3110943 A User Manual_Tinyom2_v00_01_01_EN.docx Page 4/104
Table of contents
USING THIS DOCUMENT AND ITS CONTENT 2
REVISION AND HISTORY 3
ABLE OF CONTENTS 4
DISPOSAL 5
DISPOSAL OF THE SCANNER,CHARGER AND CABLES 5
DISPOSAL OF THE BATTERY 5
BEAM AND LED 6
GETTING STARTED 7
INTRODUCTION 7
TINYOM II PACKAGE CONTENTS 8
OPTIONAL COMPONENTS 9
TECHNICAL FEATURES 10
CHARGING THE BATTERY PACK 11
INSERTING AND REMOVING THE BATTERY FROM THE READER 12
BATTERY CHARGE STATUS 13
PUTTING TINYOM II ON THE WRIST STRAP AND TAKING IT OFF AGAIN 14
SWITCHING THE READER ON/OFF 15
READER TRIGGER MODES 17
READING MODES 19
AIMING AT A BARCODE 23
READER STATUSES 25
DEFAULT SETTINGS 26
ESTABLISHING A BLUETOOTH CONNECTION 27
FEATURES OF THE TINYOM II BLUETOOTH MODULE 27
SECURITY LEVELS 27
CONNECTION WITH THE HID PROFILE 28
CONNECTION WITH THE SPP PROFILE 39
CONFIGURATION 55
ACCELEROMETER 55
KEYBOARD EMULATION 64
BLUETOOTH 69
PREVENTING DUPLICATE SCANNING 73
CONFIGURING THE BEAM 75
CONFIGURING THE SOUND SIGNAL 80
CONFIGURING THE LENGTH OF TIME BEFORE AUTOMATIC SWITCH-OFF 82
SETTING THE VIBRATION 84
ENABLING AND DISABLING BARCODE TYPES 86
APPENDICES 94
APPENDIX 1: INSTALLING A BLUETOOTH DONGLE 94
APPENDIX 2: WALL MOUNTING FOR BATTERY CHARGING DOCK 97
APPENDIX 3: GENERATING A CONNECTION BARCODE 100
APPENDIX 4: FINDING THE BDA ADDRESS FOR A TINYOM II 102
APPENDIX 5: IN-CAR AND TRUCK CHARGER103
APPENDIX 6: TINYOM II / MOTOROLA ZEBRA / HONEYWELL COMPATIBILITY 104
