Tyro Pyxis 2F User manual

Tyro Pyxis/Auriga 2F, 4F, 6F or 8F wireless remote control
Page 1
Tyro Remotes Tel: [phone]
Bedrijvenpark Twente 1-B Fax: [phone]
7602 KA Almelo E-mail: [email protected]
The Netherlands Website: www.tyroremotes.eu
Manual 868 MHz
Pyxis transmitter and Auriga receiver
Number of functions: 2, 4, 6 or 8, ON/OFF.
Button functions
To activate the Pyxis transmitter: press and hold the “I” button for two seconds.
To deactivate the Pyxis transmitter: press and hold the “O” button for a second.
Mounting
To optimize the range of the Pyxis transmitter, it is recommended to place the antenna of the Auriga receiver as high
as possible and free from any metal objects. After connecting and mounting, it is recommended to test the device
before connecting it to the main powersource. Cable scheme is as follows:
Pyxis transmitter 2F
Auriga receiver 3R PLC
Button
Relays
Inputs
Relays input
Relays output
“O”
1 deactivated
C 1
Q 1
“I”
1 activated
I1
C 1
Q 1
1↑
2
I2
C 2
Q 2
2↓
3
I3
C 3
Q 3
Pyxis transmitter 2F proportional
Auriga receiver 10R PLC +Analog
Button
Relays
Inputs
Relays input
Relays output
“O”
1 deactivated
C 1
Q 1
“I”
1 activated
I1
C 1
Q 1
1 ↑
2 +Analog on AO
I2
C 2
Q 2
2 ↓
3 +Analog on AO
I3
C 3
Q 3
Pyxis transmitter 4F
Auriga receiver 5R PLC
Button
Relays
Inputs
Relays input
Relays output
“O”
1 deactivated
C 1
Q 1
“I”
1 activated
I1
C 1
Q 1
1
2
I2
C 2
Q 2
2
3
I3
C 3
Q 3
3
4
I4
C 4
Q 4
4
5
I5
C 5
Q 5
Pyxis transmitter 4F proportional
Auriga receiver 10R PLC +Analog
Button
Relays
Inputs
Relays input
Relays output
“O”
1 deactivated
C 1
Q 1
“I”
1 activated
I1
C 1
Q 1
1↑
2 +Analog on AO
I2
C 2
Q 2
2↓
3 +Analog on AO
I3
C 3
Q 3
3
4
I4
C 4
Q 4
4
5
I5
C 5
Q 5
All deliveries will be subject to our general sales conditions, available on demand or through
our website. Our products are certified for many applications. When mounting, always take
into account the applicable machine directives.

