Uctronics U6113 User manual

UCTRONICS IEEE
802.3af Micro-USB
Ethernet (PoE)
Adapter
U6113
Copyright
Specifications are subject to change without
notice. No part of the specifications may be
reproduced in any form or by any means or
used to make any derivative such as transla-
tion, transformation, or adaptation without
permission from UCTRONICS. All rights re-
served.
Package Contents
The following items are included in your pack-
age:
●UCTRONICS IEEE 802.3af Micro-USB
Ethernet (PoE) Adapter
●This User Guide
Introduction
Thank you for choosing UCTRONICS U6113
IEEE 802.3af Micro-USB Ethernet (PoE) Adapt-
er.
It is an ultimate Micro-USB Ethernet adapter
with multiple working modes, which helps you
supply Ethernet and power over a single Mi-
cro-USB connector. With its PoE (Power over
Ethernet) support, you can even use a single
Ethernet cable to deliver both network con-
nection and power supply to your Micro-USB
devices (that support ethernet over Micro-
USB port) in a stable hardwire connection.
Note: You need an PoE switch or injector
(IEEE 802.3af recommended) to serve as the
PSE (Power Source Equipment) when you are
using this adapter in the PoE mode.
Identifying Ports
1
2
1
2
3
Micro-USB Power In: Optional power
input. Only required when you want the
target device powered but your Ethernet
cable does not carry PoE power.
PoE/Ethernet In: 2 ways to connect. You
can connect an Ethernet cable that carries
the IEEE 802.3af compliant PoE signal to
this port.
Or if you connect a plain Ethernet cable
without power, then an extra power
adapter is required in
1 to deliver both
power and data. otherw
ise, it works as a
casual USB Ethernet adapter.
Micro-USB Out: Connect to the Micro-
USB port of your target device which
support power and Ethernet over USB at
the same time.
3

Connecting the
Adapter
1. PoE to Micro-USB Adapter Mode: Use an
Ethernet cable running from the Power
source (IEEE 802.3af compliant PoE switch or
injector) to connect to the PoE/Ethernet IN
port of this adapter, and then connect Micro-
USB Out to your device.
Specs
Normal
Standards IEEE 802.3af
Power Input IEEE 802.3af PoE / 5V
Micro-USB power
Ports PoE Port 10/100Mbps RJ45
LAN Port
Power Output 12.5W Max (5V/2.5A)
Safety & Emissions FC, CE
Environmental and Physical
Operating Temp. 0C~40C(32F~104F)
Storage Temp. -40C~70C (-40F~158F)
Operating Humidity 10%~90% RH, Non-
condensing
Storage Humidity 5%~90% RH, Non-
condensing
Contacts
Email: [e-mail]
Website: www.uctronics.com
3. Micro-USB Ethernet Adapter Mode: Con-
nect an Ethernet cable with network connec-
tion to the PoE/Ethernet IN port of this
adapter, and then connect Micro-USB Out to
your device. The adapter will not feed power but will
deliver Ethernet to your device, which should have
been powered with another power supply.
2. Fire TV Ethernet Adapter Mode: Connect
an Ethernet cable with network connection to
the PoE/Ethernet IN port of this adapter,
insert an extra Micro-USB power supply to
Micro-USB Power In and then connect Micro-
USB Out to your device.