Ultrative A1 Instruction manual

Smart WiFi Battery Camera Quick User Guide
1. Packing list
A1 Packing list: A3 Packing list:
1pcs battery Camera, 1pcs bracket, 1pcs screw sets,
1pcs power adapter and USB cable; 1pcs User Guide
2. Product Details

No.
Camera key
Operation
1
Power Key
Press and hold for 5 seconds, it will power on/power off
2
Power Key
Press 1 second, it will wake up the camera
3
Reset Key
Press and hold for 5 seconds, it will restart
3. Set up Camera
3.1 Power on the camera
Press the power key, as beside picture shown and
and hold on for 5 seconds, it will power on
* NOTE: Note: The camera battery is not fully charged when it leaves the factory for safe delivery.
If it can not power on, please plug in DC5V 1A USB power adapter to do charge.
If 100% no power, it will take about 5 hours to charge full.
Important Note
Wi-Fi battery camera is not designed for 24/7 full capacity running or around-the clock live
streaming. It is designed to record upon motion events triggered by PIR sensor.
3.2 Plug in Power or TF Card
Plug in camera by DC5V 1A USB
Power adapter when needed,
and insert the TF Card, as
beside picture shown:
* NOTE: TF card max support 128GB
Recommended sanDisk brand Class 10
3.3 Smart phone Wi-Fi Connection
Bring the camera and phone within 1 to 3 feet (30 to 100 centimeters) of the router.
Note: Make sure smart phone is connected with your wireless router.
Please note our camera only works under 2.4G Wi-Fi, it doesn't support 5G Wi-Fi.

4. Install Cloudedge APP
4.1 Search “Cloudedge”in app store or google play, or scan below QR Code to
download and install on smart phone.
4.2 Register Account：
Launch the app from your smart phone and click the “SIGN UP” button. Follow the on-screen
instructions to register one account and login
5. Add Camera
Click and select “BATTERY CAMERA”, as shown below, there are two ways to add camera:
QR Code Scan Mode and AP Configuration Mode
* NOTE: If you select other camera type, you can not add battery camera.
5.1 QR Code Scan Mode

5.1.1 Input the WiFI SSID name and password
5.1.2 Follow the on screen instruction, put the QR code in front the camera lens 15cm.
5.2 AP Configuration mode
Follow the on screen instruction, as below picture shown:
If the scan is successful, the device will have
“bugu” sound prompt. Please click “Next”. If
you fail, please go back to the next step and
start again.

For Android phone, just follow the “NEXT”, and “CONNECT” to add camera.
For iPhone, added one more step, manually open the settings and select “STRN_XXXXXXXX” WiFi
to do WiFi configuration work.
5.3 View Help when unable to connect
When add camera in QR Code or AP mode, If problems or failed connection, please view help as
below pictures shown:

No.
LED Status
Camera Status
1
Slow blinking Red
Awaiting WiFi Connection
2
Fast blinking Red
WiFi Connecting
3
Solid on Red
Network is abnormal
4
Solid on Blue
WiFi Connected
No.
Description
Solution and operation
1
Unable to connect
1) Check your WiFi name and password
2) Ensure your WiFi is 2.4G, not support 5G
3) Ensure your camera and phone close to router
2
Reset
1) Press and hold the reset button for 5 seconds
2) Hear one “bugu” sound
3) Red light turns to slow blinking
3
Change to a new network
1) Press reset key to factory default setting
2) Re-connection
6. Device Menu

1. Add camera
12. Video Flip option
2. Camera type icon
13. Share option
3. Camera Name
14. Record button
4. Alarm Message icon, red dot means alarm
happened
15. Snapshot button
5. Live View button
16. Speaker button, hold it then can speak
6. Preview option
17. Microphone button
7. Camera Time
18. Playback option
8. Battery Volume
19. Recorded Alarm Video, click it to playback
9. Bit Rate
20. Play button
10. Network Signal Strength
21. Calendar option, click it to select date
11. Body Detection option, green color means
enabled
7. Adjust the Detecting Distance of the PIR Sensor
The default sensitivity of the PIR sensor is at “Mid” and the detecting distance is 6 meters (20ft).
If you want to adjust the sensitivity, please launch your App, and then click “Device Settings” ->
"Body Detection"

7.1 To reduce false alarms, please note that:
Do not install the camera facing any objects with bright lights, including sunshine, bright
lamp lights, etc.
Do not place the camera too close to a place where there frequently moving vehicles. Based
on numerous tests, the recommended distance between the camera and vehicle is 15
meters (55ft).
Stay away from the outlets, including air conditioner vents, humidifier outlets, the heat
transfer vents of the projectors, etc.
Do not install the camera facing the mirror
Keep the camera at least 1 meter away from any wireless devices, including Wi-Fi routers
and phones, in order to avoid wireless interference.
Sensitivity
Detecting Distance
(For moving
and living things)
Low
Up to 4 meters (13ft)
Medium
Up to 6 meters (20ft)
High
Up to 8 meters (26ft)
*NOTE: Higher sensitivity offers longer
detecting distance, but it would lead to
more false alarms. You are advised to set
up the sensitivity level to “Low” or
“Medium” when you install the camera
outdoors.
Important Notes for Reducing False Alarms

7.2 Cover the Monitoring Area
When installing the camera, it’s not suggested to make the PIR sensor vertically face the moving
object, otherwise it may not detect the motion events. It is suggested to make the angular
between PIR sensor and detected object larger than 10 degree.
FYI:
The PIR sensor’s detecting distance: 20ft (in default)
The PIR sensor’s detecting angle: 120°(H)
8. Camera Installation
8.1. Table Mount
8.2 Wall Mount: Fix the iron ball bracket to the wall with screws, and then magnetize the camera
to the iron ball. Installation is very convenient and also easy to adjust the angle