Tyro Pyxis/Auriga 2F, 4F, 6F or 8F wireless remote control
Page 2
Tyro Remotes Tel: [phone]
Bedrijvenpark Twente 1-B Fax: [phone]
7602 KA Almelo E-mail: [email protected]
The Netherlands Website: www.tyroremotes.eu
Please note: All systems are already programmed by the manufacturer.
Programming a new or extra Pyxis transmitter into the Auriga receiver
If you wish to program a new or extra Pyxis transmitter to the Auriga receiver, please follow the below-
mentioned steps:
Picture 1.
Pyxis transmitter 4F en 6F with
double function button
Auriga receiver 10R PLC
Button
Relays
Inputs
Relays input
Relays output
“O”
1 deactivated applicable
C 1
Q 1
“I”
1 activated
I1
C 1
Q 1
1
2 and double function on 8
I2
C 2 *df on C 8
Q 2 *df on Q 8
2
3 and double function on 8
I3
C 3 *df on C 8
Q 3 *df on Q 8
3
4 and double function on 9
I4
C 4 *df on C 9
Q 4 *df on Q 9
4
5 and double function on 9
I5
C 5 *df on C 9
Q 5 *df on Q 9
5
6 and double function on 10
I6
C 6 *df on C 10
Q 6 *df on Q 10
6
7 and double function on 10
I7
C 7 *df on C 10
Q 7 *df on Q 10
Buttons 5 and 6 are only active on a 6F Pyxis transmitter!
*df = double function!
Pyxis transmitter 8F
Auriga receiver 10R PLC
Button
Relays
Inputs
Relays input
Relays output
“O”
1 deactivated
C 1
Q 1
“I”
1 activated
I1
C 1
Q 1
1
2 and 10
I2
C 2 and C 10
Q 2 and C 10
2
3 and 10
I3
C 3 and C 10
Q 3 and C 10
3
4 and 10
I4
C 4 and C 10
Q 4 and C 10
4
5 and 10
I5
C 5 and C 10
Q 5 and C 10
5
6 and 10
I6
C 6 and C 10
Q 6 and C 10
6
7 and 10
I7
C 7 and C 10
Q 7 and C 10
7
8 and 10
I8
C 8 and C 10
Q 8 and C 10
8
9 and 10
C 9 and C 10
Q 9 and C 10
Steps
Discription
1.
Open the enclosure of the Auriga receiver
2.
You’ll see 2 pcb’s on the top of each other
3.
Connect the powersource wire on V+, screw terminal on the Auriga receiver (see picture 2)
4.
Connect the ground wire on the V-, screw terminal on the Auriga receiver (see picture 2)
5.
On the lower print there is a white button (see picture 1)
6.
Push and hold this white button (also in the next steps)
7.
Turn on the power of the Auriga receiver again
8.
Turn on the Pyxis transmitter you will hear clicking of the relays, if you push and hold the white button
for more than 10 seconds all Pyxis transmitters will be deleted
9.
Now release both buttons, the system is programmed and is ready to use
10.
If you wish to program an additional Pyxis transmitter to the Auriga receiver, please repeat steps 7 to 9
for every Pyxis transmitter

Tyro Pyxis/Auriga 2F, 4F, 6F or 8F wireless remote control
Page 3
Tyro Remotes Tel: [phone]
Bedrijvenpark Twente 1-B Fax: [phone]
7602 KA Almelo E-mail: [email protected]
The Netherlands Website: www.tyroremotes.eu
Technical specifications 868MHz:
For proper usage of the Pyxis transmitter, it has to be charged every day!
How to turn on the backlight:
Firstly, turn the Pyxis transmitter off.
If you hold the green button for 5 seconds, the backlight will be activated.
If you hold the green button again for 5 seconds, the backlight will be deactivated.
Standard options:
Pyxis transmitter and Auriga receiver.
Rechargeable battery.
Backlit keyboard.
Receiver antenna 868MHz.
Carkit 12V/24Vdc or 230Vac adapter.
Maximum 8 Pyxis transmitters can be programmed to one Auriga receiver.
Auto sleep after 5 minutes.
Extra options:
Keypad on the Auriga receiver.
Coax extension cable and torque piece, available lengths: 1 meter, 2 meters or 5 meters.
Protective case for the Pyxis transmitter.
PLC with analog functions.
Double function buttons (only available on the 4 and 6F remote controls).
Display on the Pyxis transmitter and the Auriga receiver (not available on the 8F Pyxis transmitter).
Multiple functions at the same time.
Latch function (bi-stable output contact).
Standby time (10/15 minutes) or no standby time
Auriga receiver
Operation voltage
10-38Vdc
Max. output amps
3A (at 24 Vdc)
IP classification
IP-66
PLC
3, 5 or 10 Relays
Weight
856 gram
Dimensions
160x150x60 mm
Pyxis transmitter
Max. charging voltage
26Vdc
Min. charging voltage
12Vdc
Battery standby time
± 200 hours
Battery usage time
± 32 hours, ± 7 hours with backlight
turned on
Normal charging time
± 5 hours
IP classificatioin
IP65
Range
Up to 350 meters
Weight
192 gram
Dimensions
150x71x31 mm
Frequency
868 Mhz