uniview technologies NSW081P User manual

The Switch you purchased contains following items
You can toggle switch to decide whether to use Extend or not (Note: After toggling the
switch, you need to reboot the device to enable or disable this function):
ON: Extend mode is enabled. All downlink ports are separated, and the network
transmission distance is extended to 250 meters.
OFF: Extend mode is disabled (switch to standard switching mode). All ports can
communicate with each other.
Item
Name
Quantity
Unit
1
Switch
1
Set
2
Power Adapter
1
Piece
3
Power cable
1
Piece
4
Plastic-foot
4
Piece
5
Quick Installation Guide
1
Piece

●Unplug power before cleaning. Do not wipe the switch with wet cloth. Do not clean
with liquid.
●Keep the switch away from water or damp. Protect against ingress of water or damp.
●Keep a clean environment. Buildup of dust causes electrostatic absorption and leads to
shortened lifetime and malfunction.
●Keep clear ventilation. Do not stack devices. The switch uses natural cooling to
dissipate heat.
●Verify that the input voltage conforms to specifications.
●Please don't plug in and pull out the DC plug when power turns on, we suggest that you
insert DC plug fist, then insert the AC power socket
●To avoid the risk of electric shock, never open the chassis when the switch is still
operating. Open with caution even when power is not applied.
To realize the safe installation and operation,
Installed on desktop
we suggest you:
A. The mounting surface is capable of supporting at
least 1 KG weight.
B. The main power outlet is at least one meter away
from the switch.
C. The power cable is securely connected to the outlet.
D. Allow sufficient space for heat dissipation, and no
heavy object is placed on the switch.
LED
Panel
Status
Meaning
Power LED
PWR
Green
Power connected
Off
Power disconnected or power failure
Status LED
Link/Act
Green
Link established
Flashing
Sending/receiving data
Off
No link
POE LED
POE Status
Orange
Supplying power
Off
Not supplying power

1. Verify that the power supply complies with the specifications marked on the switch.
2. Connect the power adapter to the DC interface of the switch first, and then connect the
power adapter to the mains.
3. Check that the PWR indicator on the switch is lit, which means power is connected
correctly.
●This device is a class A product and may cause radio interference, Take measures if
necessary.
Items
Specification Description
Dimensions
(L x W x H)
235*110*27mm
Fixed Port
●8×10/100Base-TX auto-sensing Ethernet PoE ports
●1×Gigabit combo uplink port (SFP (default)and RJ45)
Cable type
●10Base-T: Cat 3/4/5 UTP, maximum transmission distance: 100m.
●100Base-TX: Cat 5/6 UTP, maximum transmission distance: 100m.
●1000Base-T: Cat 5/6 UTP, maximum transmission distance: 100m.
●1000Base-SX: 62.5μm/50μm multimode fiber, maximum
transmission distance: 550m.
●1000Base-LX: 62.5μm/50μm multimode fiber, maximum
transmission distance: 550m. 10μm single-mode fiber, maximum
transmission distance: 5000m.
Input voltage
DC 54V
PoE Power
Port: Max 30 W.
Total: Max 120 W.
Operating temperature
0℃～40℃
Operating humidity
5%～95%, non-condensing
Heat dissipation
Natural Cooling

●This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and ( 2) this device
must accept any interference received, including interference that may cause undesired
operation.