Tuscany BROOKSVILLE 6736045 User manual

Have a question? DON’T GO BACK TO THE STORE, WE CAN HELP,
just call 1-800-626-3525 ,8 a.m. to 5 p.m. EST Monday-Friday.
Have a question? DON’T GO BACK TO THE STORE, WE CAN HELP,
just call 1-800-626-3525 ,8 a.m. to 5 p.m. EST Monday-Friday.
Have a question? DON’T GO BACK TO THE STORE, WE CAN HELP,
just call 1-800-626-3525 ,8 a.m. to 5 p.m. EST Monday-Friday.
Do not remove the customer service
tag with the model number and phone number as
this will be helpful if you need assistance in
the future.
Please Note:
6736048
supplies
the
the
28
29
28
Wrench
Hex Wrench
29
Spray Hose
30
30
Metal Washer
31
Washer
31
Aerator Collar
Aerator Core
Aerator Washer
32
Aerator Assembly32
Mounting Post
1-4
28
31
(#28) to unscrew nuts (#21) and washers (#31) from
underneath to remove the deck plate (#20).
wrench
4.
Place silicone sealant beneath the faucet base (#15)
and install the faucet through the single faucet hole.

Have a question? DON’T GO BACK TO THE STORE, WE CAN HELP,
just call 1-800-626-3525 ,8 a.m. to 5 p.m. EST Monday-Friday.
Have a question? DON’T GO BACK TO THE STORE, WE CAN HELP,
just call 1-800-626-3525 ,8 a.m. to 5 p.m. EST Monday-Friday.
Have a question? DON’T GO BACK TO THE STORE, WE CAN HELP,
just call 1-800-626-3525 ,8 a.m. to 5 p.m. EST Monday-Friday.
Do not remove the customer service
tag with the model number and phone number as
this will be helpful if you need assistance in
the future.
Please Note:
6736048
supplies
the
the
28
29
28
Wrench
Hex Wrench
29
Spray Hose
30
30
Metal Washer
31
Washer
31
Aerator Collar
Aerator Core
Aerator Washer
32
Aerator Assembly32
Mounting Post
1-4
28
31
(#28) to unscrew nuts (#21) and washers (#31) from
underneath to remove the deck plate (#20).
wrench
4.
Place silicone sealant beneath the faucet base (#15)
and install the faucet through the single faucet hole.

Have a question? DON’T GO BACK TO THE STORE, WE CAN HELP,
just call 1-800-626-3525 ,8 a.m. to 5 p.m. EST Monday-Friday.
Have a question? DON’T GO BACK TO THE STORE, WE CAN HELP,
just call 1-800-626-3525 ,8 a.m. to 5 p.m. EST Monday-Friday.
Have a question? DON’T GO BACK TO THE STORE, WE CAN HELP,
just call 1-800-626-3525 ,8 a.m. to 5 p.m. EST Monday-Friday.
Do not remove the customer service
tag with the model number and phone number as
this will be helpful if you need assistance in
the future.
Please Note:
6736048
supplies
the
the
28
29
28
Wrench
Hex Wrench
29
Spray Hose
30
30
Metal Washer
31
Washer
31
Aerator Collar
Aerator Core
Aerator Washer
32
Aerator Assembly32
Mounting Post
1-4
28
31
(#28) to unscrew nuts (#21) and washers (#31) from
underneath to remove the deck plate (#20).
wrench
4.
Place silicone sealant beneath the faucet base (#15)
and install the faucet through the single faucet hole.

Have a question? DON’T GO BACK TO THE STORE, WE CAN HELP,
just call 1-800-626-3525 ,8 a.m. to 5 p.m. EST Monday-Friday.
Have a question? DON’T GO BACK TO THE STORE, WE CAN HELP,
just call 1-800-626-3525 ,8 a.m. to 5 p.m. EST Monday-Friday.
Have a question? DON’T GO BACK TO THE STORE, WE CAN HELP,
just call 1-800-626-3525 ,8 a.m. to 5 p.m. EST Monday-Friday.
Do not use pliers to remove the
aerator as they might damage it. Remove by
hand.
Please Note:
After installing the faucet, remove the aerator
assembly (#32).
care
r
32
Using supplied wrench (#28), attach metal
washer (#23) and nuts (#24) on mounting
post (#13),
5.
6.
8.
9.
10.
Step 5-8 Step 9-12
13
Remove handle (#1) and cartridge
(#6) to check if ceramic disk is
damaged permanently or dirty.
Re-install the cartridge (#6) or
replace the cartridge (#6). Check
the rubber o-ring to make sure it is
seated properly in the cartridge (#6).
If not reposition the o-ring and reseat
the cartridge (#6).
Lock nut (#5) lock nut (#5).
(#6).
Aerator core (#18) is dirty or misfitted.
Unscrew aerator collar (#19) to check
rubber packing or replace the
aerator core (#18).
(Hint - This is easier to apply Teflon tape before
installation)
(#25)
popping
(#30)
(#14)
assembly
spray
. See diagram for visual.
A
30
14
25
side spray
7.
Check for leaks
Turn on the hot and cold water shut offs. Check
for leaks. (If there are leaks, please refer to
Step 8 or 9)
Turn on the faucet handle for one minute to
flush the debris from the faucet. Turn off
the faucet and re-assemble the aerator.
11.
12.

