6Manual Ref: XHD-TVI-02
Traditional Camera (Code: SEE250/250L)
1 3
2 4
1. DAMPING-
2. DAMPING+
3. DRIVE
4. GND
Auto-Iris Direct Drive Connections
Auto Iris type lenses require the 4-pin connector to be attached
to the camera. In most instances your lens will be pre-wired with
this plug, but if needed on-line
Tip 322
which includes a full wiring
diagram can be found at
www.tvision.technology
.
C Or CS Mount Lenses
Most lenses are available in 2 dierent mounting options - C mount
and CS mount.
CS mount lenses are now the most popular size as they are shorter
and more compact than C mount lenses. Most cameras are now
manufactured to accept CS mount lenses. Before tting the lens you
need to verify that you are using a CS mount lens with the camera.
You can conrm this with your lens supplier or the literature that
came with your lens, check the instructions or packaging to see if
your lens is a C or a CS mount version.
If your lens is a C mount type you can still t it to the camera using a
C to CS adapter. See the on-line Tip 323 at www.tvision.technology.
Using A CS Mount Lens
If you are using a standard CS mount lens you can screw the lens
straight into the camera without the need for C-CS adapter ring.
To produce a true HD image TVI cameras require a Mega Pixel
lens. Standard lenses are not produced to a high enough quality.
Note
