Please follow the below installation steps
Please check the following items before installation, if it is missing, please contact the
dealer .
4 ports PoE Ethernet Switch 1pcs
Power adaptor 1 pcs
AC power cable 1 pcs
Accessory 1 pcs
User manual 1 pcs
1)
damage the transmission equipment;
2) Use network cable connect PoE IP camera and 1～4 downlink ports of product respectively;
4) Connect power adapter;
5) Check if the installation is correct, equipment is in good condition, the connection is stable,
then power on for system;
6) Ensure the Ethernet equipment with power on can work properly.
Please turn off the signal power and display device power before installation, or it will
3) Use a network cable connect equipment uplink port and NVR or computer;
Installation steps
Feature
4 Ports PoE Ethernet Switch
4 Ports PoE Ethernet Switch
User Manual
12
4 ports PoE Ethernet Switch is a security surveillance Ethernet Switch which aims at Ethernet
high definition surveillance and security system. The product fully combines the characteristics
of security surveillance, provides fast packet forwarding ability and abundant backplane
bandwidth, which ensures clear image and fluent transmission. ESD and surge protection
circuit can improve product stability. The product supports one key CCTV model, with VLAN
function can restrain the network storm, protect the information security, prevent the viral
transmission and cyber attack, fully satisfy the Ethernet video security surveillance system and
Ethernet project needs.
Board Diagram
Front board
VerB 1.2
● Major ports 2pcs*100Mbps uplink Ethernet port(reserve a port to connect
internet pcs*100Mbps downlink PoE Ethernet ports every port supports MDI/MDIX
● Special function downlink ports can only communicate
with uplink ports;
● Power input DC48V 57V
● Transmission Distance Ethernet port
● Standard Meet IEEE802.3 af/at standards PoE use
End-Span the spare cable can be of other use;
● Protection: Excellent anti thunder anti static and anti-interference ability
● Appearance Delicate design and easy installation configure the anti-theft lock
hole, guard against theft
●Operation Plug and Play, No Setting required.
:
);4 , ;
: One key CCTV model; 1～4
: ～ ;
: 0～100m; the furthest transmission distance
could reach 250m in CCTV model; Uplink port can reach 100m;
: IEEE802.3 ,IEEE802.3u, ,
,
- , - ;
: ,
;
:
kensington lock
Back board
Side board
Notice
. The transmission distance is related to the connected cable We suggest standard
Cat5e/6 network cable, so the transmission distance can up tofurthest!
1
level will reduce; please use above No.20 wire to connect the grounding terminal.
2) Turn the dial switch for left, the equipment can enter surveillance module after providing
equipment power.
) Device must be connected with lightning protection grounding; otherwise protection
4 Ports PoE Ethernet Switch
Cat5/5e/6 network cable
PoE PTZ Camera
PoE IP Camera
PoE Dome Camera
PoE IP Camera
power
Notice
Application
CCTV mode
Power
indicated light
PoE downlink
Ethernet port
Ethernet port Ground
Power
input port
LCD
NVR
Router
