UNIS Rocket School Bus User manual

OperationManual
www.universal-space.com

Rocket School Bus manual
1
Non-technical personnel who do not have technical knowledge and
Expertise should refrain from performing such work that this manual
require or perform tasks which are not explained in this manual.
Failing to comply can cause severe accidents such as electric shock or
other serious injuries. All repairs must be performed to original
manufacturer specifications.
WARNING: To reduce the risk of fire, electric shock or personal injury,
unplug or disconnect the machine from the power supply before
servicing.
CONTENT
Important Safety Instructions....................................................................2
1. SPECIFICATIONS...................................................................................... 4
2. PACKAGE CONTENTS.............................................................................. 5
3. PART NAME............................................................................................... 6
4. SET UP & INSTALLATION ........................................................................ 7
5. HOW TO PLAY ........................................................................................ 10
6. GAME SETTINGS.....................................................................................11
7. ERROR MESSAGE ...................................................................................11
8. MAINTENANCE & INSPECTION.............................................................12
9. OVERALL CONSTRUCTION.....................................................................13

Rocket School Bus manual
2
Thank you for purchasing Rocket School Bus from Universal Space.
We hope you enjoy the product.
This manual contains valuable information about how to operate and maintain
your game machine properly and safely. It is intended for the owner and/or
personnel in charge of product operation. Carefully read and understand the
instructions.
If you need any help during installation and setup please utilize this manual and
troubleshooting guide. If the product fails to function properly, non-technical
personnel should under no circumstance attempt to service the machine. Contact
your distributor or manufacturer for help.
Before use, please read IMPORTANT SAFETY INSTRUCTIONS.
IMPORTANT SAFETY INSTRUCTIONS
To ensure the safe usage of this product, carefully read and
understand these instructions before operating your game.
Save these instructions for future reference.
Use this product only as described in this manual. Other uses not recommended
may cause fire, electric shock or personal injury. Unplug the game from the outlet
when not in use, when moving from one location to another, and before
cleaning/servicing.
Explanations which require special attention are indicated by signs of warning.
Depending on the potential hazardous degree, the terms: NOTE, NOTICE, and
WARNING are used.
NOTE: A NOTE indicates useful hints or information about product usage.
NOTICE: A NOTICE indicates potential damage to product and how to avoid the
problem.
WARNING: A WARNING indicates a potential for product damage or serious
personal Injury.
It is important to understand the meaning of the following HAZARD SIGNS before
continuing:
High Voltage and Shock Hazard:
High voltage can cause electric shock.
Turn off/unplug power before servicing.
High Temperature Hazard:
This part may cause scalding.
Do not touch. Surface may be hot.

Rocket School Bus manual
3
No Touching Hazard:
This part may be hot or can cause electric shock.
Do not touch.
Use the following safety guidelines to help ensure your own personal
safety and to help protect your equipment and surrounding environment from
potential damage.
This product is an indoor game machine. Do not install
outdoors.
Avoid installing in the following places to prevent fire, electric shock,
injury and/or machine malfunctioning:
Places subject to rain/moisture, or places subject to high humidity.
Places subject to direct sunlight, or places subject to extremely hot or cold
temperatures to ensure that it is used within the specified operating range.
Places where inflammable gas may be present or in the vicinity of highly
inflammable/volatile chemicals or items that can easily catch fire
On unstable or sloped surfaces. The machine may topple or cause
unforeseen accidents.
Vicinity of fire exits, fire extinguishers etc that may block/prevent safety
measures
IMPORTANT NOTE:
ALL REPAIRS MUST BE DONE TO ORIGINAL MANUFACTURER
SPECIFICATIONS. FAILURE TO DO SO VOID ALL WARRANTIES AND
OPERATOR ASSUMES ALL RISKS.
Note: The contents of this manual may be updated without notice.

