ULTIMATE SPEED UMAP 12000 B2 User manual

PORTABLE JUMP STARTER WITH POWER BANK UMAP 12000 B2
MOBILE AUTOSTARTHILFE MIT POWERBANK UMAP 12000 B2
AIDE AU DÉMARRAGE MOBILE POUR VOITURES AVEC BATTERIE EXTERNE
POWERBANK UMAP 12000 B2
IAN 392494_2201
PORTABLE JUMP STARTER
WITH POWER BANK
AIDE AU DÉMARRAGE MOBILE
POUR VOITURES AVEC BATTERIE
EXTERNE POWERBANK
STARTOVACÍ ZDROJ
S POWERBANKOU
MOBILNÝ ŠTARTOVACÍ ZDROJ
S POWERBANKOU
STARTHJÆLP TIL BIL
MED POWERBANK
HORDOZHATÓ INDÍTÁSRÁSEGÍTŐ
POWERBANKKAL
Operation and Safety Notes /
Translation of the original instructions
Consignes d’utilisation et de sécurité
Traduction du mode d’emploi d‘origine
Návod k obsluze a bezpečnostní pokyny
Originální návod k obsluze
Návod na obsluhu a bezpečnostné upozornenia
Originálny návod na obsluhu
Brugs- og sikkerhedsanvisninger
Oversættelse af den originale driftsvejledning
Kezelési és biztonsági hivatkozások
Az eredeti használati utasítás fordítása
GB IE NI CY MT
FR BE CH
CZ
SK
DK
HU
MOBILE AUTOSTARTHILFE
MIT POWERBANK
MOBIELE AUTOSTARTHULP
MET POWERBANK
MOBILNE URZĄDZENIE
DO ROZRUCHU SAMOCHODU
ZPOWERBANKIEM
ARRANCADOR MÓVIL PARA
COCHE CON BATERÍA EXTERNA
AUSILIO PORTATILE PER AVVIA-
MENTO AUTO CON POWERBANK
MOBILNI PRIPOMOČEK ZA
ZAGON AVTOMOBILA S POLNILNO
BATERIJO POWERBANK
Bedienungs- und Sicherheitshinweise /
Originalbetriebsanleitung
Bedienings- en veiligheidsinstructies
Vertaling van de originele bedieningshandleiding
Wskazówki dotyczące montażu, obsługi i bezpieczeństwa
Tłumaczenie oryginalnej instrukcji eksploatacji
Instrucciones de funcionamiento y de seguridad
Traducción del manual de funcionamiento original
Istruzioni di montaggio, utilizzo e sicurezza
Traduzione delle istruzioni d’uso originali
Navodila za upravljanje in varnostna opozorila
Prevod originalnega navodila za uporabo
DE
NL
PL
ES
IT
SI
AT
BE
CH
OS
MT CH

