TVT TD-A510-MTC-E User manual

NVMS-5000
NVMS Management Server
User Manual

NVMS User Manual
2
Notes
Please read this user manual carefully to ensure that you can use the device correctly and safely.
There may be several technically incorrect places or printing errors in this manual. The updates will be added
into the new version of this manual. The contents of this manual are subject to change without notice.
This device should be operated only from the type of power source indicated on the marking label. The
voltage of the power must be verified before using the same. Kindly remove the cables from the power source if
the device is not to be used for a long period of time.
Do not place this device near any heat sources such as radiators, heat registers, stoves or other devices that
produce heat.
Do not place this device near water. Clean only with a dry cloth.
Do not block any ventilation openings and ensure proper ventilation around the machine.
Do not power off the device at normal recording condition.
This machine is for indoor use only. Do not expose the machine in rain or moist environment. In case any
solid or liquid get inside the machine’s case, please turn off the device immediately and get it checked by a
qualified technician.
Do not try to repair the device by yourself without technical aid or approval.
When this product is in use, the relevant contents of Microsoft,Apple and Google will be involved in. The
pictures and screenshots in this manual are only used to explain the usage of our product. The ownerships of
trademarks, logos and other intellectual properties related to Microsoft,Apple and Google shall belong to the
above-mentioned companies.
All examples and pictures used in the manual are from one of the models for reference purpose.
Disclaimer
With regard to the product with internet access, the use of product shall be wholly at your own risks. Our
company shall be irresponsible for abnormal operation, privacy leakage or other damages resulting from cyber
attack, hacker attack, virus inspection, or other internet security risks; however, our company will provide timely
technical support if necessary.
Surveillance laws vary from country to country. Check all laws in your local region before using this product
for surveillance purposes. We shall not take the responsibility for any consequences resulting from illegal
operations.
The storage period of the personal data depends on the capacity of the storage devices the users use and all
data stored in the device shall be handled by themselves. Our company shall not be responsible for the data loss.
Cyber Security Recommendations
Change passwords and use strong passwords.At least 8 characters or a combination of characters, numbers,
and upper and lower case letters should be used in your password.
Regularly change the passwords of your devices to ensure that only authorized users can access the system.
Change default ports (like HTTP, data port) to reduce the risk of outsiders being able to access.
It is recommended to set the firewall of your router. But note that some important ports cannot be closed (like
80, 6036).

NVMS User Manual
3
Regulatory Information
FCC Marking
The products have be tested and found in compliance with the council FCC rules and regulations part 15
subpart B. Operation of this product is subject the following two conditions: (1) this device may not cause
harmful interface, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
CE Marking
The products have been manufactured to comply with the following directives.
EMC Directive 2014/30/EU
RoHS Marking
The products have designed and manufactured in accordance with Directive EU RoHS Directive 2011/65/EU and
its amendment Directive EU 2015/863 on the restriction of the use of certain hazardous substances in electrical
and electronic equipment.

