Turtle Tough TT Series User manual

USER MANUAL
TT SERIES INTELLIGENT
THERMAL IMAGING CAMERA
turtletoughsensors.com

Thank you for choosing our product. Please thoroughly go through the user manual
before operaon and keep it well for future reference. All photo’s in the manual
are for reference only and specicaons are subject to the phisycal product.

The product is a handheld thermal infrared imager for temperature measurement.
It is designed with 110592/19200 eecve IR pixels; and is congured with laser,
illuminang lights and visible light of 5 mega-pixel. The product can be connected
to PCs, SD cards, mobile devices (IPHONE or Android devices), HDMI displays
etc., meeng requirements for various applicaons.
IMPORTANT
This is a general manual covering mulple models of thermal imagers from a
common product line, so some funcons and descripons in the manual may not
apply to your thermal imagers.
USER MANUAL
TT SERIES INTELLIGENT

Please always follow the following precauons strictly:
• Keep the device as stable as possible to prevent shaking violently.
• Don’t use the device at operang temperatures not allowed nor place it in an
environment at a storage temperature not allowed.
• Do not align the device with strong thermal emiers, such as the sun,
lasers and spot welders.
• Don’t expose the device in a dusty or moist environment. Prevent water
from splashing onto the device when using it in an environment with water.
Cover the lens when not using the device.
• Place the device and all its accessories into a special packing box when not
using it.
• Do not block any hole on the device.
• Do not knock at, throw or vibrate the device and its accessories so as to
prevent damages.
• Please don’t disassemble the device so as to prevent it from being damaged
possibly and you from losing warranty.
• Don’t use the TF card for other purposes.
• Don’t use the device in an environment exceeding its operang temperature so
as to prevent possible damages.
• Do not apply dissolvable or similar liquid to the device and cables so as to
prevent possible damages.
• The device is powered by a rechargeable Lithium-ion baery so users must
follow the following precauons strictly in order to use it safely:
• Never try to open or dismantle the baery.
• Don’t place the baery in a high temperature environment or nearby a high
temperature object.
• Don’t short-circuit the baery.
• Don’t put the baery in a moist environment or in the water.
• Once the liquid leaked from the baery enters eyes, ush the eyes with clear
water immediately and take corresponding medical cares.
• Please charge the baery as introduced in the manual and follow the charging
steps and precauons. Wrong charging may heat or damage the baery or
even cause injuries.
• Pull out the baery if the device will not be used for a long me.
• Wipe the device as described below:
• Non-opcal surfaces: Use clean and so cloth to wipe non-opcal surfaces of
the thermal imager when necessary.
• Opcal surfaces: Please avoid staining the opcal surface of lens when
using the thermal imager, especially avoid touching the lens with hands since
the sweat on the hands may leave traces on the lens and corrode the opcal
coang on the lens surface. When the opcal lens surface is stained, wipe it
with special lens wiping paper.
PRECAUTIONS

Precauons for use of baeries:
• The baery can be charged repeatedly. However, the baery is a vulnerable
part. If standby me of the device is largely shortened, please replace its
baery with an original one provided by the company.
• If the device operates for a long me especially at high temperatures, its
surface will warm up normally. When it’s hot, please stop charging it and
move it to the shade. Please avoid touching hot surfaces for a long me.
• When charging the device, it’s suggested to use original baeries and
charge cables provided by the company.
• Baery charging me varies with temperatures and its use.
• When the baery level is low, the system will give a low baery level
prompt.
• When the baery level is too low, the system will be turned o
automacally.
• If the device gives no response when the power buon is pressed, the
baery has been run out and the device can be launched only aer being
charged with an original charger for more than 10 minutes.
• When the baery is charged, the side indicator light on the device will
always be red.
• When the baery is fully charged, the side indicator light on the device will
turn green from red, indicang that it’s not necessary to chargethe baery
any more.
PRECAUTIONS
Chapter 1 ListofItems.................................................................. 2
Chapter 2 ListofProductComponents........................................ 4
Chapter 3 AGlanceatFunctionalAreasoftheDevice................ 8
A Instruction to each functional area............................ 8
B Gallery........................................................................ 9
C Short-cut menu......................................................... 10
Chapter 4 Observation.................................................................. 14
Image mode switch....................................................... 14
Temperature measurement........................................... 15
E-zoom.......................................................................... 16
Chapter 5 Shooting....................................................................... 18
Pictureshooting.......................................................... 18
Adding notes.......................................................... 19
Adding shooting notes........................................... 20
Adding text note.................................................... 21
Adding audio note................................................. 21
Adding grafti note................................................ 22
Videorecording........................................................... 23
Real-timeanalysis....................................................... 24
Contents
PRECAUTIONS
（充电指示灯）
the battery has been run out and the device can be launched only after
being charged with an original charger for more than 10 minutes.
•When the battery is charged, the side indicator light on the device
will always be red.
•When the battery is fully charged, the side indicator light on the
device will turn green from red, indicating that it's not necessary to charge
the battery any more.
未充满 已充满
Not fully
charged
Fully charged
(Charging indicator light)