GB IE NI CY MT
Before reading, unfold the page containing the illustrations and familiarise yourself
with all functions of the device.
DE AT CH
Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und machen Sie sich
anschließend mit allen Funktionen des Gerätes vertraut.
FR BE CH
Avant de lire le document, allez à la page avec les illustrations et étudiez toutes les
fonctions de l’appareil.
NL BE
Klap, voordat u begint te lezen, de pagina met afbeeldingen uit en maak u aansluitend
vertrouwd met alle functies van dit apparaat.
CZ
Než začnete číst tento návod k obsluze, rozložte stránku s obrázky aseznamte se se
všemi funkcemi zařízení.
PL
Przed przeczytaniem proszę rozłożyć stronę z ilustracjami, a następnie proszę
zapoznać się zwszystkimi funkcjami urządzenia.
SK
Prv než začnete čítať tento návod, rozložte si stranu s obrázkami a potom sa
oboznámte so všetkými funkciami zariadenia.
ES
Antes de leer, abra la página con las ilustraciones y familiarícese con todas las
funciones del dispositivo.
DK
Før du læser, vend siden med billeder frem og bliv bekendt med alle apparatets funktioner.
IT MT CH
Prima di leggere aprire la pagina con le immagini e prendere confidenza con le
diverse funzioni dell’apparecchio.
HU
Olvasás előtt hajtsa ki az ábrát tartalmazó oldalt, és ezután ismerje meg a készülék
mindegyik funkcióját.
SI
Pred branjem odprite stran s slikami in se nato seznanite zvsemi funkcijami naprave.
GB/IE/NI/CY/MT Operation and Safety Notes Page 5
DE/AT/CH Montage-, Bedienungs- und Sicherheitshinweise Seite 29
FR/BE/CH Consignes d’utilisation et de sécurité Page 54
NL/BE Bedienings- en veiligheidsinstructies Pagina 81
CZ Návod k obsluze a bezpečnostní pokyny Strana 105
PL Wskazówki dotyczące montażu,
obsługi i bezpieczeństwa Strona 129
SK
Návod na obsluhu a bezpečnostné upozornenia Strana
155
ES Instrucciones de funcionamiento y de seguridad Página 180
DK Brugs- og sikkerhedsanvisninger Side 205
IT/MT/CH Istruzioni di montaggio, utilizzo e sicurezza Pagina 229
HU Kezelési és biztonsági hivatkozások Oldal 255
SI Navodila za upravljanje in varnostna opozorila Stran 281

A
B
C D
10
14
11
15 16
12 13
E
16c16b16a
F
17
16c
16b
16a
17
1
247
9
6 38 5


GB/IE/NI/CY/MT 5
Table of pictograms used ....................................Page 6
Introduction ..........................................................Page 7
Intended use .........................................................Page 8
Scope of delivery...................................................Page 8
Parts description ....................................................Page 9
Technical Specifications..........................................Page 10
General safety instructions .................................Page 11
Specific safety instructions ..................................Page 15
Using the device...................................................Page 16
Check the capacity of the portable jump
starter with power bank..........................................Page 16
Charge portable jump starter with power bank..........Page 17
Using the jumpstart feature......................................Page 17
Charging mobile phones and tablets........................Page 19
Using the 12 V DC output 8 A with
cigarette lighter adapter .........................................Page 19
Switch on lighting ..................................................Page 19
FAQs ......................................................................Page 20
Troubleshooting ...................................................Page 21
Cleaning................................................................Page 21
Storage .................................................................Page 22
Information about recycling and disposal.........Page 22
Original EC Declaration of Conformity...............Page 24
Warranty and service information.....................Page 25
Warranty conditions...............................................Page 25
Warranty period and statutory claims for defects.......Page 26
Extent of warranty..................................................Page 26
Processing of warranty claims .................................Page 26
Service...................................................................Page 27

6GB/IE/NI/CY/MT
zTable of pictograms used
Read the operating instructions!
Please note
Observe warnings and safety instructions!
The LED bulb is not suitable for domestic
room lighting.
-21°C
The LED bulb is suitable for extreme
temperatures down to -21 °C.
Appliance class III
The device is only suitable for indoor
operation.
V~ Alternating voltage in volt
Made from recycled material.
Packaging material made
from corrugated paper
Keep away from rain and moisture!
On/off switch for LED
Risk of serious injury or death!

GB/IE/NI/CY/MT 7
Warning: Risk of electric shock!
Danger to life!
Caution! Explosion hazard!
Don’t throw away – recycle!
Dispose of the device and packaging in an
environmentally friendly manner!
You are legally obliged to place devices marked
as such in a collection which is separate from
unsorted municipal waste. Disposal through
household waste is prohibited.
Direct current
Portable jump starter with power bank
UMAP 12000 B2
zIntroduction
Congratulations! You have purchased one of our
high-quality products. Please familiarise yourself with
the product before using it for the first time. To do this, please read
through the following operating and safety instructions carefully.
This product must be set up or used only by people who have
been trained to do so.
KEEP OUT OF THE REACH OF CHILDREN!
PLEASE NOTE: Only for petrol motors with a max.
3 litre engine and for diesel motors with a max. 2 litre
engine.