Rocket School Bus manual
4
1. SPECIFICATIONS
For 110V area
Rated power supply: AC110V 60Hz
Min. Power consumption: 100W
Max. Power consumption: 430W
Dimensions: W1930×D1030×H1650 (mm)
Weight: Approximately 200kg
NOTICE: After turning off the game, please wait at least 1
minute before restarting again.
Note: Game parameters are subject to change without notice.
NOTICE: After turning off the game, please wait at least 1 minute
before restarting again.
For 220V area
Rated power supply: AC220V-240V 50Hz
Min. Power consumption:100W
Max. Power consumption: 430W
Dimensions: W1930×D1030×H1650 (mm)
Weight: Approximately 200kg

Rocket School Bus manual
5
2. PACKAGE CONTENTS
Open the package and make sure all the items are included:
1 x Body Assembly
Following accessories
NO. Part number Code Name SPEC. Qty Illustration
1 R113-467-000 25300171002 Key 171 3
2 R113-418-000 21901000014 Fuse
Φ6×30mm
T10A
250VAC
1
3 R113-468-000 41440000050 Manual manual 1
4 R113-469-000 25300172002 Key 171B 1
If any items are found to be missing, please contact your sales
representative for help immediately.
NOTE: Part models are subject to change without notice.

Rocket School Bus manual
6
3. PART NAME
Front Seat
Motion Base
Fiberglass
School Bus
Headlight
Speaker
Marquee
Back Seat

Rocket School Bus manual
7
4. SET UP & INSTALLATION
This product is an indoor game machine. Do not install
outdoors.
Refer to IMPORTANT SAFETY INSTRUCTIONS (Pg. 2) for places to avoid
Place the unit on a dry level surface
Ventilation openings in the back of the unit must not be obstructed by objects
or by wall.
4.1 Play Zone
This machine requires space for playing and for maintenance as shown below.
Leave space around the game upon installation:
Play Zone
Passenger
Way

Rocket School Bus manual
8
4.2 Level Adjustment
Install this machine on a flat surface. Adjust levers to lift casters off the ground to
level the game. If the game is installed on an unsuitable floor, it could cause
game malfunction.
To secure the game, adjust the Leveler down until it touches the floor, lifting the
casters off the ground by 5mm. Repeat the same for all levelers.
4.3 Transporting the Game
If you need to move the game, adjust the levelers back to an “up” position so the
casters touch the ground.
NOTICE
Be careful not to damage the machine during transport.
The machine should be handled with care when bringing it down from a
higher level.
Always unplug the game before moving.
Keep the machine in upright position during transport.
For longer distance transport, package the game properly to prevent
damages
Leveler Caster
About 5 mm
Move Fix
Make sure the machine is level with the ground and all the
adjustable legs should stick to the floor closely.
NOTICE
Leveler Caster
Move

Rocket School Bus manual
9
4.4 Connecting Power
WARNING: Check the voltage rating before you connect the
equipment to an electrical outlet to ensure that the required voltage
and frequency match the available power source. Please refer the
label of the machine.
Do not plug the equipment power cables into an electrical outlet if the
power cable is damaged.
Avoid putting many loads on one electrical outlet as it could generate heat
and fire resulting from overload.
Connect the grounding conductor to the earth terminal (GND):








WARNING
Ensure no heavy objects rest on the power cord. Check to make sure the game
cabinet does not sit on the power cord as this could damage the cord and become
hazardous.
To disconnect the game, grip the plug and pull it from the wall outlet. Never pull
by the cord.
To prevent electric shock, do not touch the power plug when hand is wet.
Ensure that nothing rests on the power cord and that it is not located where it can
be stepped on or tripped over.
Power socket
Power outlet
Power plug
Power cord
Power plug

Rocket School Bus manual
10
5. HOW TO PLAY
5.1 How To Play
Control the steering wheel during the game play.
5.2 Game Flow
Insert coin
Game starts
and ride starts
to move
Press buttons
to have
effects
Game over
ShifterSteering wheel
Button

