon lit, the fan is simulating a
softer breeze mode (SLEEP MODE), for resting.
and lights are OFF
If above icons are both off, the fan is operating in
a NORMAL mode.
SPEED
Pressing this button
chooses fan speeds
from 4 modes
(High/Medium/Low/Ec
o). This button can be
used with any MODE.
These icons indicate the speed low, medium,
high, Eco respectively. The speed will be selected
when its icon lights.
OSCILLATION
To activate the
oscillation function for
widespread breeze
distribution, press this
oscillation button
once.
The oscillation icon lights up when oscillation
function is activated. Press button again to tum
off the oscillation function. Oscillation can be
controlled while the fan is operating.
ON/OFF
Pressing this button
turns the fan ON or
OFF.
Use this button to turn the fan ON and OFF.

USING THE REMOTE CONTROL
OPERATION IS SUBJECT TO THE FOLLOWING CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE
INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE, INCLUDING
INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION OF THE DEVICE.
For your convenience, the remote control features the same buttons as the fan control
panel. Follow the operations in"USING THE CONTROL PANEL".
Guidelines for using the remote control (one CR2025 battery included):
Note: Remove the plastic insulation film located underneath the battery before using the
remote.
· The remote control must be pointed towards directly the receiver on the fan when using.
· The working range for the remote control is 5 meters. If the remote control is not pointed
directly towards the receiver, the range will be decreased.
· The remote control may not operate in a room where heavy machinery is operating.
· Do not block the line of sight between the remote control and the receive.
· Handle the remote control with care. Do not drop the remote control on the floor or bang it
against hard objects.
Guidelines for use of batteries
· If the remote control will not be used for a long period of time, remove the batteries from
the battery compartment.
· The remote control uses one CR2025 battery.
· Clean battery contacts and those of the device prior to battery installation.
· Ensure the batteries are installed correctly with regard to polarity, matching +/- sides of the
battery to corresponding indications on the remote control.
· Remove used and dead/discharged batteries promptly.

Dispose of the battery
· The battery must be brought to a household hazardous waste collection site for proper
handling.
SETUP OPTIONS FOR IMPROVED AIR CIRCULATION
This fan has 3 functions which will allow you to better customize your preferred air comfort
as well as improve air circulation in the room.
A. OSCILLATION:
To activate the oscillation function for widespread breeze distribution, press the button.
To turn off the oscillation function for a targeted breeze setting, press again. Controlling the
oscillation can be done while the fan is operating. This fan has an enhanced oscillation angle
of 120 degrees for better circulation.
B. TILT:
To tilt the fan head so that the breeze is targeted at an angle, turn the fan off and steady the
motor housing of the fan with one hand and grip the fan grille with another. Carefully tilt the
head of the fan as depicted in until it reaches the desired angle. Be careful as to not tilt the
head back further than it is intended to go, doing so will damage the unit. The maximum tilt
is almost to the horizontal position.
NOTE: The fan must be turned off when performing this adjustment.
C. HEIGHT ADJUSTMENT FOR FLOOR CONVERSION:
To adjust the height of the fan, turn the fan off, grip between the upper column (#8) /
adjustable column (#13) and loosen the height adjustment locking nut (#14). Extend or lower
the adjustable column to increase or decrease the height of the fan. Once the fan is at a
comfortable height, tighten the height adjustment locking nut (#14).
To convert you fan to a floor fan, please see assembly instructions.
NOTE: The fan must be turned off when performing this adjustment.
SPECIFICATION
MODEL/SKU
LDS33-40PE-RC
VOLTAGE（V）
110-120V, 60Hz
WATTAGE（W）
65W
CAUTION: TO PREVENT ELECTRICAL SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT,
FULLY INSERT.

