TSS 3x3 Power Rack with Hi/Low Cable System User manual

Basic 3x3 Power Rack

Read all safety warnings, instructions and
illustrations provided for this piece of strength
equipment. Failure to follow all instructions listed
below may result in serious injury or death. User assumes all potential
risks of assembly or use of this product.
PERSONAL SAFETY
●Stay alert, watch what you are doing when assembling and operating the
strength equipment. Do not use the strength equipment while you are
tired or under the influence of drugs, alcohol or medication. A moment
of inattention while operating or assembling the strength equipment may
result in serious or fatal injury.
EQUIPMENT USE AND CARE
●Visually inspect all components in order to identify potential
deformation or damage. If damages are observed, discontinue assembly
and contact the manufacturer at [email protected],
[email protected].
●Multiple components involved with assembly of this piece of strength
equipment are above 50lbs and it is recommended that you have an
additional person to assist in the positioning of these items.
●Ensure that all components are securely fastened before use.
1

Required Tools
●Crescent Wrench
●1 ⅛” Socket and Wrench
Parts
3PR-001 |(x1) |Part A
OR
*3PR-100 |(x1) |Part MB*
(Upgrade; Replaces Part A)
3PR-002 |(x2) |Part B
3PR-003 |(x1) |Part C
3PR-004 |(x2) |Part D
3PR-005 |(x2) |Part E
3PR-006 |(x2) |Part F
2

¾ x 4.5” Bolt |(x8) |Part G
¾” Nut |(x8) |Part H
¾” Flat Washer |(x8) |Part I
¾” Lock Washer |(x8) |Part J
3

Assembly
4

*Repeat image above for all holes in part C and part A*
5

*Place parts D, E, and F in desired location*
6

You have now completed assembling your very own 3x3 Rack! Thank
you for choosing Texas Strength Systems for your fitness needs. If you
have any questions, comments, or concerns please don’t hesitate to
contact our staff.
Contact Information
Email: [email protected]
Phone: [phone]
7