Chapter 1 List of items 8
Chapter 2 List of product components 10
Chapter 3 A Glance at Funconal Areas of the Device 13
A Instrucon to each funconal area 14
B Gallery 15
C Short-cut menu 16
Chapter 4 Observaon 17
Image mode switch 18
Temperature measurement 19
E-zoom 20
Chapter 5 Shoong 21
Picture shoong 22
Adding notes 23
Adding shoong notes 24
Adding text note 25
Adding audio note 25
Adding gra note 26
Video recording 27
Real-me analysis 28
Adding/removing the analysis object 28
Resizing the analysis object 29
Palee switching 30
Manual brightness/contrast control 31
Temperature dierence analysis 32
File browsing 33
Picture analysis 34
Picture eding 34
Picture zoom-in/-out 35
PDF creaon & prinng 36
Video replay 37
Isotherm 38
Down isotherm 38
Up isotherm 38
Outside-the-range isotherm 38
Customizable emissivity 39
CONTENTS

Chapter 6 Global Sengs 40
System sengs 41
Central temperature cursor 41
Temperature measurement range 41
Switch of temperature units 41
Switch of distance units 41
Alarm sengs 42
High temperature alarm 42
Low temperature alarm 43
Brightness 43
Scheduled shutdown 43
Scheduled sleep 44
Volume 44
Vibraon feedback 44
Automac lens recognion 45
Disabling automac lens recognion 45
Full Temperature Marker 45
Color of isotherm 45
Local sengs 46
photo seng 46
Report seng 46
Date/Time 46
Languages 47
Watermark sengs 47
Connecon sengs 48
WIFI switch 48
WIFI hotspot conguraon 49
About upgrade 50
TF card upgrade 50
Memory space 50
Formang the TF card 51
Restoring the default sengs 51
CONTENTS

Chapter 7 Connecon with External Device 52
Port Connecon 53
Mini HDMI Interface 53
USB Interface 53
Used along with Applicaon Soware 54
Installing Memory Card and Lens 56
Installing Memory Card 56
Removing Memory Card 57
Installing Oponal Lens 58
Installing High-temperature Lens 59
External Connecon 60
Wireless AP Seng 60
Latest version IOS/Android Acquisions 60
Chapter 8 Troubleshoong Guide 61
CONTENTS

Chapter 1
List of Items
Standard accessories:
Thermal imager
Lithium baery (1)
Adapter (including an adapter plug)
USB cable
Wristband
HDMI connecng line
Quick operaon guide
Specicaon
Compact disk
List of accessories
TF card (16GB)
Oponal items:
Lithium baery
Portable package
Charging dock