Rocket School Bus manual
11
6. GAME SETTINGS
SW1
Item Content SW11 SW12
Coin
per
game
1 ON ON
2 off on
3 on off
4 off off
Item Content SW15 SW16 SW17
Fixed
Ticket
1 on on on
2 off OFF ON
3 on on off
5 off off off
8 on on on
12 off off on
15 on on off
0 OFF OFF OFF
*Note: The above settings are subject to change without notice.
7. ERROR MESSAGE
7.1 E rror Me ss age
E01: Coin mech error E08: Initial position detect error E13 Shifter D error
E03: Settings button error E09: Button 1 error E14 Shifter P error
E04:
T
est button error E10: Button 2 error E16 Ticket signal error
E05: Reset button error E11: Button 3 error
7.2 Tro uble S ho oti ngs
Please confirm whether every connector connected tightly.
Troubles Cause Methods
Cannot start Frame assembly connector fall off
Please plug in connector tightly
Frame assembly fault Please contact with dealer
Power cutting Circuit protector make power SW
in cutting state
Please turn on power SW again. If
appeared again and again, machine
has anomaly. Please contact with
dealer
Coin mech. no
reaction
Coin mech. fault Change coin mech.
Coin mech. signal cable loosen Check coin mech. signal line loosen or
not
IO control board fault Change IO board
Item Content SW13 SW14
Game
time
(s)
30 on on
45 OFF ON
60 on off
90 off off
Item Content SW18
Demo
music
ON on
OFF OFF

Rocket School Bus manual
12
8. MAINTENANCE & INSPECTION
8.1 Safety Check
Check the points listed before operating the machine. These checks are necessary for safe
machine operation:
1. Try to run the game before operation each day.
2. Conduct monthly routine checks of game components ensure good working condition
3. Check the machine regularly for dust and clean when necessary.
Note: Parts and components require preventative maintenance to be kept running smoothly
8.2 Handling Precautions
When installing or inspecting the machine, be very careful of the following points and
pay attention to ensure that the player can enjoy the game safely.
Non-compliance with the following points or inappropriate handling running counter to
the cautionary matters herein stated can cause personal injury or damage to the machine
• Before servicing the machine, be sure to turn power off. Servicing without turning the
power off can cause electric shock or short circuit.
• To avoid electric shock or short circuit, do not plug then unplug the power quickly
• Do not expose power cords and earth wires, these are susceptible to damage.
• Damaged cords and wires can cause electric shock or short circuit and should be
replaced immediately.
• When or after installing the product, avoid pulling the power cord to prevent
unnecessary wear and tear. Use the power button to disconnect power.
• In case the power cord is damaged, ask for replacement through where the product was
purchased from or replace locally. Continued usage of damaged cord can cause fire,
electric shock or leakage.
• Perform grounding appropriately. Inappropriate grounding can cause electric shock.
• Use fuses that meet specified rating. Fuses exceeding can cause an electric shock.
• Should a problem occur, turn off the power immediately and stop operating the machine.
Unplug the power cord of the service outlet. Operating the machine without correcting the
problem may cause a fire or injuries.
• Insert the power plug securely into the outlet. Poor contact may cause overheating,
resulting in fire or burns.
• To ensure the warning labels attached on the machine are visible and legible, install the
machine in a well-lit location, and keep the labels clean at all times. Make sure the labels
are not hidden behind other game machines.
WARNING

Rocket School Bus manual
13
9. OVERALL CONSTRUCTION
9.1 Mechanical Part
9.1.1 Main Assembly
No. Part No. Code No Name SPEC./Material Qty
1 R113-314-000 20251301068 Skirt mounted plate C Q235 2
2 R113-101-000 20113010053 C flat washer Q235 28
3 R113-102-000 20101010029 Cross recessed pan head screw Q235 28
4 R113-009-000 29951301013 Protected frame assy. Assembly 1
5 R113-313-000 20251301067 Skirt mounted plate B Q235 2
6 R113-001-000 29951301001 Drive mechanism Assembly 1
7 R113-312-000 20251301066 Skirt mounted plate A Q235 4
8 R113-318-000 20251301071 Protected plastic PVC 2
9 R113-103-000 20101048007 Hexagon flat round head screws Q235 4
10 R113-004-000 29951301A004 Cabinet mechanism Assembly 1