8GB/IE/NI/CY/MT
zIntended use
This portable jump starter with power bank serves as additional
support for 12 V vehicle battery systems during starting problems in
diesel and petrol vehicles, which is caused by weak, empty or faulty
starter batteries. However, the portable jump starter with power
bank cannot replace the vehicle battery. If no more than 500A
are needed for starting (max. peak current), the power bank lets
the user single-handedly start the vehicle when necessary, without
additional help from a third party. This portable jump starter with
power bank does not serve as additional support for 6 V batteries.
The portable jump starter with power bank also has 2 USB outputs.
This means that mobile phones, satnavs or other USB-enabled
devices can also be charged if needed. Keep these instructions in a
safe place. Ensure you hand over all documentation when passing
the product on to anyone else. Any use that differs to the intended
use as stated above is prohibited and potentially dangerous.
Damage or injury caused by misuse and disregarding the above
warning is not covered by the warranty or any liability on the part
of the manufacturer. The device is not intended for commercial use.
Commercial use will void the guarantee.
The LED bulb is not suitable for domestic room lighting.
-21°C The LED bulb is suitable for extreme temperatures down
to -21 °C.
zScope of delivery
1 portable jump starter with power bank
1 3-way USB cable
1 jump lead
1 12 V cigarette lighter adapter
1 set of operating instructions
1 storage bag

GB/IE/NI/CY/MT 9
zParts description
PLEASE NOTE: After unpacking the product, please check
that all of the package contents are present and that the device is
in perfect condition. Do not use the device if it is defective.
For this see Fig. A to F:
1Portable jump starter with power bank
2LED light
312 V DC output 8 A
4Charging port (USB-C)
5USB output 5 V /1A
6USB output 5 V /2A
7Power button (power bank and light)
8Charge status indicator lights
9Vehicle jumpstart outlet
10 Jump lead
11 Button LED box
12 Start LED
13 Error LED
14 12 V/8 A cigarette lighter adapter
15 USB A connector
16 3-way USB cable
16a USB C connector

10 GB/IE/NI/CY/MT
16b Mini USB connector
16c Micro USB connector
17 Storage bag
PLEASE NOTE: The use of the terms “product” or “device”
in the following text refers to the portable jump starter with power
bank named in these operating instructions.
zTechnical Specifications
The four individual cells used to construct the rechargeable
battery pack are connected in series to produce a total voltage
of 4 × 3.2V ≈ 12V and a capacity of 3000 mAh. The battery
output produced in this way is the same as the output from a
rechargeable battery pack with a total capacity of 12000 mAh
at 3.2 V.
Model: UMAP 12000 B2
Battery, type: Lithium polymer rechargeable
battery pack (F8054106)
Battery, chemical system: Lithium Iron Phosphate (LiFePO4)
Battery, capacity:
12000 mAh/ 3.2 V /38.4 Wh
Charge cycles: 1500
Charging time: max. 13.5 hours
at 1 A charge current
Peak current: 500 A
Starting current: 300 A
Operating temperature
for power bank:
0–60 °C
Operating temperature
for LED:
-21 °C – 60 °C
Voltage: 12 V

GB/IE/NI/CY/MT 11
Input voltage
(charging port):
5 V /1A (USB-C)
Capacity: 7000 mAh/5 V
Output voltage (USB port): 5 V /1 A/2 A
Please note: Only for petrol motors with
a max. 3litre engine and for diesel motors with
a max. 2litre engine.
Changes to technical and visual aspects of the product may be
made as part of future developments without notice. Accordingly,
no warranty is offered for the physical dimensions, information
and specifications in these operating instructions. The operating
instructions cannot therefore be used as the basis for asserting a
legal claim.
zGeneral safety instructions
This section covers the basic safety regu-
lations applicable when working with the
device.
Personal safety:
This device may be used by children
aged 8 years and older, and by persons
with reduced physical, sensory or mental
capacities, or a lack of experience and
knowledge, if they are supervised or have
been instructed in how to use the device
safely and understand the dangers that
may arise when using it. Do not allow
children to play with the device. Cleaning
and day-to-day maintenance must not be
performed by children without supervision.

