THZ-100 THER OSTAT
Welcome To Your THZ-100 Thermostat
Congratulations on your purchase of this THZ-100 Thermostat from
URC. Enjoy the full functionality of a stand-alone thermostat
coupled with the ability, when used with a Total Control system, to
be controlled from any user interface in the system. No more
shivering under the covers, dreading to dare the inevitable cold on
the way to the shower; grab the remote and make it nice and toasty,
before removing the blanket!
Some of the advanced, and unique features found on the THZ-100
are:
Optional Wired Sensor
Easily add an additional sensor to the thermostat by purchasing the
optional wired sensor. With the ability to temperature average
between the sensor and the main unit, or simply take the place of
the main unit’s on-board sensor, you can increase both efficiency
and accuracy of temperature readings.
Intelligent Comfort Recovery
Every good thermostat has the ability to set heating and cooling
schedules, but if you wake up at 7:30am, setting your heat to come
on at 7:30am means waking up to an uncomfortable home while
your system reaches your desired temperature. With Intelligent
Comfort Recovery, the THZ-100 monitors the current temperature
of your home and determines the amount of time it will take to
reach your desired temperature at the desired time. Then, it slowly
and more efficiently heats or cools to the new set point.
Security Code
Perfect for most commercial uses, and even for some homes where
people have the need to ensure that only authorized people should
have access to the THZ-100. Easily program your new thermostat
with a 4-digit security code to make sure that only people with the
code can access the thermostat.
Total Control Peripheral
Perhaps the best benefit is the THZ-100’s complete integration into a
Total Control home system. When used with URC’s Total Control
system, the thermostat control can be accessed from any of the
system’s interfaces (dependent upon the system programmer). With
the ability to control all of the THZ-100s in the home, it is also easy
to incorporate heat/cool set points into various Automation
Activities. Although the possibilities are endless, imagine a
Goodnight button that would turn off your theater, turn off all the
lights and bring the THZ-100 to the chosen set point!
Page 1