Have a question? DON’T GO BACK TO THE STORE, WE CAN HELP,
just call 1-800-626-3525 ,8 a.m. to 5 p.m. EST Monday-Friday.
Have a question? DON’T GO BACK TO THE STORE, WE CAN HELP,
just call 1-800-626-3525 ,8 a.m. to 5 p.m. EST Monday-Friday.
Have a question? DON’T GO BACK TO THE STORE, WE CAN HELP,
just call 1-800-626-3525 ,8 a.m. to 5 p.m. EST Monday-Friday.
Do not use pliers to remove the
aerator as they might damage it. Remove by
hand.
Please Note:
After installing the faucet, remove the aerator
assembly (#32).
care
r
32
Using supplied wrench (#28), attach metal
washer (#23) and nuts (#24) on mounting
post (#13),
5.
6.
8.
9.
10.
Step 5-8 Step 9-12
13
Remove handle (#1) and cartridge
(#6) to check if ceramic disk is
damaged permanently or dirty.
Re-install the cartridge (#6) or
replace the cartridge (#6). Check
the rubber o-ring to make sure it is
seated properly in the cartridge (#6).
If not reposition the o-ring and reseat
the cartridge (#6).
Lock nut (#5) lock nut (#5).
(#6).
Aerator core (#18) is dirty or misfitted.
Unscrew aerator collar (#19) to check
rubber packing or replace the
aerator core (#18).
(Hint - This is easier to apply Teflon tape before
installation)
(#25)
popping
(#30)
(#14)
assembly
spray
. See diagram for visual.
A
30
14
25
side spray
7.
Check for leaks
Turn on the hot and cold water shut offs. Check
for leaks. (If there are leaks, please refer to
Step 8 or 9)
Turn on the faucet handle for one minute to
flush the debris from the faucet. Turn off
the faucet and re-assemble the aerator.
11.
12.

Have a question? DON’T GO BACK TO THE STORE, WE CAN HELP,
just call 1-800-626-3525 ,8 a.m. to 5 p.m. EST Monday-Friday.
Have a question? DON’T GO BACK TO THE STORE, WE CAN HELP,
just call 1-800-626-3525 ,8 a.m. to 5 p.m. EST Monday-Friday.
Have a question? DON’T GO BACK TO THE STORE, WE CAN HELP,
just call 1-800-626-3525 ,8 a.m. to 5 p.m. EST Monday-Friday.
Do not use pliers to remove the
aerator as they might damage it. Remove by
hand.
Please Note:
After installing the faucet, remove the aerator
assembly (#32).
care
r
32
Using supplied wrench (#28), attach metal
washer (#23) and nuts (#24) on mounting
post (#13),
5.
6.
8.
9.
10.
Step 5-8 Step 9-12
13
Remove handle (#1) and cartridge
(#6) to check if ceramic disk is
damaged permanently or dirty.
Re-install the cartridge (#6) or
replace the cartridge (#6). Check
the rubber o-ring to make sure it is
seated properly in the cartridge (#6).
If not reposition the o-ring and reseat
the cartridge (#6).
Lock nut (#5) lock nut (#5).
(#6).
Aerator core (#18) is dirty or misfitted.
Unscrew aerator collar (#19) to check
rubber packing or replace the
aerator core (#18).
(Hint - This is easier to apply Teflon tape before
installation)
(#25)
popping
(#30)
(#14)
assembly
spray
. See diagram for visual.
A
30
14
25
side spray
7.
Check for leaks
Turn on the hot and cold water shut offs. Check
for leaks. (If there are leaks, please refer to
Step 8 or 9)
Turn on the faucet handle for one minute to
flush the debris from the faucet. Turn off
the faucet and re-assemble the aerator.
11.
12.