12 GB/IE/NI/CY/MT
Children must be supervised to ensure
that they do not play with the device.
Keep the device away from people –
especially children – and household pets.
Within the working area, the user is
responsible for any damage or injury to
third parties that was caused by the use
of the device.
Keep the device in a dry location and
out of the reach of children.
CAUTION! How to avoid dam-
age to the device and any harm to
persons that may result from such
damage:
Working with the device:
Do not use the device while driving the
vehicle.
In hot weather, do not leave the device
in a car. This could permanently damage
the device. Before setup or first use,
check the device for any damage and do
not use unless in perfect working order.
Do not expose the device to rain or wet
weather and do not allow it to come into
contact with water or to be submerged
in water. There is a risk of electric shock!
Keep all openings of the device free during
operation. Do not block the openings with
your hands or fingers, and do not cover
the device. There is a risk of overheating!

GB/IE/NI/CY/MT 13
Switch the device off and remove the
plug from the socket in the following
cases:
–when you are not using the device;
–if you are leaving the device
unsupervised;
–when you are carrying out cleaning
or maintenance work
–if the connection cable is damaged
–if foreign objects have got into the
device or you notice unusual noises
Only use the accessories supplied and
recommended by the manufacturer.
Do not dismantle or modify the portable
jump starter with power bank. This device
must only be repaired by a maintenance
technician.
Do not use the device in areas with a
risk of explosion, e.g. near flammable
liquids, gases or powders.
Do not expose the device to any source
of heat.
Do not store in places where the
temperature can exceed 70 °C.
Only charge in an ambient temperature
between 0 °C – 40 °C.
Only use the 3-way USB cable 16 as
supplied with the device.
CAUTION! How to avoid
accidents and injuries resulting
from electric shock:

14 GB/IE/NI/CY/MT
Electrical safety:
Do not carry the device by the cable.
Do not unplug the plug from the socket
by pulling on the cable. Protect the cable
from heat, oil and sharp edges.
Do not short-circuit the two crocodile clips.
This can lead to a hazardous situation!
Do not use the device if the switch
cannot be switched on and off. Arrange
for damaged switches to be replaced.
If the cable is damaged, unplug the plug
immediately from the socket.
Rechargeable battery packs:
CAUTION! EXPLOSION HAZARD!
Do not short-circuit the rechargeable bat-
tery pack and/or open it. This could cause
the device to overheat, ignite or explode.
Do not expose the rechargeable battery
pack to high temperatures. It could
explode.
Regularly check the rechargeable
battery pack for leakage. Leaking or
damaged rechargeable battery packs
may cause burns to the skin if touched;
therefore, always wear suitable safety
gloves! Carefully wipe up the liquid with
a cloth and avoid contact with skin and
eyes. In the event of contact with skin or
eyes, rinse immediately with clean water
and seek medical attention.

