Tynetec ENTEL i2 ZFT200 User manual

FM0581 ISSUE A
USER GUIDE
FOR YOUR
ENTEL i2
DOOR ENTRY TELEPHONE
Tynetec Model No. ZFT200
QUICK GUIDE
Close the main entrance door
to secure the building
Door OpenGreen
Press pushbutton to turn
Privacy Mode Off
Privacy Mode OnRed
Lift handset when the
telephone rings
Normal Operating ModeNot Lit
OPTIONS STATUS LED
NOTE
If the LED flashes alternate colours then both conditions exist
Cowley Road, Blyth Riverside Business Park,
Blyth, Northumberland, NE24 5TF
Tel: [phone]
Fax: [phone]
Email: [email protected]
Website: www.tynetec.co.uk

INTRODUCTION
Your Entel i2 telephone will ring when a visitor calls you from the door entry system.
When called, you can have a conversation and release the lock to allow them access.
It is important that you read these instructions before use, if you need further
assistance please contact your Housing Officer.
ÕPUSHBUTTON
ÕLED INDICATOR
The pushbutton has two functions;
1. it can release the main entrance door and allow your visitors access
2. it can select privacy mode and prevent nuisance calls
The LED indicator has two functions;
1. it will illuminate red to indicate privacy mode is selected
2. it will illuminate green to indicate the door is open
TO ANSWER A CALL
Your telephone will ring when a visitor is calling.
The ring tone will repeat for a preset time or until you pick-up the handset.
Lift the handset and speak with the caller.
To allow access, press the telephone pushbutton once.
You will hear a message announcing the door is open.
Replace the handset on the hook to end the call.
Remember, if you do not want to let the caller in or you are unsure of their identity
simply replace the handset to end the call.
If you hold a conversation to within 10 seconds of the preset speech time you will hear
timeout pips before the call is automatically cancelled.
TO SELECT PRIVACY MODE
You can select privacy mode if you do not want to receive any calls;
With the handset on-hook and the phone not ringing, press the pushbutton once.
The LED indicator will illuminate red to indicate privacy is on.
You cannot receive any calls when privacy is on.
To return to normal operation, press the button again and the red LED will go out.
Note: if your system is configured with “Timed Privacy” then the telephone will
automatically revert to normal operation after a preset period.
DOOR OPEN INDICATION
When the entrance door is open the LED indicator will illuminate green on ALL
telephones simultaneously - when the door is closed all will extinguish.
If the LED is illuminated green for an extended period it is likely that the entrance
door has been left open and the building is not secure.
Note: the indicator will not go green during an active call.
FLASHING LED INDICATOR
If you have privacy mode selected and the main entrance door is left open the LED
indicator will flash red/green until the door is closed.