Unique Lighting Systems SMRT Logic LPLUS User manual

Connect Hardware
1
1. Connect Ethernet cable from your internet router or
switch to the port on the back of the LPLUS.
2. Plug in the AC adapter.
3.
solid green.
Register
2
1. Next, register your LPLUS.
Point browser to www.smrtscape.com.
2. Click the Register link.
3. Register.
4.
be taken to the SMRTscape website. Click the Complete
Registration link.
5. You will be taken to the sign in page.
Enter e-mail address and password
then click Sign In.
Quick Reference Setup Guide
Setup in 3 Easy Steps!
RegisterConnect Hardware
1 2 3
©2020 Unique Lighting Systems®Form Number 373-0864 Rev. B
Thank you for purchasing Unique Lighting Systems’ SMRT Logic (LPLUS) Internet Gateway.
The SMRT Logic® systemallows users to intuitively set up and control their lighting systems from
anywhere they have internetaccess via the web or the Unique Lighting SMRT Logic Lighting app.

3
Add Location
After signing in, you need to add the location of the LPLUS.
1. Click + Add a Location.
2. Fill out the Name and Description fields.
3. On the Google Maps map (Figure 1), enter desired
4. Click Submit.
Add Scene
A default scene is added to the LPLUS setup screen.
The default scene (“Scene 1”) turns on every day of the
week from Dusk to 10pm. There are two ways to edit scene
elements:
Scene name, description and image:
1. Click the “+” icon.
2. Enter scene name and
description. You can
also upload an image
to replace the “default”
image.
Scene days of the week and run times:
1. Click the grey cog wheel by scene name (Figure 2).
2. Select which days of the week the scene will run and the
times of operation for the specified days (Figure 3).
It is possible to have an A Schedule and a B Schedule
for each scene. For example, one might want security
lights to stay on longer on Friday and Saturday nights.
3. Click Submit.
To Add a Scene
To add additional scenes to the LPLUS (see system diagram).
1. Click the + Add a Scene button.
2. Follow same steps as above. Click Create Scene.
To Delete a Scene
1. Press the trash can icon next to the Scene name.
2. Click the “Yes” button to confirm.
Manual Scene Operation
To manually turn a scene on or off
click green “Play” button on the
scene and set the desired time
(in minutes) then press
“Turn On” button.
Adding the LPLUS
Now add the LPLUS to your SMRT Logic account.
1. At the computer, click the
yellow “Devices” light bulb,
and then click the “Add Gateway”
button. Follow the promps to
add your gateway.
2. Type in the LPLUS
ID. This is the “SUID”
number on the sticker on
the bottom of the unit.
3. Enter the Security Key
also found on bottom.
Click Submit.
4. The LPLUS should now be added to the system.
Figure 2
Figure 3
Figure 1
Figure 3
Figure 2

Add LPCU-As to the LPLUS
At this time you can add LPCU-As.
1. Press the Activate Discovery Mode button.
2. Press the button on the front of the LPCU-A when
prompted.
3. After a few seconds, the LPLUS should detect
the LPCU-A. Give the detected LPCU-A a description
and assign it to the desired scene.
4. Press the Submit button when done.
5. Repeat steps 1-4 for each LPCU-A to add.
To add an LPRO, click Activate Discovery Mode then
Hardware on the Location page.
Edit LPCU-A Equipment
Click the blue pencil icon to edit LPCU-A description or
change scene assignment.
Delete LPCU-A Equipment
Click the blue trashcan icon to delete a LPCU-A.
Update the Firmware
LPCU-A, a Manage Firmware command will be displayed
under ‘Hardware’ on the Location screen. Click the link to
update hardware. Select the Device(s) and click Update
Firmware to start.
Support
Model Name: SMRT Logic
Model Number: LPLUS
Dimensions: 4.4” x 3.1” x 1.2” without antenna
Unit Weight: 3.4oz (95g) without accessories
Power: 5Vdc, 1A
Port Speed: 10/100 Mbps
Operating Temp: 32 to 104°F (0-40°C)
Storage Temp: -4 to 140°F(-20 to 60°C)
Operating Humidity: 10 to 80% RH, non-condensing
FCC Statement - FCC ID: OF7SCG
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
In order to maintain compliance with the FCC RF exposure guidelines, this
device should be installed and operated with a minimum distance of 20cm
between the radiator, and the body of the operator and/or nearby persons.
compliance could void the user’s authority to operate this device.
Permitted Low Gain Dipole Whip Antenna (2dBi).
IC Statement - IC: 3575A-SCG
1. Under Industry Canada regulations, this radio transmitter may only
operate using an antenna of a type and maximum (or lesser) gain
approved for the transmitter by Industry Canada. To reduce potential radio
interference to other users, the antenna type and its gain should be so
chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more
than that necessary for successful communication.
Conformément à la réglementation d’Industrie Canada, le présent
émetteur radio peut fonctionner avec une antenne d’un type et d’un gain
maximal (ou inférieur) approuvé pour l’émetteur par Industrie Canada.
Dans le but de réduire les risques de brouillage radioélectrique à l’intention
des autres utilisateurs, il faut choisir le type d’antenne et son gain de sorte
que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas
l’intensité nécessaire à l’établissement d’une communication satisfaisante.
2. This radio transmitter has been approved by Industry Canada to
operate with the antenna types listed below with the maximum permissible
gain and required antenna impedance for each antenna type indicated.
Antenna types not included in this list, having a gain greater than the
maximum gain indicated for that type, are strictly prohibited for use with
this device.
catégorie I) a été approuvé par Industrie Canada pour fonctionner avec
les types d’antenne énumérés ci-dessous et ayant un gain admissible
maximal et l’impédance requise pour chaque type d’antenne. Les types
d’antenne non inclus dans cette liste, ou dont le gain est supérieur au gain
maximal indiqué, sont strictement interdits pour l’exploitation de l’émetteur.
Antenna Approved/Antenne approuvé
Type/Type Max. Gain/Max. Gain Impedance/Impédance
Dipole Whip 2.0 dBi 50 Ω
3. This device complies with Industry Canada licence-exempt RSS
standard(s). Operation is subject to the following two conditions: (1) this
device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation of
the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables
aux appareils radio exempts de licence. L’exploitation est autorisée aux
deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage,
et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique
subi, même si le brouillage est susceptible d’en compromettre le
fonctionnement.
4. In order to maintain compliance with the IC RF exposure guidelines, this
device should be installed and operated with a minimum distance of 20 cm
between the radiator, and the body of the operator and/or nearby persons.
IC, ce
dispositif doit être installé et exploité avec une distance minimale de 20 cm
entre le radiateur et le corps de l’opérateur ou à proximité de personnes.
FCC and IC Statements
Visit www.uniquelighting.com for FAQ and detailed instructions.
To submit a help ticket, click on the Contact link then the
Submit a Ticket link.

Unique Lighting Systems®
www.uniquelighting.com
5825 Jasmine Street
Riverside, CA 92504
T 800-955-4831
F 800-955-9852
SMRTscape website
SMRTscape Lighting
mobile app
LPLUS
LPCU LPCU LPCU LPCU LPCU LPCU
SMRTscape servers
SMRT Logic
Scene 1: Lighting
SMRT Logic
Scene 2: Fountain
SMRT Logic
Scene 3: Landscape
Problem Cause Solution
LED remains orange LPLUS unable to get an
IP address from the network’s DHCP
server.
addresses. If needed, an LPLUS can be manually
Advanced LPLUS network setup on the website.
LED blinks green LPLUS unable to reach the internet.
same Ethernet wire if possible.
Troubleshooting
Control your lighting system
from any internet-enabled device.
©