Sunshade
D Series Intelligent Thermographic IR Camera
5 / 8www.guideir.com
Copyright
© 2017, Wuhan Guide
Sensmart Tech Co., Ltd.
Li-ion Battery
HDMI Cable (2m)
USB Cable (2m)
Wrist Strap
CTP Glove Set
TF Card(16G)
User Manual
Quick Start Guide
Accessories List Card
Product CD
Camera Pouch
Charging Dock
Sunshade
Bluetooth Headset
Bluetooth Headset
D Series Intelligent Thermographic IR Camera
5 / 8www.guideir.com
Copyright © 2017, Wuhan Guide Sensmart Tech Co., Ltd.
Li-ion Battery
HDMI Cable (2m)
USB Cable (2m)
Wrist Strap
CTP Glove Set
TF Card(16G)
User Manual
Quick Start Guide
Accessories List Card
Product CD
Camera Pouch
Charging Dock
Sunshade
Bluetooth Headset
Camera Pouch
D Series Intelligent Thermographic IR Camera
5 / 8www.guideir.com
Copyright
© 2017, Wuhan Guide
Sensmart Tech Co., Ltd.
Li-ion Battery
HDMI Cable (2m)
USB Cable (2m)
Wrist Strap
CTP Glove Set
TF Card(16G)
User Manual
Quick Start Guide
Accessories List Card
Product CD
Camera Pouch
Charging Dock
Sunshade
Bluetooth Headset
Charging Dock
D Series Intelligent Thermographic IR Camera
5 / 8www.guideir.com
Copyright
© 2017, Wuhan Guide
Sensmart Tech Co., Ltd.
Li-ion Battery
HDMI Cable (2m)
USB Cable (2m)
Wrist Strap
CTP Glove Set
TF Card(16G)
User Manual
Quick Start Guide
Accessories List Card
Product CD
Camera Pouch
Charging Dock
Sunshade
Bluetooth Headset
Li-ion Baery
D Series Intelligent Thermographic IR Camera
5 / 8www.guideir.com
Copyright
© 2017, Wuhan Guide
Sensmart Tech Co., Ltd.
Li-ion Battery
HDMI Cable (2m)
USB Cable (2m)
Wrist Strap
CTP Glove Set
TF Card(16G)
User Manual
Quick Start Guide
Accessories List Card
Product CD
Camera Pouch
Charging Dock
Sunshade
Bluetooth Headset
OPTIONAL ACCESORIES
LIST OF ITEMS ACCESORIES
Shipping Content Qty
Infrared camera with lens Infrared
Standard accessories
Li-ion Baery x1
Power Adapter x1
Adapter Plug x1
Wrist Strap x1
USB Cable x1
HDMI Cable x1
Quick Start Guide x1
User Manual x1
Product CD x1
Accessories List Card x1
CTP Gloves Set x1
TF Card (16GB x1
Charging Dock (only for TT384A) x1
Tripod Mount (only for TT384A) x1
Oponal accessories
Li-ion Baery
Camera Pouch
Sunshade
Charging Dock
Tripod Mount
Bluetooth Headset (only for D384A)
Shipping Dimensions: 470mm×360mm×210mm
D Series Intelligent Thermographic IR Camera
4 / 8www.guideir.com
Copyright
© 2017, Wuhan Guide
Sensmart Tech Co., Ltd.
Shipping content
Infrared camera with lens
Standard accessories
Li-ion Battery ×2
Power Adapter ×1
Adapter Plug ×1
Wrist Strap ×1
USB Cable ×1
HDMI Cable ×1
Quick Start Guide ×1
User Manual ×1
Product CD ×1
Accessories List Card ×1
CTP Gloves Set ×1
TF Card（16GB）×1
Charging Dock(only for D384A) ×1
Tripod Mount (only for D384A) ×1
Optional accessories
Li-ion Battery
Camera Pouch
Sunshade
Charging Dock
Tripod Mount
Bluetooth Headset (only for D384A)
Shipping
Dimensions
470mm×360mm×210mm
Pictures of Contents
Infrared camera with lens
Power Adapter
Adapter Plugs
D Series Intelligent Thermographic IR Camera
4 / 8www.guideir.com
Copyright
© 2017, Wuhan Guide
Sensmart Tech Co., Ltd.
Shipping content
Infrared camera with lens
Standard accessories
Li-ion Battery ×2
Power Adapter ×1
Adapter Plug ×1
Wrist Strap ×1
USB Cable ×1
HDMI Cable ×1
Quick Start Guide ×1
User Manual ×1
Product CD ×1
Accessories List Card ×1
CTP Gloves Set ×1
TF Card（16GB）×1
Charging Dock(only for D384A) ×1