NVMS User Manual
Contents
1Introduction...................................................................................................................................................1
1.1 Introduction .......................................................................................................................................................1
1.1.1 Summary.................................................................................................................................................1
1.1.2 Features...................................................................................................................................................1
1.1.3 Interfaces and Indicators.........................................................................................................................1
1.2 Rear Panel Instructions......................................................................................................................................2
2Login ..............................................................................................................................................................3
2.1 Login..................................................................................................................................................................3
2.2 Main Menu Interface Introduction.....................................................................................................................3
3Device Management......................................................................................................................................5
3.1 Add Encoding Device........................................................................................................................................5
3.1.1 QuicklyAdd............................................................................................................................................5
3.1.2 ManuallyAdd..........................................................................................................................................5
3.1.3 Initiatively Report...................................................................................................................................6
3.2 Modify or Delete Device ...................................................................................................................................6
3.3 Device Setting....................................................................................................................................................7
3.4 Area Setting.......................................................................................................................................................7
3.5 Channel Group Setting ......................................................................................................................................7
3.6 Add Media Transfer Server ...............................................................................................................................8
3.7 Add Storage Server............................................................................................................................................8
4Live View......................................................................................................................................................10
4.1 Live View.........................................................................................................................................................10
4.1.1 View Mode Setting ...............................................................................................................................11
4.1.2 Monitoring Point View..........................................................................................................................11
4.1.3 Channel Group View.............................................................................................................................12
4.1.4 Plan View..............................................................................................................................................13
4.2 View Control....................................................................................................................................................13
4.3 Snapshot...........................................................................................................................................................14
4.4 Multi-Screen View...........................................................................................................................................14
4.5 Talkback...........................................................................................................................................................15
5Record & Playback.....................................................................................................................................16
5.1 Record Configuration ......................................................................................................................................16
5.1.1 Manual Recording.................................................................................................................................16
5.1.2 Schedule Recording..............................................................................................................................16
5.1.3 Alarm Linkage Recording.....................................................................................................................17
5.2 Record Playback..............................................................................................................................................17
5.2.1 Instant Playback....................................................................................................................................19
5.2.2 Synchronous Playback..........................................................................................................................20
5.2.3 Asynchronous Playback........................................................................................................................20
5.2.4 Playback by Time Slice.........................................................................................................................20
5.2.5 Playback by Event.................................................................................................................................22
5.2.6 Playback by Tag....................................................................................................................................23
5.3 Backup.............................................................................................................................................................23
6Alarm Management....................................................................................................................................25
6.1 Alarm Server Configuration ............................................................................................................................25
6.1.1 View Alarm Server Status.....................................................................................................................25
6.1.2 Alarm Configuration.............................................................................................................................25

NVMS User Manual
6.1.3 Alarm View...........................................................................................................................................26
6.1.4 Alarm Log Query..................................................................................................................................27
6.2 Alarm System..................................................................................................................................................28
6.2.1 Add Alarm Host....................................................................................................................................28
6.2.2 Configure Subsystem............................................................................................................................29
6.2.3 Zone......................................................................................................................................................29
6.2.4 Alarm Linkage......................................................................................................................................29
7E-Map ..........................................................................................................................................................31
7.1 E-Map Settings................................................................................................................................................31
7.1.1 Create E-Map........................................................................................................................................31
7.1.2 Add Hotspot..........................................................................................................................................31
7.1.3 E-Map Monitoring................................................................................................................................31
8TV Wall........................................................................................................................................................33
8.1 Add TV Wall Server ........................................................................................................................................33
8.2 Add Decoder....................................................................................................................................................33
8.2.1 Create and Connect Decoder.................................................................................................................33
8.3 TV Wall Management......................................................................................................................................34
8.3.1 Configure TV Wall................................................................................................................................34
8.3.2 TV Wall View........................................................................................................................................38
8.3.3 Decoder Input........................................................................................................................................45
8.3.4 Playback................................................................................................................................................45
8.3.5 Task Configuration of TV Wall.............................................................................................................47
8.3.6 TV Wall System Configuration.............................................................................................................48
9Account and Permission.............................................................................................................................49
9.1 Create Account ................................................................................................................................................49
9.2 User Permission Settings.................................................................................................................................49
10 Operation and Maintenance Management...............................................................................................51
10.1 Check and Export Log.....................................................................................................................................51
11 Local Configuration....................................................................................................................................52
11.1.1 System Startup and Maintenance..........................................................................................................52
11.1.2 Overload Settings..................................................................................................................................52
11.1.3 Alarm View Settings.............................................................................................................................52
11.1.4 Network Settings...................................................................................................................................52
11.1.5 Server Port Settings...............................................................................................................................53
11.1.6 System Time Settings............................................................................................................................53
12 Intelligent Management..............................................................................................................................54
12.1 People Counting ..............................................................................................................................................54
12.1.1 Task Management.................................................................................................................................54
12.1.2 Real-time Statistics ...............................................................................................................................54
12.1.3 Summary Statistics................................................................................................................................55
12.1.4 Historical Statistics ...............................................................................................................................56
12.2 Access Control Management...........................................................................................................................56
12.2.1 Remotely Open the Door......................................................................................................................57
12.2.2 Alarm Linkage......................................................................................................................................58
12.2.3 Log Query.............................................................................................................................................58
12.2.4 E-Map ACS...........................................................................................................................................58
12.3 Attendance Management.................................................................................................................................59
12.3.1 Alarm Linkage......................................................................................................................................59
12.3.2 Log Query.............................................................................................................................................59