Rocket School Bus manual
14
9.1.2 Drive Mechanism
No. Part No. Code No. Name SPEC./Material Qty.
1 R113-003-000 29951301003 Movable frame Assembly. 1
2 R113-237-000 20251301040 Connected rod 45# 1
3 R113-105-000 20105000024 A type circlip for shaft Q235 1
4 R113-228-000 20251301031 Connected part Black 1
5 R113-403-000 20106000057 Deep groove ball BD. 6205zz 2
6 R113-106-000 20105000197 A type circlip for shaft Q235 3
7 R113-107-000 20105000210 A type circlip for hole Q235 2
8 R113-401-000 23405010010 Motor YL7124-220V
370W 14rev/min
1
9 R113-108-000 20104040030 Hexagon bolt M8×30 1
10 R113-109-000 20113000005 Standard spring washer 8×2h 24
11 R113-110-000 20113000051 C flat washer 8×1.6h 24
12 R113-111-000 20102000013 Hexagon nut Q235 8
13 R113-229-000 20251301032 Eccentric shaft 40Cr 1
14 R113-402-000 20115080006 General A type flat key Q235 1
15 R113-236-000 20251301039 Motor mounted bracket δ12mm/δ3mm 1
16 R113-112-000 20104000008 Hexagon nut Q235 4
17 R113-113-000 20113000102 Standard spring washer Q235 4
18 R113-114-000 20113000052 C flat washer 4
19 R113-235-000 20251301038 Fuse mounted plate δ2 1
20 R113-234-000 20251301037 Hold cable plate δ2 1
21 R113-233-000 20251301036 GND plate Metal 1

Rocket School Bus manual
15
No. Part No. Code No. Name SPEC./Material Qty.
22 R113-406-000 25501000063 Fixed caster 3-3688-52 2
23 R113-115-000 20104100030 Hexagon bolt Stainless steel 16
24 R113-230-000 20251301033 Reset plate Q235 1
25 R113-104-000 20101000024
Cross recessed pan
head screw M4×12 4
26 R113-231-000 20251301034 Reset SW bracket Q235 1
27 R113-421-000 21501000004 Sensor E3F-DS10C4/
NPN-NO 1
28 R113-226-000 20251301029 Connected shaft φ35x120 2
29 R113-116-000 20107000116 Cotter d5×30 2
30 R113-404-000 20106130158
Spherical surface ball BD.
with seat NAP206 2
31 R113-117-000 20104031004 Hexagon bolt Q235 4
32 R113-118-000 20113000004 Standard spring washer Q235 4
33 R113-119-000 20113000054 C flat washer Q235 4
34 R113-405-000 25501000062 Movable caster 3-3689-52 2
35 R113-232-000 20251301035 Leveller Q235 2
36 R113-002-000 29951301002 Base frame Assembly 1
37 R113-227-000 20251301030 Shaft sleeve Q235 2