GB/IE/NI/CY/MT 15
zSpecific safety instructions
We recommend charging the portable
jump starter with power bank 1once a
month.
A slightly higher temperature during
charging is absolutely normal and not a
malfunction. However, we do recommend
leaving the portable jump starter with
power bank
1
to rest for 15 minutes
before using.
Protect the portable jump starter with
power bank 1from moisture and high
temperatures, including fires.
Store the portable jump starter with
power bank
1
in a dry place and protect
the device from moisture and corrosion.
If you notice the portable jump starter
with power bank 1is leaking, producing
an unusual odour or looking deformed
in any way, stop using the device imme-
diately and contact the manufacturer.
Do not drop the portable jump starter
with power bank
1
while it is being used.
When using the jump lead 10, ensure
that the blue plug is securely plugged
into the vehicle jumpstart outlet 9.
When using the jumpstart, make sure
that at least 3 indicator lights 8are
illuminated.
If the indicator lights for charging status
8
go out during the start attempt, charge

16 GB/IE/NI/CY/MT
the portable jump starter with power
bank
1
.
If the vehicle does not start after the 3rd
to 5th start attempt, stop the start process
and check the other causes that may be
preventing the vehicle from starting.
zUsing the device
zCheck the capacity of the portable jump
starter with power bank
PLEASE NOTE: After switching on the portable jump starter
with power bank 1using the power switch 7the device will
switch off automatically after approx. 20 seconds, if a consumer
unit is not connected.
To check the capacity of the portable jump starter with power
bank 1press the power switch 7.
During charging, the indicator lights will flash 8.
The number of permanently lit indicator lights 8shows the
charge level of the portable jump starter with power bank 1.
If the portable jump starter with power bank 1is completely
charged, all indicator lights 8will light up permanently.
Indicator lights Charge level
not permanent 0%
1 permanently lit 25%
2 permanently lit 50%
3 permanently lit 75%
4 permanently lit 100%

GB/IE/NI/CY/MT 17
zCharge portable jump starter with
power bank
Connect the 3-way USB cable 16 with the charging port
(USB-C) 4and an appropriate USB-A socket or an
appropriate USB network adapter (working output voltage
Uout,max 5 V ).
PLEASE NOTE: USB network adapter not included in the
scope of delivery.
PLEASE NOTE: An undervoltage protection circuit is
installed in the portable jump starter with power bank 1to
protect the device from damage. This prevents a deep discharge
of the portable jump starter with power bank 1and automati-
cally switches the device off once the rechargeable battery pack
is fully discharged. Shortly before the undervoltage protection
circuit is activated, the last blue indicator light 8will start to
flash. As soon as the undervoltage protection circuit is activated,
the last blue indicator light 8flashes and power will no longer
be delivered. Please charge the portable jump starter with power
bank 1again.
zUsing the jumpstart feature
Step LEDs Meaning / Error Solution
1. Connect the
jump lead 10 of
the portable
jump starter with
power bank...
Red Error LED 13
is continuously lit
on the jump lead
10.
The voltage
determined in
the portable
jump starter with
power bank 1
is not enough to
start the car.
Charge the
portable jump
starter with
power bank
1.
... to the
jumpstart outlet
9of the mobile
jump starter with
power bank 1.
Green Start LED
12 and the red
Error LED 13
flash alternately.
The portable
jump starter with
power bank 1
is ready.
Carry on with
step 2.

18 GB/IE/NI/CY/MT
2. First connect
the red clamp
(A) to the
positive pole
of the vehicle
battery and
then connect the
black battery
clamp (B) to the
negative pole
(see Fig. 1).
The red Error
LED 13 flashes,
a short alarm
signal sounds.
The temperature
is too high,
possibly due to
several jump
start attempts.
Disconnect
the black (B)
battery clamp
first and then
the red clamp
(A) from the
battery poles.
Start again
from step 1.
The red Error
LED 13 flashes,
a continuous
alarm signal
sounds.
Battery clamps
(A) and (B)
are the wrong
way round. It
is caused by a
short circuit or
the battery is
leaking.
The red Error
LED 13 flashes
once, a
continuous alarm
is sounded and
then followed by
two short alarm
sounds.
Green Start LED
12 and the red
Error LED 13
flash alternately.
The connection
is correct After
1–2 seconds
only the green
LED 12 glows.
Carry on with
step 3.
3. Starting up
the vehicle.
1
B A
2. 1.