NVMS User Manual
13 Web Client...................................................................................................................................................61
13.1 Operating Environment of Web Client ............................................................................................................61
13.2 Start IE Client..................................................................................................................................................61
14 Troubleshooting...........................................................................................................................................63
15 Specifications...............................................................................................................................................65

NVMS User Manual
1
1.1 Introduction
1.1.1 Summary
Based on the conception of “All-in-One”, the management server is a server specially designed for security surveillance application. Its
software is installed before delivery, combined the video stream replication and distribution. Due to its low cost, simple deployment,
flexible expansion, powerful performance, user-friendly interface design, good compatibility and high reliability, it can meet the
requirements of various large and medium sized video surveillance systems.
1.1.2 Features
High-performance X86 hardware platform, stable and reliable
Preset software before delivery; All-in-One simple deployment
Support the device access of TVT and other famous manufacturers in the industry;
Support ONVIF protocol
Support device auto-report
Support adding devices through IP address, IP address segment, domain name and serial number
Automatically search devices and quickly adding devices
Support standard, widescreen and customized screen display modes
Support instant playback and alarm preview
Support corridor mode
Support fisheye mode
Support PTZ direction control and focus control; support setting and calling preset and cruise
Support listen, two-way talk and broadcast
Support record search, playback and downloading from device and control center
Support record search and playback by time, channel, event and tag
Support time-slice playback
Support record clip and backup; Support backup by time and event
Support video search, playback and downloading from SD card of the IPC
Support multi-level images and online E-map
Support TV wall management, including splicing, PIP, roaming and triggering video on TV wall
Support auto-switch plan and camera group on TV wall
Support various alarm types and alarm linkages
Support multi-level, multi-area and multi-user permission management
Support log management, including notices and alarms of device’s online and offline status
Support overload protection of the client
SDK/OCX available for client’s secondary development
Support GB/T 28181-2011, DB31/T 889-2015 and DB33/T 629-2011 protocols
Support alarm host, access control system/ attendance system, dynamic environment surveillance system as well as one-button alarm
system access
Support Android/iOS mobile APP
1.1.3 Interfaces and Indicators
The icons below are for reference only. Please refer to the interfaces and indicators of the real server.
1 Introduction

NVMS User Manual
2
Icon
Description
Icon
Description
Power Key
System disk running indicator; flashing light
indicators the disk works normally.
//
Reset
Power indicator
USB interface
Network connection indicator. Green light
indicators the network connection is normal.
1.2 Rear Panel Instructions
No.
Description
No.
Description
1
Mouse or keyboard port
9
Central bass（orange）
2
VGA port
10
Rear speaker（black）
3
DVI port
11
Optical SPIDF out port
4
HDMI port
12
Audio input（light blue）
5
LAN RJ-45 port（LAN1）
13
Front speaker（Lime）
6
USB3.0 ports（1~2）
14
Microphone（Pink）
7
LAN RJ-45 port（LAN2）
15
LAN RJ-45 port（LAN3）
8
USB3.0 ports（3~4）
16
LAN RJ-45 port（LAN4）
1
Mouse or keyboard port
9
Central bass（orange）

