UP 9651EDGE05 User manual

Quick Start Guide
Cable Kit
P/N: 9651EDGE05
User Manual for assembling Cable Kit for UP Xtreme Edge
Computing System with Whiskey Lake CPU
Revision:
02
Update Date:
14 February 2020
Prepared For:
UP Shop User
AAEON
Prepared By:
WendyLee
李宏芸
AAEON Europe

Copyright © AAEON
Page 2of 8
Revision History
The following table contains the information regarding the
history and revisions of this living document.
Version
Date
Contributor
Changes Description
N/A
Document Attributes
The following table contains the list of files that are
associated with this living document.
Filename
Description
N/A

Copyright © AAEON
Page 3of 8
S21D305011
S1A5004050
S1ZC002110
Package List
Item NO.
Description
Quantity
1703401600
MCU Cable,160mm
1
1703401301
GPIO Cable,40Pin Hat,130mm
1
1709103100
Debug Cable,310mm
1
1701100180
COM Cable,150mm
2
S1A5004050
Screw for MCU cable and GPIO cable
4
S21D305011
Screw for COM Cable
4
S1ZC002110
Screw for Debug Cable
1

Copyright © AAEON
Page 4of 8
CABLE Assembly STEP
1.Take the MCU cable(1703401600) to go through the
chassis and connect the pin head to CN25 (STM32
connector)
1703401600

Copyright © AAEON
Page 5of 8
2.Take the PCB and turn the CPU side downward and put
it in the chassis

Copyright © AAEON
Page 6of 8
3.Take another GPIO cable (1703401301) to go through
the Chassis and connect the pin head to the 40pin HAT
4.Take the two com ports cables (1701100180) and
connect the pin head to COM1 and COM2
5.Take debug port cable (1709103100) and connect the
pin head to CN16
1703401301
1701100180
1709103100

Copyright © AAEON
Page 7of 8
6.screw the both COM cables and MCU cable on the
chassis.
S21D305011
S1A5004050

Copyright © AAEON
Page 8of 8
6.screw the GPIO cable and screw the debug cable with
the ring(S1ZC002110) on the chassis.
S1ZC002110
S1A5004050