Tripod Mount (only for D384A) ×1
Optional accessories
Li-ion Battery
Camera Pouch
Sunshade
Charging Dock
Tripod Mount
Bluetooth Headset (only for D384A)
Shipping
Dimensions
470mm×360mm×210mm
Pictures of Contents
Infrared camera with lens
Power Adapter
Adapter Plugs
D Series Intelligent Thermographic IR Camera
4 / 8www.guideir.com
Copyright
© 2017, Wuhan Guide
Sensmart Tech Co., Ltd.
Shipping content
Infrared camera with lens
Standard accessories
Li-ion Battery ×2
Power Adapter ×1
Adapter Plug ×1
Wrist Strap ×1
USB Cable ×1
HDMI Cable ×1
Quick Start Guide ×1
User Manual ×1
Product CD ×1
Accessories List Card ×1
CTP Gloves Set ×1
TF Card（16GB）×1
Charging Dock(only for D384A) ×1
Tripod Mount (only for D384A) ×1
Optional accessories
Li-ion Battery
Camera Pouch
Sunshade
Charging Dock
Tripod Mount
Bluetooth Headset (only for D384A)
Shipping
Dimensions
470mm×360mm×210mm
Pictures of Contents
Infrared camera with lens
Power Adapter
Adapter Plugs
Infrared Camera with lens
Adapter Plugs
Adapter Plugs
Product Cd
Power Adapter
HDMI Cable (2m)
USB Cable (2m)
Li-ion Baery
TF Card
User Manual
D Series Intelligent Thermographic IR Camera
5 / 8www.guideir.com
Copyright
© 2017, Wuhan Guide
Sensmart Tech Co., Ltd.
Li-ion Battery
HDMI Cable (2m)
USB Cable (2m)
Wrist Strap
CTP Glove Set
TF Card(16G)
User Manual
Quick Start Guide
Accessories List Card
Product CD
Camera Pouch
Charging Dock
Sunshade
Bluetooth Headset
D Series Intelligent Thermographic IR Camera
5 / 8www.guideir.com
Copyright
© 2017, Wuhan Guide
Sensmart Tech Co., Ltd.
Li-ion Battery
HDMI Cable (2m)
USB Cable (2m)
Wrist Strap
CTP Glove Set
TF Card(16G)
User Manual
Quick Start Guide
Accessories List Card
Product CD
Camera Pouch
Charging Dock
Sunshade
Bluetooth Headset
D Series Intelligent Thermographic IR Camera
5 / 8www.guideir.com
Copyright
© 2017, Wuhan Guide
Sensmart Tech Co., Ltd.
Li-ion Battery
HDMI Cable (2m)
USB Cable (2m)
Wrist Strap
CTP Glove Set
TF Card(16G)
User Manual
Quick Start Guide
Accessories List Card
Product CD
Camera Pouch
Charging Dock
Sunshade
Bluetooth Headset
D Series Intelligent Thermographic IR Camera
5 / 8www.guideir.com
Copyright
© 2017, Wuhan Guide
Sensmart Tech Co., Ltd.
Li-ion Battery
HDMI Cable (2m)
USB Cable (2m)
Wrist Strap
CTP Glove Set
TF Card(16G)
User Manual
Quick Start Guide
Accessories List Card
Product CD
Camera Pouch
Charging Dock
Sunshade
Bluetooth Headset
D Series Intelligent Thermographic IR Camera
5 / 8www.guideir.com
Copyright
© 2017, Wuhan Guide
Sensmart Tech Co., Ltd.
Li-ion Battery
HDMI Cable (2m)
USB Cable (2m)
Wrist Strap
CTP Glove Set
TF Card(16G)
User Manual
Quick Start Guide
Accessories List Card
Product CD
Camera Pouch
Charging Dock
Sunshade
Bluetooth Headset
D Series Intelligent Thermographic IR Camera
5 / 8www.guideir.com
Copyright
© 2017, Wuhan Guide
Sensmart Tech Co., Ltd.
Li-ion Battery
HDMI Cable (2m)
USB Cable (2m)
Wrist Strap
CTP Glove Set
TF Card(16G)
User Manual
Quick Start Guide
Accessories List Card
Product CD
Camera Pouch
Charging Dock
Sunshade
Bluetooth Headset
D Series Intelligent Thermographic IR Camera
5 / 8www.guideir.com
Copyright
© 2017, Wuhan Guide
Sensmart Tech Co., Ltd.
Li-ion Battery
HDMI Cable (2m)
USB Cable (2m)
Wrist Strap
CTP Glove Set
TF Card(16G)
User Manual
Quick Start Guide
Accessories List Card
Product CD
Camera Pouch
Charging Dock
Sunshade
Bluetooth Headset
USER MANUAL