NVMS User Manual
3
2 Login
2.1 Login
Before starting, please make sure network cable, monitor and power are connected. After the server is started, the following window will
appear as shown below.
①Enter username and password (the default username is admin; the default password is 123456).
②Check “Remember Password” or “Auto Login” as needed.
③Click [Login].
If you forget the password, please click “Forgotten password”. Then a small window will appear. You can get the IP address of the
authentication server, the config server port and the encrypted password in this interface. After that, send these information to the technical
supporter to obtain the original password.
2.2 Main Menu Interface Introduction
There are five parts in the main menu interface. The descriptions of each part are as shown below.
Menu Bar

NVMS User Manual
4
No.
Description
No.
Description
1
Menu Bar
4
Status Bar
2
Tab Bar
5
Alarm Information Bar
3
Functional Areas
Tab Bar
Menu
Description
View
“Live View”, “Edit live view”
System
Including “Live View”, “Record Playback”, “E-Map”, “TV Wall Management”, Resource Management”,
“Account and Permission”, “Alarm System”, “Alarm Center”, “Access Control Management”, “Parking
Lot Management”; “Environment Monitoring”, “Face Recognition”, “People Counting”, “Record
Management”, “Operation and Maintenance Management”
Help
Including “User Manual”, “Register license” and “About NVMS”
Functional area
Menu
Description
Live View
To view live images and to record, snapshot and talk, etc.
Record
Playback
To remotely play the local records or back up records.
E-Map
To manage and display maps, hot spots, etc.
TV Wall
Management
To set TV wall and decoding videos on TV Walls
Resource
Management
To add, modify or delete areas, devices or servers.
Account and
Permission
To add, modify or delete user account and set permissions for these accounts.
Alarm Center
To set alarm linkage and schedule; To search alarm logs.
Alarm System
To set alarm subsystem, zones and linkage of the alarm server
Access Control
Management
To open the door remotely or set alarm linkages or view e-map or search log.
Attendance
Management
To set alarm linkage or view logs.
People Counting
To monitor and analyze people flow in real time
Operation and
Maintenance
Management
To search, export and maintain logs.
Local
Configuration
To set system startup and maintenance, overload, alarm view, network, server port and time.
Other buttons:
Button
Description
Click to exit the software.
Click it to add the live view page.
When the tab pages exceed the applicable numbers, this icon will display. Click it to view the hidden
tabs.

NVMS User Manual
5
3 Device Management
3.1 Add Encoding Device
In the main menu interface, click “Add, Edit or Delete Device”to go to the following interface as shown below.
Click [Add] as shown below.
3.1.1 Quickly Add
Click [Refresh] to quickly search devices in the same local network as shown below. Check the device and allocate the transfer server,
storage server, area for it. After that, click [OK].
Note: * The default media transfer server and storage server can be selected when adding devices. Users can also create new media
transfer server and storage server in advance (see Add Media Transfer Server and Add Storage Server).
* Area must be set up before adding devices. Click [Add Area] to create an area (See Configure Area).
3.1.2 Manually Add

NVMS User Manual
6
①Enter IP address/IP range/domain name/serial number, username and password and choose protocol type.
②Click [Connection Test] to test whether the device is connected successfully or not.
③Select transfer server, storage server and area and then click [OK].
If the device supports P2P function or NAT function, it can be connected by adding serial number.
Devices can be added in batch by adding IP range.
3.1.3 Initiatively Report
Select the “Initiatively Report”Tab to see the following interface.
①Enter the device ID set in the DVR/NVR or IP camera and choose the protocol.
If the DVR/NVR is needed to add, please go to NetworkServer interface of the DVR/NVR. Check “Enable”, enter the IP address
and port (default 2009) of the NVMS and then set the device number of the DVR/NVR.
If the IP camera is needed to add, please go to Network ConfigurationServer Configuration of the IP camera. Check “Do you want
IPcamera to connect Server”, enter the IP address and port (default 2009) of the NVMS and then set the device number of the IP
camera.
②Select the transfer server, storage server, area and then click [OK].
3.2 Modify or Delete Device
After devices are added successfully, they will be listed as below.

