twotrees TT503HS User manual

200KG CAPACITY
HAMMOCK SPRING
INSTALLATION
TT503HS
PRODUCT MANUAL
WARNING
Read instructions before use and keep for future reference. Failure to read
these instructions before use can lead to an increased risk of injury. When
installing always check with a qualied builder for safety. Two Trees will
only guarantee the performance of this product when used with other Two
Trees products. i.e. if non Two Trees hammocks are used, the guarantee
is void.

2
WARNING
Read instructions before use and keep for future reference. Failure to read these
instructions before use can lead to an increased risk of injury. When installing always
check with a qualied builder for safety.
1. Assembly must be carried out by an Adult.
2. Ensure hammock is fully assembled
before use.
3. DO NOT exceed the maximum load of
200kgs.
4. DO NOT climb into hammock feet rst.
5. DO NOT stand in hammock.
6. DO NOT dive into or jump about in
hammock.
7. DO NOT stick your head through the
suspension cords.
8. Keep suspension cords as straight as
possible, DO NOT twist.
9. DO NOT use damaged or weakened
hammock hanging accessories.
10. Hammock fabrics and accessories will
wear over time and use. Always check the
loading capacity and condition of parts
before use.
11. Hammocks are not designed for swinging,
playing, climbing or to be used as a
children’s toy.
12. DO NOT leave children or pets
unattended in or near hammock.
13. Hammock fabric, suspension cords and
hanging accessories will become worn
over time and use. Always inspect prior to
use and DO NOT use if items show signs
of damage or weakness.
CAUTION AND SAFETY INSTRUCTIONS
SAFETY INSTRUCTIONS
14. Always check the loading capacity before
use.
15. Keep hammock clear of obstructions.
16. Allow a minimum of 50cm clearance range
around the perimeter of your hammock
when in use (Fig. 1).
17. Only use the hammock on level oors with
shock-absorbing properties such as
carpet or outdoor grass to minimise
the risk of injury in case of an accident.
DO NOT use on slippery or hard
surfaces.
18. Never use a free standing brick wall to
hang your hammock.
19. Only use Two Trees accessories for
hanging your hammock.
20. DO NOT modify hammock. Hammock
must be used in accordance of this
manual.
21. DO NOT smoke in or around the
hammock. Keep away from heat or
ames.
22. DO NOT use whilst wearing shoes,
clothing, jewellery or accessories that
have a hook and loop fastener.
23. DO NOT use near sharp objects.
24. A copy of this manual must be provided
should the hammock transfer ownership.
Thank you for purchasing a Two Trees Hammock Spring.
We at Two Trees know the importance of spending time relaxing. Hence we’ve developed
a range of quality hammocks and convenient accessories that come with easy to follow
instructions so that you will be relaxing in no time. It is important to read all instructions before
use and take care when using your hammock. Please ensure that you adhere to the following
safety measures to get the maximum enjoyment from your new hammock.

THE TWO TREES
HAMMOCKS RANGE INCLUDES
3
SAFETY INSTRUCTIONS
There are many ways to hang your hammock,
here are some of our favourite and recommended
options:
BETWEEN
TWO POSTS
SELECTING THE LOCATION
BETWEEN
TWO WALLS

> 200KGS
4
DO NOT twist or knot suspension cords
when hanging.
DO NOT leave children or pets
unattended in or near hammock.
DO NOT exceed the maximum load
of 200kgs.
Hammocks will stretch by 5-10% after
the rst few uses. Adjustments can be
made after each use to keep you and your
hammock comfortable.
THINGS TO CONSIDER
WARNING
Read instructions before use and keep for future reference. Failure to read these
instructions before use can lead to an increased risk of injury. When installing always check
with a qualied builder for safety.

50cm
50cm
50cm50cm
Hammock
Maximum
Length
150°
3.0m
1.8m
20 - 30cm
5
Allow a minimum of 50cm clearance
range around the perimeter of your
hammock when in use. <Fig.1>
You need a minimum of 3 metres between each
anchor point to get the ideal shape. For longer
distances, simply add a xing strap or some
rope and increase the height of the anchor point
approximately 60cm for every additional metre
in length.
Depending on the hammock the angle will vary.
Conventional hammocks are hung with sag at
approx. 110 degrees. Rod hammocks are hung
taut at approx. 150 degrees.
THINGS TO CONSIDER
HOW TO HANG YOUR HAMMOCK
To hang your Two Trees hammock you will require
two xed points, such as trees, beams, posts, or
dyna bolts into brick walls. Alternatively you can
purchase a Two Trees Universal Stand. Consult a
qualied builder if unsure.
WARNING: Never use a free standing
brick wall to hang your hammock.
Your Two Trees hammock will require a minimum of 3 metres between xing points to get the
ideal shape. Rope may be needed to attach one end of the hammock, it is recommended to
use a double piece to avoid the hammock twisting.
Hang the hammock loops at roughly the same height. When the hammock is in use it should sit
20-30cm above the ground.

6
HOW TO USE
HAMMOCK SPRINGS
Designed for added comfort and safety on all hammock installations. Prior to installing your
hammock, ensure the structure being used to suspend the hammock is strong enough to carry
your body weight.
For perfect results, use your Two Trees hammock spring (TT503HS) with Two Trees hammock
hooks (TT502HH). Use two springs on each end to evenly distribute weight and provide extra
support and comfort. A rope or chain can be used as a connection between your hammock and
xture point.
1. Follow permanent installation instructions.
2. Place hammock spring on the hook. Repeat the process for the other side of hammock.
3. Ensure both springs are secure and then place hammock ends over hooks.
For hammock chairs, x the hanging point from directly above the chair using a rope or chain in
conjunction with your Two Trees hammock spring.
NOTE: TT503HS hammock spring can not be used with the Temporary installation kit. It is
designed for permanent installations only.

Hammock Spring
Hammock Hook
Strong & Secure
7
HOW TO USE
HAMMOCK SPRINGS
WARNING:
DO NOT EXCEED THE MAXIMUM LOAD OF 200KGS
PERMANENT INSTALLATIONS
1. Determine the correct height to hang your hammock.
2. Drill a 10mm diameter pilot hole for hardwood (drill a 9mm hold for soft timber).
3. Fasten screw eye rmly in place. To test, apply load with caution.
4. Place the hammock spring on the hook. Repeat the process for the other side of the
hammock.
5. Ensure both springs are secure and then place hammock ends over hooks.
For perfect results, use your Two Trees hammock hooks(TT502HH) with Two Trees hammock
springs(TT503HS). A rope or chain can be used as a connection between your hammock and
xture point.
NOTE: It is recommended to use structurally sound, strong timber posts that are 10cm square or
more. When installing always check with a qualied builder for safety.
Read instructions before use and keep for future reference. Failure
to read these instructions before use can lead to an increased risk of
injury. When installing always check with a qualied builder for safety.

8
Made in China exclusively for Mayo Hardware Pty Ltd
4 Secombe Place, Moorebank NSW 2170 Australia
Customer Service Phone: [phone]
www.mayohardware.com.au | 2021©
For more information visit
www.twotreeshammocks.com.au
We will honour all statutory guarantees that this product is
of acceptable quality. (including that it is t for purpose)
Issue A