Ultimate Ears WONDERBOOM Setup guide

How do I set up my WONDERBOOM?
Bluetooth
Out of the package, WONDERBOOM is ready to pair with your first Bluetooth device. Here’s
how:
Turn the speaker on by pressing the power button on the top of the speaker. The power indicator
will glow white, and the Bluetooth connect button (above the ULTIMATE EARS LOGO) will
blink white rapidly.
On your Bluetooth device, go to the Bluetooth menu and scan for devices (make sure Bluetooth
is enabled).
Select WONDERBOOM from the list of devices.
Once paired and connected, you’ll hear an audible confirmation from the speaker. This means
your WONDERBOOM is ready to use. You can pair additional devices with your speaker.
Q: How do I use my ULTIMATE EARS speaker with a computer?
A: You can connect your ULTIMATE EARS speaker to a Mac or PC that has Bluetooth
capabilities. Connect to Mac
Turn the speaker on.
If this is the first device you’re pairing to your ULTIMATE EARS speaker, it’s ready to pair.
Otherwise, hold down the Bluetooth button until you hear a tone. The Bluetooth connection
button will blink rapidly, indicating the speaker is ready for pairing.
From the Apple menu, select System Preferences.
Open the Bluetooth preference pane.
Find and select your ULTIMATE EARS speaker in the Available Devices list, and then click
Pair.
Connect to PC
Turn the speaker on.
If this is the first device you’re pairing to your ULTIMATE EARS speaker, it’s ready to pair.
Otherwise, hold down the Bluetooth button until you hear a tone. NOTE: The Bluetooth
connection button will blink rapidly, indicating the speaker is ready for pairing.
Open the Control Panel.

Select Hardware and Sound.
Select Devices and Printers.
Select Bluetooth Devices.
Click Add a device.
Select your ULTIMATE EARS speaker from the list of devices, and then click Next. NOTE: If
the Bluetooth Device Control window opens, expand the Headset type menu, select “My hands-
free device “UE speaker” does not have a display”, and then click Apply.
Once your speaker is paired and connected, you’ll have to select the ULTIMATE EARS speaker
as the default playback device in the Windows Sound settings. Here’s how:
Open the Control Panel.
Select Hardware and Sound.
Under Sound, select Manage Audio Devices.
Select “Speakers Bluetooth Hands-Free Audio” and click Set Default.
Click OK.
Why won’t my Bluetooth device connect to my WONDERBOOM?
If your Bluetooth device won’t connect to your WONDERBOOM, try the following:
Make sure your speaker is turned on
Make sure your device is paired with your speaker and Bluetooth is active
Place your Bluetooth device closer to the speaker –it might be out of range
Move your Bluetooth device and speaker away from other wireless sources –you could
be experiencing interference
Turn your ULTIMATE EARS speaker off, and then back on again
If you have multiple ULTIMATE EARS speakers, make sure you’re connected to the
correct one
Your ULTIMATE EARS speaker can store up to 8 devices in memory and keep three
active connections (two for BOOM) devices at a time -- make sure you don’t already
have three devices connected
NOTE: If this is the first time you’re pairing a device with your speaker, you don’t need
to press the Bluetooth connection button. It comes out of the box ready to pair.