NVMS User Manual
7
The device channel number, alarm, connection status can be viewed from the above table.
Click to modify the IP address, port and so on.
Click to delete the added device. Check the devices and click [Delete] to delete devices in bulk.
3.3 Device Setting
Go to HomeDevice Setting interface as shown below. In this interface, the parameters of the device can be set up.
Different devices have different menus. Please configure the device according to the corresponding user manual.
3.4 Area Setting
Go to HomeArea Setting interface as shown below.
Click [Add] to go to Area adding interface. Enter area name to create parent area. Then click [OK] to save the settings. To create sub area,
click [Add], choose the parent area, enter the area name and click [OK].
Click to modify area; click to delete area.
3.5 Channel Group Setting
Go to HomeChannel Group Setting interface as shown below.

NVMS User Manual
8
①Click [Add].
②Enter channel group name, keyboard number and dwell time.
③Add channels to the channel group. Check the desired channels and click to add channels; choose the selected channel and click
to remove those channels; Click to add all channels; click to remove all selected channels.
④Click [Ok] to save the settings.
Select the added channel group and click to modify the channel; click to delete the channel.
3.6 Add Media Transfer Server
Media transfer server is in charge of the video signal reception of the front-end devices (like IPC) and transfers the signal to the client to
view or to the storage server to record. The command of viewing the video of the front-end devices sent by the client or storage server is
transferred by the media transfer server to the front-end devices.
Go to HomeAdd, Edit or Delete DeviceMedia Transfer Server.
Click [Add] to go to media transfer server addition interface. Users can quickly add or manually add media transfer servers.
Select the “Quickly Add” tab and click [Refresh] to quickly search servers in the same local network. Check the desired servers and click
[OK] to save the settings.
Select the “Manually Add” tab to go to the media transfer server adding interface. Enter the server name, IP address and port and click
[OK] to save the settings.
Click to modify the media transfer server; click to delete the media transfer server.
3.7 Add Storage Server
Storage server is in charge of the storage of record information, including the information of schedule record, record based on motion

NVMS User Manual
9
alarm, sensor alarm, smart detection alarm (like object removal detection, line crossing detection, etc.), responding to the search and
playback of all storage data. It also supports self-defined storage path settings and IP-SAN access.
Go to HomeAdd, Edit or Delete DeviceStorage Server.
Click [Add] to go to storage server adding interface. Users can quickly add or manually add storage servers.
Select the “Quickly Add” tab and click [Refresh] to quickly search servers in the same local network. Check the desired servers and click
[OK] to save the settings.
Select the “Manually Add” tab to go to the storage server adding interface. Enter the server name, IP address and port and click [OK] to
save the settings.
After the storage server is added, click to set record partition. In the record partition setting interface, select the disk and click [OK] to
save the settings. Click to modify the storage server; click to delete the storage server.

NVMS User Manual
10
4 Live View
4.1 Live View
Go to HomeLive View interface as shown below.
The descriptions of the live view buttons are as follows.
NO.
Description
NO.
Description
1
Screen display mode
5
Save the current view mode
2
Full screen
6
Snapshot management
3
Enable/disable OSD
7
Record management
4
Close all channel view
8
Choose channel stream
Snapshot management: Click to go to the snapshot management interface. In this interface, you can view the captured pictures by
choosing cameras and setting the start time and the end time. Additionally, the captured time also can be exported by U disk.
Record management: Click to go to the record management interface. In this interface, you can view the record file list by choosing
cameras and setting the start time and the end time. Additionally, the searched record files also can be exported by U disk.
Toolbar on the display window:
Button
Description
Button
Description
Close image
3D zoom in
Start/stop recording
Zoom in
Enable/disable audio
Zoom out
Snapshot
Fit to window
PTZ control
Enable/disable talkback

