Turbo Incanto TD8288SS User manual

TD8288SS CHIMNEY HOOD USER MANUAL

1
Users Manual Dear Valued Customer,
Thank you and congratulations on purchasing our appliance. All our products are
made to the highest quality and design standards. We are sure you will enjoy your
new appliance. Please ensure this manual is read carefully before installation and
use. If you follow the recommendations contained in this Instruction Manual, our
appliance will give you constant high performance and will remain efficient for
many years to come. Please take special note of all detailed technical information
and installation instructions. It is essential that you only allow a qualified technician
to install this appliance to ensure the safety and reliability of this appliance.
Furthermore, not using appropriate personnel to install this appliance may affect
any future warranty claims lodged, so please check with us before any installation is
carried out.
We hope you enjoy your new appliance.
Contents
Warning & Safety ……………………………………………………………………………………………. 2
Preparation before installation ....…………………………………………………………................. 3
Installation Steps ……………………………………………………………………………………….….… 4
Operation &. Malntenance …………………………………………………………………………….…5

2
Warning & Safety
Warning
Our products comply with laws and regulations. However, any misuse might
lead to personal injury or appliances damaged.
Read the manual carefully. It contains important information regarding
installation safety and maintenance. Keep this manual in a safe place for
future reference.
Safety
In certain circumstances, electrical appliances may be a danger hazard:
•Do not check the status of the filters while the canopy is operating.
•Do not use this product outdoor.
•Disconnect the electrical plug prior to any maintenance.
•Children don’t recognize the risks of electrical appliances. Therefore use or
keep the appliance only under supervision of adults and out of the reach from
children.
•This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
•Children should be supervised to ensure that they do not play with the
appliance.
Safety Precaution
Take care when the canopy is operating simultaneously with an open fireplace or
burner that depends on the air in the environment as the canopy removes the air
from the environment which a burner or fireplace need for combustion. The
negative pressure in the environment must not exceed 4Pa (4x10-5 bar). Provide
adequate ventilation in the environment for safe operation of the canopy. Follow the
local regulations in force for external air evacuation. Preparation before installation

3
Preparation before installation
Technology Safety
•Assembly and electrical connections must be carried out by qualified personnel.
•An earth cable is necessary.
•The products must be installed so that the plug/main switch is easily
accessible.
WARNING!
In certain circumstances, electrical appliances may be a danger hazard:
•Do not check the status of the filters while the canopy is operating.
•Do not touch bulbs or adjacent areas, during or straight after prolonged
use or operation.
•Flambécooking is prohibited underneath the canopy
•Before connecting the model to the electricity network. Ensure the
voltage and data on the data plate correspond to the network and socket.
If in doubt, contact a qualified electrician.

4
Installation Steps
Steps:
Note 1: Carefully remove the protective film from chimney and front panel prior to
final installation.
Note 2: Mount the hood.
Fixing to the wall
1. Drill the holes according to the distances indicated.
2. Fix the appliance to the wall and align it in horizontal position to the wall units.
3. When the appliance has been adjusted, fix the hood using the screws.For the
various installations use screws and screw anchors suited to the type of wall
(e.g. reinforced concrete, plasterboard, etc.). If the screws and screw anchors
are provided with the product, kindly check the screws are suitable for the
type of wall in which the hood is to be fixed.
TD8288SS

5
Operation & Maintenance
Operation
Touch light button once to ch on and twice to switch off the light. Touch/Slide on the
speed bar to adjust speed level, be reminded that intensive speed (4th speed) only
lasts for 3 minutes and automatically exit to 3rd speed while you can restart it by
touching on the end section of speed bar again. Touch delay-off button once to enter
3-minute delay-off mode and touch twice to switch off the hood immediately.
MAINTENANCE
Glass and aluminum are two of the easiest materials to keep clean. Occasional care
will help preserve its fine appearance.
Cleaning tips:
•Hot water with soap or detergent is all that is usually needed.
•Follow all cleaning by rinsing with clear water. Wipe dry with a clean, soft cloth
to avoid water marks.
•For discolorations or deposits that persist, use a non-scratching household
cleanser or stainless steel polishing powder with a little water and a soft cloth.
•For stubborn cases use a plastic scouring pad or soft bristle brush together with
cleanser and water. Rub lightly in direction of polishing lines or “grind” of the
aluminum finish. Avoid using too much pressure that may mar the surface.
•Do not allow deposits to remain for long period of time.
•Do not use ordinary steel wool or steel brushes. Small bits of steel may adhere
to the surface causing rust.
•Do not allow salt solutions, disinfectants, bleaches, or cleaning compounds to
remain in contact with aluminum finish for extended period. Many of these
compounds contain chemicals that may be harmful. Rinse with water after
exposure and wipe dry with a clean cloth.
•Painted surfaces should be cleaned with warm water and mild detergent only.