POWER ON/OFF
Hold down the Power button for 3 seconds to
start the unit. After about 1 minute the unit will
be ready to use. The lens will move in and out a
few times while the camera initializes. If the unit
doesn't start, the likely cause is the battery is not
charged. To charge the battery, plug in the
power adapter to an electrical outlet and use the
provided USB cable to connect the device to the
charger.
After charging for 30 minutes the unit should
have sufficient power to start. However, to fully
charge the unit it will take 3-4 hours. To power
off the unit, hold down the power button for 3
seconds. A short sound will play indicating the
unit is shutting down. The lens will retract into
the body of the camera and this indicates the
camera has been turned off.