NVMS User Manual
11
Right-click button function:
Menu
Description
Menu
Description
Close
Channel
Close image
Snapshot
Capture images
Start Record
Start/stop recording
Start
Talkback
Enable/disable talkback
Instant
Playback
Click it to play back immediately
Channel
Info.
Display channel name, IP address and the
current stream
Audio ON
Enable/disable audio
Stream
Choose video stream
PTZ Control
Click it to show PTZ control panel
Full Screen
Display image in full screen
4.1.1 View Mode Setting
Users can select the common display mode and self-define the display mode through the buttons on the toolbar.
To customize the display mode
①Click on the toolbar.
②Enter screen display name and select the display row and column. Hold the left mouse button and drag on the screen and then click
[Merge] to merge the screens.
③Click [Save] to save the settings.
④Click [Create] to create a new display screen mode. Click [Save All] to save all customized screen display modes.
4.1.2 Monitoring Point View
Start View
To start live view, please drag cameras from the list to the right display window or select a window and then double click the camera.
The image can be dragged to any window at random.

NVMS User Manual
12
Stop View
①Place the cursor on the live view window to display the menu toolbar and then click to stop viewing.
②Right click on the live view window and then select “Close Channel” to stop viewing.
③Click on the toolbar of the live view interface to stop all live view.
4.1.3 Channel Group View
Start Channel Group View
After the channel group is set successfully (See Configure Channel Group), go to live view interface as shown below. Choose a channel
group and drag it to a window to view. The channels in the channel group will automatically switch in this window. You can also choose a
window and then double click the channel group name to play videos in this window in sequence. The desired channel in the group also
can be played by dragging it to a window or choosing a window and double-clicking the channel name.

NVMS User Manual
13
Stop Channel Group View
①Place the cursor on the auto-switch window and then click to stop viewing.
②Right click the auto-switch window and then click “Close Channel” to stop viewing.
③Click on the toolbar of the live view interface to stop all live view.
4.1.4 Plan View
In the live view interface, select “View” on the left menu bar.
Add View Plan：
①Right click “Live View 1” and then select “Create View”or click to add a new view plan. Clicking “Create View”to prompt an
adding view window. Enter the view name and click [OK] to set view plan.
②Select screen display mode and then drag monitoring points or channel group to each window.
③Click “View” on the left menu and then right click the newly added view name. Select “Save View” on the pop-up menu to save the
view plan or click on the live view interface to save the view plan.
Double click view name to call the view plan.
Modify or Delete View Plan
Select the added view and then right click to prompt a pop-up window. Select “Modify View” or “Delete View” to modify or delete the
view plan.
4.2 View Control
Multi-screen Display
In the live view interface, the screen display mode can be selected as shown below.

NVMS User Manual
14
Full Screen Display
In the live view interface, click button on the toolbar or right click on the mouse to select “Full Screen” to display the window in full
screen mode. Right click on the mouse to select “Exit Full Screen” on the full screen interface to exit full screen.
Single Channel Display
Double click a window to view in single channel mode. Double click the window again to recover the window.
Stream Setting
Right click on the live view window to choose video stream. Or select self-adaptive stream or other stream on the toolbar to set the stream
for all channels.
To set streams
Go to HomeConfigure Device and Monitoring Spot. Select the device and click “Channel Stream Setting” tab to set streams.
Audio Control
Right click on the live view window and then choose “Audio On” or click on the toolbar of the window to enable audio.
Note: Only one audio can be enabled at the same time. If the audio of one channel is enabled, the former audio will be disabled
automatically.
Zoom In or Out
In the live view interface, click on the live view window to zoom in the window and then drag the image to view the whole image;
click to zoom out the image; click to restore the image size.
4.3 Snapshot
Select a window in which the video is playing and then click on the toolbar of this window or right click on the window and then
select “Snapshot”. A prompt box will appear if the picture is captured successfully.
Note: Only when the video is playing in the window, will the snapshot succeed.
.
4.4 Multi-Screen View
In the live view interface, multi-screen view can be realized by holding a tab and dragging it to other monitors (graphics card should
support multi-screen output at the same time).