Chapter 2
List of Product Components

List of Product Components 2
4 5User Manual User Manual
1 Illuminating light 8 Battery release key
2 Laser 9 Micro USB terminal
3 Visible light 10 TF card slot
4 Quick lens release key 11 Micro HDMI output terminal
5 Lens 12 Power supply terminal
6 Wrist belt buckle 13 Indicator light
7 Shooting key
1 Launch button 4 Return key
2 Loudspeaker 5 Microphone
3 LCD display screen 6 Battery lock
List of Product Components List of Product Components

List of Product Components 2
4 5User Manual User Manual
1 Illuminating light 8 Battery release key
2 Laser 9 Micro USB terminal
3 Visible light 10 TF card slot
4 Quick lens release key 11 Micro HDMI output terminal
5 Lens 12 Power supply terminal
6 Wrist belt buckle 13 Indicator light
7 Shooting key
1 Launch button 4 Return key
2 Loudspeaker 5 Microphone
3 LCD display screen 6 Battery lock
List of Product Components List of Product Components

Chapter 3
A Glance at the Functional Areas
of the Device
Instrucon to each funconal area
Gallery
Short-cut menu

A Glance at Functional Areas of the Device 3
8 9User Manual User Manual
A. Instruction to each functional area: B. Gallery:
1Display area 4Gallery 7Enter real-time
editing
2Control area 5System settings 8Palette
3Central point
cursor 6Short-cut menu
button 9
Status identication
area
1. Tap the [Gallery] button in the lower part of the main interface to enter the
picture browsing interface and then double-tap any shot picture to view it.
2. Tap the [Edit] button at the bottom to enter the analysis object editing areas.
When the temperature measurement image is modied, the system will pop
out a dialog box on the interface to prompt “Save modications or not” before
exiting the interface, and then tap [Save] button to save modications.
A Glance at Functional Areas of the Device A Glance at Functional Areas of the Device
A. Instruction to each functional area

A Glance at Functional Areas of the Device 3
8 9User Manual User Manual
A. Instruction to each functional area: B. Gallery:
1Display area 4Gallery 7Enter real-time
editing
2Control area 5System settings 8Palette
3Central point
cursor 6Short-cut menu
button 9Status identication
area
1. Tap the [Gallery] button in the lower part of the main interface to enter the
picture browsing interface and then double-tap any shot picture to view it.
2. Tap the [Edit] button at the bottom to enter the analysis object editing areas.
When the temperature measurement image is modied, the system will pop
out a dialog box on the interface to prompt “Save modications or not” before
exiting the interface, and then tap [Save] button to save modications.
A Glance at Functional Areas of the Device A Glance at Functional Areas of the Device
B. Gallery
1. Tap the [Gallery] buon in the lower part of the main interface to enter the
picture browsing interface and then double-tap any shot picture to view it.
2. Tap the [Edit] buon at the boom to enter the analysis object eding areas.
When the temperature measurement image is modied, the system will pop
out a dialog box on the interface to prompt “Save modicaons or not” before
exing the interface, and then tap [Save] buon to save modicaons.
8 9User Manual User Manual
A. Instruction to each functional area: B. Gallery:
1Display area 4Gallery 7Enter real-time
editing
2Control area 5System settings 8Palette
3Central point
cursor 6Short-cut menu
button 9Status identication
area
1. Tap the [Gallery] button in the lower part of the main interface to enter the
picture browsing interface and then double-tap any shot picture to view it.
2. Tap the [Edit] button at the bottom to enter the analysis object editing areas.
When the temperature measurement image is modied, the system will pop
out a dialog box on the interface to prompt “Save modications or not” before
exiting the interface, and then tap [Save] button to save modications.
A Glance at Functional Areas of the Device A Glance at Functional Areas of the Device