Rocket School Bus manual
16
9.1.3 Cabinet Part

Rocket School Bus manual
17

Rocket School Bus manual
18
No. Part No. Code No. Name SPEC./Material Qty
1 R113-005-000 29951301005 Cabinet Assembly 1
2 R113-006-000 29951301007 Steering wheel assy. Assembly 1
3 R113-120-000 20101010010
Cross recessed sunk
head screw Q235 4
4 R113-708-000 20551301B008 Control panel plastic Clear plastic 1
5 R113-121-000 20101000007
Hexagon flat round
head screws M4×20 86
6 R113-122-000 20103100009
Cross recessed pan
head self-tapping screw Stainless steel 60
7 R113-123-000 20101000021
Cross recessed pan
head screw M3×16 36
8 R113-124-000 20102030043 Hexagon nut Q235 36
9 R113-242-000 20651301001 Rear upper light bracket PVC 1
10 R113-704-000 20551301B004 Rear upper light plastic Clear plastic 1
11 R113-243-000 20651301002 Rear big light bracket 1
12 R113-244-000 20651301003 Rear small light bracket 1
13 R113-705-000 20551301005 Rear big light plastic Clear PVC 1
14 R113-310-000 20251301064 Fan mounted plate Q235 1
15 R113-156-000 20101010049 Cross recessed pan
head screw Q235 4
16 R113-245-000 20651301004 Big taillight cover Red clear plastic 2
17 R113-125-000 20101000101 Cross recessed pan
head screw Q235 36
18 R113-246-000 20251301044 Big taillight cover bracket Metal 4
19 R113-247-000 20451301002 Big taillight holder Fiberglass 2
20 R113-126-000 20101000052 Cross recessed pan
head screw 10
21 R113-248-000 20651301005 Small taillight cover Yellow clear plastic 2
22 R113-249-000 20251301045 Small taillight cover bracket Metal 6
23 R113-250-000 20251301046 Wheel mounted bracket Q235 4
24 R113-127-000 20103100005 Cross recessed pan
head self-tapping screw Stainless steel 26
25 R113-251-000 20651301006 Wheel plastic White plastic 1
26 R113-252-000 20651301007 Right side light cover D White plastic 1
27 R113-253-000 20651301008 Light belt mounted plastic PVC 1
28 R113-255-000 20651301010 Right side light cover C White plastic 1
29 R113-256-000 20651301011 Right side light cover B White plastic 1
30 R113-257-000 20651301012 Light belt mounted plastic B PVC 1
31 R113-327-000 26000057001 Speaker light cover Clear PC 4
32 R113-311-000 20251301065 Speaker light bracket Metal 4

Rocket School Bus manual
19
No. Part No. Code No. Name SPEC./Material Qty
33 R113-128-000 20101000025 Cross recessed pan
head screw M4×16 20
34 R113-326-000 26000056000 Coin door assy. Assembly 1
35 R113-129-000 20104000018 Big step bolt M4×30 8
36 R113-306-000 20251301061 Counter bracket Metal 1
37 R113-130-000 20102030011 Hexagon flange nut Q235 8
38 R113-262-000 20651301013 Right side light cover A White plastic 1
39 R113-263-000 20651301014 Light belt mounted
plastic C PVC 1
40 R113-264-000 20251301051 Top light bracket cover Q235 1
41 R113-265-000 20251301052 Top light bracket Q235 1
42 R113-131-000 20101108005 Hexagon flat round
head screws Stainless steel 2
43 R113-266-000 20651301015 Top light bottom cover ABS 3
44 R113-267-000 20251301053 Top light socket Q235 3
45 R113-268-000 20651301016 Top light cover White plastic 3
46 R113-270-000 20651301018 Top side light Red clear plastic 3
47 R113-702-000 20551301B002 Top marquee light Clear plastic 1
48 R113-271-000 20651301019 Top marquee bracket PVC 1
49 R113-272-000 20651301020 L headlight Yellow clear plastic 1
50 R113-701-000 20551301B001 Head decal Clear plastic 1
51 R113-273-000 20651301021 Head light cover bracket PVC 1
52 R113-274-000 20651301022 Head bottom light cover Yellow clear plastic 2
53 R113-275-000 20651301023 Front small light cover White plastic 1
54 R113-276-000 20651301024 Front small light
mounted plate PVC 1
55 R113-277-000 20651301025 R headlight cover Yellow clear plastic 1
56 R113-278-000 20651301026 Small cooling cover White plastic 6
57 R113-279-000 20651301027 Small cooling light bracket PVC 6
58 R113-280-000 20651301028 L side cover A White plastic 1
59 R113-281-000 20651301029 Light belt mounted plate D PVC 1
60 R113-282-000 20651301030 L side cover B Yellow clear plastic 1
61 R113-283-000 20651301031 Light belt mounted plate E PVC 1
62 R113-284-000 20651301032 L side light bracket PVC 1
63 R113-703-000 20551301B003 Left side light Clear plastic 1
64 R113-285-000 20651301033 L side light cover C White plastic 1
65 R113-286-000 20651301034 Light belt mounted plate F PVC 1
66 R113-287-000 20651301035 L side light cover D White plastic 1
67 R113-288-000 20651301036 Light belt mounted plate G PVC 1
68 R113-289-000 20651301037 Back top light cover White plastic 2