GB/IE/NI/CY/MT 19
As soon as the vehicle starts, remove the jump
lead 10 from the portable jump starter with power bank 1within
30 seconds and disconnect firstly the black battery clamp and
then the red clamp from the battery poles. Otherwise, it could
result in dangerous situations! Leave the vehicle engine running.
PLEASE NOTE: The button on the LED box 11 of the jump
lead has no effect and must not be used. It is only used for
troubleshooting purposes during the manufacture of the device.
zCharging mobile phones and tablets
Press the power switch 7.
Connect your mobile phone or tablet’s USB power cable to
the USB output (5 V /1 A 5/2 A 6) and then to your
mobile phone or tablet.
PLEASE NOTE: Charging is not possible if the portable
jump starter 1with power bank is being charged itself.
zUsing the 12 V DC output 8 A with
cigarette lighter adapter
Press the power switch 7.
Connect the 12 V/8 A cigarette lighter adapter 14 on the
12V DC output 8 A 3to your portable jump starter with
power bank 1und then connect it to your terminal device.
PLEASE NOTE: You will not be able to use the portable
jump starter with power bank 1if it is being charged.
ATTENTION: Only use the 12 V/8 A cigarette lighter
adapter delivered with your product 14. There is a risk of a short
circuit if you use third-party adapters.
zSwitch on lighting
Light mode
When switching on the LED lights 2, hold down the power
button 7for 3 seconds.

20 GB/IE/NI/CY/MT
Press and hold the power button 7again for 3 seconds to
turn the LED lights 2off again.
Flash mode
To switch on the LED light 2in flashing or SOS mode, first
press and hold the power switch 7for 3 seconds. Then the
LED light 2will be permanently lit.
Briefly press the power switch 7once again and the LED
light will switch to flashing mode.
Briefly press the power switch 7once again and the LED
light 2will switch to SOS mode. There will be 3 short
flashes, 3 long flashes and another 3 short flashes.
Briefly press the power switch 7once again to switch off
the LED light 2.
ATTENTION: Do not look directly at the LED lights 2as
this can damage your eyes.
PLEASE NOTE: It is not possible to turn on the light while
the portable jump starter with power bank 1is being charged.
zFAQs
Q: How can I switch the device off?
A: The device automatically switches off after 20 seconds of non
use. There is no provision for switching it off manually.
Q: How long does it take to fully charge a mobile
phone with the device?
A: With a charge level of 2500 mAh:
Approx. 2–3 hours if connected to the USB output
5V /1A 5. Approx. 1–2 hours if connected to the
USB output 5V /2A 6. Please note that if the device is
switched on, it will continually use battery power while
actually charging and this can extend the charging time.
Q: How long does the device’s rechargeable battery
pack last?
A: 3–6 months. However, we recommend charging the recharge-
able battery pack every 1–2 months.
Other manuals for UMAP 12000 B2
1
This manual suits for next models
1
Table of contents
Languages:
Other ULTIMATE SPEED Remote Starter manuals

ULTIMATE SPEED
ULTIMATE SPEED ULG 15 B4 User manual

ULTIMATE SPEED
ULTIMATE SPEED DIS-127 User manual

ULTIMATE SPEED
ULTIMATE SPEED UPBS 8000 A1 User manual

ULTIMATE SPEED
ULTIMATE SPEED ULG 17 A1 User manual

ULTIMATE SPEED
ULTIMATE SPEED UPBS 12000 A1 User manual

ULTIMATE SPEED
ULTIMATE SPEED UMAP 12000 A1 User manual

ULTIMATE SPEED
ULTIMATE SPEED ULG 17 A1 User manual

ULTIMATE SPEED
ULTIMATE SPEED ULG 17 A1 User manual

ULTIMATE SPEED
ULTIMATE SPEED UMAP 12000 B2 User manual

ULTIMATE SPEED
ULTIMATE SPEED 354273 2010 User manual