1300 79 80 50 | www.uplifting.com.au
Setup Steps:
The Goanna has 3 main parts (2 legs and 1 tray). Each leg has 3 segments. The legs are adjusted by
pressing in on the silver adjustment buttons that are located between each segment.
Product Code: UP-G LR
Adjusting the legs
Segment 1
1. Locate the round silver adjustment button (which is flat against the surface) on
segment 1.
2. Press and hold this button firmly with one hand while pushing the leg segment
downwards. Ensure the button clicks into place.
Take note of the degrees you have set for this segment as you will repeat these steps
for the opposite leg.
Segment 2
1. Locate the round silver adjustment button on segment 2.
2. Press and hold this button firmly with one hand while pushing the leg segment
downwards. Ensure the button clicks into place.
Take note of the degrees you have set for this segment as you will repeat these steps
for the opposite leg.
Segment 3
1. Locate the round silver adjustment button on segment 3.
2. Press and hold this button with one hand firmly, and move the tray to your desired
location. Ensure the button clicks into place.
Take note of the degrees you have set for this segment as you will repeat these steps
for the opposite leg.