A Glance at Functional Areas of the Device 3
C. Short-cut menu
This interface displays some short-cut operaons that can be conducted to
realme images, mainly including IR mode switch, camera, mode switch,
illuminang light switch, laser switch, wireless AP hotspot switch, etc.
How to enter the short-cut menu (See image 1)
1. In the real-me image, slide the short-cut icon [—] at the boom of the
interface upward, and then the system will pop up a short-cut menu interface.
2. The short-cut menu includes the following contents:
Camera mode: mainly used for control of real-me images and real-me
recording.
IR mode: Mainly used for control of the switch among IR mode, visible light
mode, fusion mode and PIP mode.
Illuminang light: mainly used for control of the start-up and shutdown of
illuminang light module.
Laser: mainly used for control of the start-up and shutdown of laser module.
Hotspot: mainly used for control of startup and shutdown of wireless AP.
Shuer compensaon: double-tap real-me images, and then the system will
conduct automac shuer compensaon and pop up a prompt message.
(See image 1)
E-zoom: 4x.
USB real-me video: Start up and shut down the USB real-me video connecon.
10 11User Manual User Manual
1. In the real-time image, slide the short-cut icon [—] at the bottom of the
interface upward, and then the system will pop up a short-cut menu interface.
2. The short-cut menu includes the following contents:
Camera mode: mainly used for control of real-time images and real-time recording.
IR mode: Mainly used for control of the switch among IR mode, visible light mode,
fusion mode and PIP mode.
Illuminating light: mainly used for control of the start-up and shutdown of
illuminating light module.
Laser: mainly used for control of the start-up and shutdown of laser module.
Hotspot: mainly used for control of startup and shutdown of wireless AP.
Shutter compensation: double-tap real-time images, and then the system will
conduct automatic shutter compensation and pop up a prompt message.
E-zoom: 4x.
USB real-time video: Start up and shut down the USB real-time video connection.
How to enter the short-cut menu
C. Short-cut menu:
This interface displays some short-cut operations that can be conducted to real-
time images, mainly including IR mode switch, camera, mode switch, illuminating
light switch, laser switch, wireless AP hotspot switch, etc.
A Glance at Functional Areas of the Device A Glance at Functional Areas of the Device
10 11User Manual User Manual
1. In the real-time image, slide the short-cut icon [—] at the bottom of the
interface upward, and then the system will pop up a short-cut menu interface.
2. The short-cut menu includes the following contents:
Camera mode: mainly used for control of real-time images and real-time recording.
IR mode: Mainly used for control of the switch among IR mode, visible light mode,
fusion mode and PIP mode.
Illuminating light: mainly used for control of the start-up and shutdown of
illuminating light module.
Laser: mainly used for control of the start-up and shutdown of laser module.
Hotspot: mainly used for control of startup and shutdown of wireless AP.
Shutter compensation: double-tap real-time images, and then the system will
conduct automatic shutter compensation and pop up a prompt message.
E-zoom: 4x.
USB real-time video: Start up and shut down the USB real-time video connection.
How to enter the short-cut menu
C. Short-cut menu:
This interface displays some short-cut operations that can be conducted to real-
time images, mainly including IR mode switch, camera, mode switch, illuminating
light switch, laser switch, wireless AP hotspot switch, etc.
A Glance at Functional Areas of the Device A Glance at Functional Areas of the Device
10 11User Manual User Manual
1. In the real-time image, slide the short-cut icon [—] at the bottom of the
interface upward, and then the system will pop up a short-cut menu interface.
2. The short-cut menu includes the following contents:
Camera mode: mainly used for control of real-time images and real-time recording.
IR mode: Mainly used for control of the switch among IR mode, visible light mode,
fusion mode and PIP mode.
Illuminating light: mainly used for control of the start-up and shutdown of
illuminating light module.
Laser: mainly used for control of the start-up and shutdown of laser module.
Hotspot: mainly used for control of startup and shutdown of wireless AP.
Shutter compensation: double-tap real-time images, and then the system will
conduct automatic shutter compensation and pop up a prompt message.
E-zoom: 4x.
USB real-time video: Start up and shut down the USB real-time video connection.
How to enter the short-cut menu
C. Short-cut menu:
This interface displays some short-cut operations that can be conducted to real-
time images, mainly including IR mode switch, camera, mode switch, illuminating
light switch, laser switch, wireless AP hotspot switch, etc.
A Glance at Functional Areas of the Device A Glance at Functional Areas of the Device
Image 1 Image 2