CLEANING AND MAINTENANCE
1. Always disconnect the plug from the electrical outlet when cleaning your fan.
2. Light accumulated dust at the back grille of the fan may be removed with a soft cloth.
3. Wipe the exterior surfaces of the fan occasionally with a damp cloth (not dripping wet)
and dry thoroughly with a soft dry cloth before operating the fan.
4. Do not use harsh cleaners or materials to clean this unit, doing so will cause damages to it.
CAUTION: DO NOT ALLOW WATER TO RUN INTO THE INTERIOR OF THE FAN AS THIS COULD
CREATE A FIRE OR ELECTRIC SHOCK HAZARD. THE FAN MOTOR IS FACTORY LUBRICATED
FOR LIFE AND WILL REQUIRE NO FURTHER LUBRICATION. NO OTHER USER MAINTENANCE
IS REQUIRED OR RECOMMENDED.
STORAGE
1. Follow cleaning instructions 1 to 4 above. Make sure to disassemble and clean fan before
storing.
2. Retain the original packaging to store your fan.
3. Always store in a dry place.
4. Never store while still plugged in.
5. Never wrap cord tightly around the fan or put any stress on the cord where it enters the
fan as it could cause the cord to fray or break.
TROUBLE SHOOTING
If your fan fails to operate, please follow these procedures prior to contacting customer
service:
PROBLEM
PROBABLE CAUSE
SOLUTION
Fan is not turning on.
Fan is not plugged into a
120V AC, 60Hz polarized
outlet/receptacle.
Plug in unit and attempt to turn on
again.
Breaker has tripped or
fuse has been blown.
Please check your electrical box to
confirm the breaker has not been
tripped and the fuse has not been
blown.
Plug in unit and attempt to turn on
again.
Attempt to plug unit in another
receptacle in the house.
Fuse in power plug has
been blown.
Follow the instructions on the power
plug tag to replace the fuse.

The fan was working,
but suddenly tuned off.
The timer setting has
counted down to
automatic shut off.
Ensure all the timer lights on the
control panel
0.5H, 1H, 2H, 4H are off. If any of them
are lit, continue to press the timer
button until all the timer lights are
off. For more information see
"OPERATINGINSTRUCTIONS" section
for the TIMER
Oscillation function is
not working.
The oscillation function
has not been activated.
Ensure the indicator is lit. If it is
not, press the button to start the
oscillation function. This can be done
while the fan is operating.
Fan is on but air coming
out of it is not strong
enough.
There is dust built up at
the back of the fan.
Turn fan OFF and unplug. Using a soft,
dry cloth, wipe the back of the grille to
remove any dust build-up. Plug in unit
and turn fan back ON to resume
normal operation.
The remote control is
not working.
The batteries are weak.
Refer to OPERATING INSTRUCTIONS
regarding the
remote control on page 6. Guidelines
for using the remote control (one
CR2025 battery included) and
Guidelines for use of batteries.
The remote control is
too far from the main
fan.
The remote control is
not sending a signal to
the main fan.
PLEASE DO NOT ATTEMPT TO OPEN OR REPAIR THE FAN YOURSELF. DOING So COULD VOID
THEWARRANTY AND CAUSE DAMAGE OR PERSONAL INJURY.

WARRANTY
TRUSTECH warrants this product against defects in materials and/or workmanship under
normal use for a period of ONE (1) YEAR from the date of purchase by the original purchaser
(“Warranty Period”). If a defect arises and a valid claim is received within the Warranty
Period, at its option, TRUSTECH will either 1) repair the defect at no charge, using new or
refurbished replacement parts, or 2) replace the product with a new product that is at least
functionally equivalent to the original product, or provide a store credit in the amount of the
purchase price of the original product. A replacement product or part, including a
user-installable part installed in accordance with instructions provided by TRUSTECH,
assumes the remaining warranty of the original product. When a product or part is
exchanged, any replacement item becomes your property and the replaced item becomes
TRUSTECH’ s property. When a store credit is given, the original product must be returned to
TRUSTECH and becomes TRUSTECH’ s property. To obtain warranty service, e-mail TRUSTECH
Limited Warranty Service at [e-mail]. Please be prepared to
describe the product that needs service and the nature of the problem.
This warranty does not apply to:
a) damage caused by failure to follow instructions relating to product’ use or the
installation of components; b) damage caused by accident, abuse, misuse, fire, floods,
earthquake or other external causes; c) damage caused by service performed by anyone who
is not a representative of TRUSTECH; d) accessories used in conjunction with a covered
product; e) a product or part that has been modified to alter functionality or capability; f)
items intended to be periodically replaced by the purchaser during the normal life of the
product including, without limitation, batteries or light bulbs; g) any product sold “as is”
including, without limitation, floor demonstration models and refurbished items; or h) a
product that is used commercially or for a commercial purpose.

CONTACT US
Thank you for choosing Trustech product.
For any questions of your product or honor your warranty, Please scan
the QR code below to get our [24-hour online vip service ]or write to
[[e-mail]] Our customer service time will
response ASAP within 24 hours!