1. Self closing door hinges are engaged when
door is open approximately 8-10 inches
BENEFIT:
Ensures a positive door seal and
prevents door bounce back.
2. “L” shaped door hinges
BENEFIT:
This hinge design provides greater
door support thereby permitting larger and heavier
door panels and full overlay doors to be utilized.
3. A slightly contoured, across the top, integrated
door handle design for black and white units
BENEFIT:
The contoured shape maintains the
stylized shape of the Échelon™ series plus permits
full door field reversibility on black and white units.
4. Improved Refrigeration System
BENEFIT:
Provides COLDER ice making and ice
storage temperatures thereby providing a “harder”
ice cube less prone to sticking together and also
increasing the daily ice making capacity by 35%.
The refrigerator portion of the CO2075FF also
maintains a consistent temperature.
5. Flat, recessed, front grille with “warmer/colder”
control settings
BENEFIT:
Greater toe kick space. Easy to read
molded temperature control settings. The grille
design shields the interior motor compartment and
all electrical components from view.
6. New condenser design
BENEFIT:
Optimizes product performance and
energy efficiency while providing reductions in noise
levels.
7. New style condenser fan motor located farther
away from the condenser
BENEFIT:
Further reduces the noise level with the
utilization of the new condenser that permits the use
of a lower speed condenser fan.
8. Easier service accessibility to components
BENEFIT:
Evaporator and evaporator fan motor
easily accessible from the front without removing the
freezer housing. The temperature control and defrost
timer are easily accessible from the front. The ice
maker assembly and the evaporator fan have a
quick disconnect plug. The ice maker assembly is
mounted by only two screws making it easy to
remove and service.
9. All stainless steel units have a seamless full
wrap stainless steel cabinet and door with
sculpted, contoured handle.
BENEFIT:
This seamless full wrap stainless steel
door with sculpted stainless handle distinguishes the
Échelon™ stainless steel units from other heavier
“commercial” looks. All stainless steel units have a
full wrap stainless cabinet, stainless hinges, and
black grille. All stainless units must be ordered either
right or left hand hinged and are not field reversible.
10. The CO2075FF stainless unit is deemed suitable
for outdoor use by UL.
BENEFIT:
For those outdoor applications that
require products that are deemed suitable for
outdoor use by UL, the Combo 2075FF stainless
steel unit meets these requirements.
11. Field reversible doors (except stainless steel).
BENEFIT:
Greater flexibility where the unit can
be installed and allows for side-by-side applications.
SUPERIOR FEATURES OF ÉCHELON™
ADDITIONAL FEATURES
1. Approximately 4.2 cubic feet of refrigeration
2. No drain required for water
3. Conserves on water
4. Built-in or freestanding
5. All doors (except stainless steel) accommodate a
1/4 inch thick custom panel. Door comes standard
with factory installed black or white flush panel
6. Door locks optional on black and white units. Not
available on stainless steel
7. Interior light
8. Vinyl clad steel cabinet (black / white)
9. Adjustable leveling legs
10. Available in black, white and stainless steel
BENEFITS
Ice making and refrigeration in one compact unit.
Easy and inexpensive to install. Requires only a 1/4
inch outside diameter water line.
Uses only 2-3/4 gallons of water to produce
approximately 22 lbs. of ice.
Provides custom look. No additional clearance around
sides, top, or rear for ventilation. Do not obstruct front
grille.
Standard feature to achieve a custom, built-in look by
matching surrounding cabinets.
Doors remain field reversible. Locks located in upper,
middle portion of door.
Automatically illuminates when door opens.
Textured, rich look. More resistant to scratching, peeling
and flaking. Cabinet sides extend completely to the floor.
More precise undercounter fit, durable-factory installed.
Blends with all cabinet colors.
CO2075FF