Chapter 4
Observation
Image mode switch
Temperature measurement
E-zoom

Observation 4
Image mode switch
Enter the real-me video, and tap IR mode in the short-cut menu mulple
messo as to conduct mul-mode switch operaons to the current image.
Images can be switched among the following four modes:
14 15User Manual User Manual
Observation Observation
A. PIP
C. Visible light
B. Fusion
D. IR
1. In the real-time image, tap the short-cut menu [X] at the most right bottom
of the screen.
2. Tap the materials setting button in the parameters menu, choose the emissivity
of measured object and then double-tap the blank place on the screen to return
the real-time interface.
Image mode switch Temperature measurement
Enter the real-time video, and tap IR mode in the short-cut menu multiple times
so as to conduct multi-mode switch operations to the current image.
Images can be switched among the following four modes:

Observation 4
Temperature measurement
1. In the real-me image, tap the short-cut menu [X] at the most right boom
of the screen.
2. Tap the materials seng buon in the parameters menu, choose the
emissivity of measured object and then double-tap the blank place on the
screen to return the real-me interface.
14 15User Manual User Manual
Observation Observation
A. PIP
C. Visible light
B. Fusion
D. IR
1. In the real-time image, tap the short-cut menu [X] at the most right bottom
of the screen.
2. Tap the materials setting button in the parameters menu, choose the emissivity
of measured object and then double-tap the blank place on the screen to return
the real-time interface.
Image mode switch Temperature measurement
Enter the real-time video, and tap IR mode in the short-cut menu multiple times
so as to conduct multi-mode switch operations to the current image.
Images can be switched among the following four modes:
14 15User Manual User Manual
Observation Observation
A. PIP
C. Visible light
B. Fusion
D. IR
1. In the real-time image, tap the short-cut menu [X] at the most right bottom
of the screen.
2. Tap the materials setting button in the parameters menu, choose the emissivity
of measured object and then double-tap the blank place on the screen to return
the real-time interface.
Image mode switch Temperature measurement
Enter the real-time video, and tap IR mode in the short-cut menu multiple times
so as to conduct multi-mode switch operations to the current image.
Images can be switched among the following four modes:

Observation 4
Temperature measurement
3. Align the central point cursor with the measured object for temperature
measurement. Rotate the outer lens clockwise or anclockwise to adjust the
focal length.
E-zoom
In the real-me image, tap the buon [ ] at the boom to call out the
short-cutmenu, and then slide backwards to the E-zoom opon to enable it
so that the real-me image can be zoomed 4 mes by sliding the status bar
towards le and right.
16 User Manual
3. Align the central point cursor with the measured object for temperature
measurement. Rotate the outer lens clockwise or anticlockwise to adjust the
focal length.
E-zoom
In the real-time image, tap the button [ ] at the bottom to call out the short-cut
menu, and then slide backwards to the E-zoom option [ ] to enable it so that
the real-time image can be zoomed 4 times by sliding the status bar towards
left and right.
Picture shooting
Video recording
Real-time analysis
File browsing
Picture analysis
Isotherm
Customizable emissivity
Chapter 5
Shooting
Observation
16 User Manual
3. Align the central point cursor with the measured object for temperature
measurement. Rotate the outer lens clockwise or anticlockwise to adjust the
focal length.
E-zoom
In the real-time image, tap the button [ ] at the bottom to call out the short-cut
menu, and then slide backwards to the E-zoom option [ ] to enable it so that
the real-time image can be zoomed 4 times by sliding the status bar towards
left and right.
Picture shooting
Video recording
Real-time analysis
File browsing
Picture analysis
Isotherm
Customizable emissivity
Chapter 5
Shooting
Observation