UQWIMAX WX03 User manual

●Do not charge the battery when the product gets wet with liquids such as water (drinking
water, sweat, seawater, urine of pet animals, etc.).
Doing so might cause re, burns, injury or electric shock.
●Do not disassemble or modify the product.
Doing so might cause re, burns, injury or electric shock.
●Do not let the product get wet with liquids such as water (drinking water, sweat, seawater,
urine of pet animals, etc.).
Doing so might cause re, burns, injury or electric shock.
●Do not allow liquids such as water (drinking water, sweat, seawater, urine of pet animals,
etc.) to get inside the connection terminal.
Doing so might cause re, burns, injury or electric shock.
●Use only optional accessories specied by the WiMAX operator to whom you are subscribed.
Failure to do so might cause re, burns, injury or electric shock.
WARNING Be sure to read the following warnings before use.
●Do not subject the product to strong force, impacts, or vibration, such as letting it fall,
stepping on it, or throwing it.
Doing so might cause re, burns, injury or electric shock.
●Do not allow conductive materials (such as metal objects and pencil lead) to get into the
connection terminal, or dust to get inside it.
Doing so might cause re, burns, injury or electric shock. If a foreign object gets inside, please
contact the WiMAX operator to whom you are subscribed.
●Do not cover or wrap the product with a cloth or bedding while using or charging it.
Doing so might cause re or burns.
●If charging does not nish after the specied time, stop charging.
Failure to do so might cause re, burns, injury etc. due to overcharging etc.
●Turn o the product before you step into a place where ammable gas can leak, such as gas
stations, or a place where dust is generated. Stop charging if you are charging the battery.
Using the product in a place where ammable gas leaks might cause explosion, re, etc.
●If you notice anything unusual about the product, such as an unusual odor, abnormal noise,
smoke generation, overheating, discoloration or deformation during operation, charging or
storage, perform the following measures.
• Remove the charging equipment's (sold separately) plug from power outlet.
• Turn the product o.
• Remove the battery pack from the product.
Failure to do instructions above might cause re, burns, injury, or electric shock. Please contact the
WiMAX operator to whom you are subscribed.
CAUTION Be sure to read the following cautions before use.
●Do not use the product while it is damaged.
Doing so might cause re, burns or injury.
●Do not place the product on an unstable or inclined platform.
Doing so might cause the product to fall etc. and cause injury.
●Do not use or keep in a place that is very humid, dusty, or subject to high temperature.
Doing so might cause re, burns, or electric shock.
●If children use the product, parents or guardians should give them proper instructions and
do not allow them to use the product in the wrong way.
Failure to do so might result in injury.
●Keep the product out of the reach of babies and infants.
Failure to do so might cause accidental ingestion, injury, electric shock.
●Be careful when using the product continuously for a long time or charging because
temperature of the product might become warm. Also, be careful not to touch it
unintentionally for a long time when you fall asleep etc.
The product, battery pack, or charging equipment (sold separately) might become warm when
using for a long time or while charging. If you are directly in contact with warmed part for a long
time, it might cause a redness of skin, itch, rash, low-temperature burn etc. depending on your
physical condition.
■Main unit
DANGER Be sure to read the following hazards before use.
●Do not heat the product or throw it into a re.
Doing so might cause re, burns, injury, etc. because the battery might ignite, rupture, overheat, or
leak uids.
●Do not put excessive force such as sticking a nail (sharp object) into the product, hitting it
with a hammer (hard object), or stepping on it.
Doing so might cause re, burns, injury, etc. because of ignition, burst, heat or leaking of the battery.
●If the internal substance etc. of the display gets into your eyes or mouth, do not rub them,
rinse them with clean water and then immediately consult a doctor.
Failure to do so might cause blindness, medical problem, etc. due to eects of display substance etc.
WARNING Be sure to read the following warnings before use.
●Do not allow liquids such as water (drinking water, sweat, seawater, urine of pet animals,
etc.), metal pieces, burnable items, and other foreign objects to get inside the Micro IC
Card slot. Also, do not insert au Micro IC Card (LTE) into wrong slot, or insert it in wrong
orientation.
Doing so might cause re, burns, injury or electric shock. If a foreign object gets inside, please
contact the WiMAX operator to whom you are subscribed.
●Turn the product o before boarding an airplane.
Use of mobile devices on board is restricted. Follow the instructions of the airline.
Failure to do so might adversely aect on-board electronic equipment.
Prohibited acts related to mobile device usage on an airplane might be punished by law.
●Follow the instructions of the medical institution for the use of mobile devices on their
premises.
Turn the product o in places where its use is prohibited.
Failure to do so might aect electronic devices or electronic medical equipment.
●If you are wearing any electronic medical equipment, contact the manufacturer or retailer of
the electronic medical equipment for information about the possible aect of radio waves.
The radio waves from the product might aect electronic medical equipment.
●Turn o the power to the product near electronic devices or equipment using high precision
controls or weak signals.
Failure to do so might interfere with the operation of electronic devices or equipment.
* The following are some electronic devices or equipment that you should be careful of:
Hearing aids, implantable cardiac pacemaker, implantable cardioverter debrillator, other
electronic medical equipment, and other automatically controlled devices or equipment. If you
use an implantable cardiac pacemaker, implantable cardioverter debrillator, or other electronic
medical equipment, check with the electronic medical equipment manufacturer or retailer
whether the operation can be aected by radio waves.
■Precautions Common to the Main unit, Battery pack, Charging equipment,
au Micro IC Card (LTE) and Peripheral devices
DANGER Be sure to read the following hazards before use.
●Do not use, store, or leave the product in locations subject to high temperatures or
accumulation of heat (e.g. by the re, near a heater, under a heated kotatsu or bedding, in
direct sunlight, or in a car in the hot sun).
Doing so might cause re, burns, injury or electric shock.
●Do not put the product in or near microwave ovens, cooking appliances, such as IH cooking
heaters, or high pressure containers, such as pressure cookers.
Doing so might cause re, burns, injury or electric shock.
●Do not splash sand, soil or mud, or do not directly place the product on them. Also, do not
touch the product with hands with sand etc. adhered.
Doing so might cause re, burns, injury or electric shock.
●Be careful about broken glasses or exposed internal part of the product if the display is
broken.
Touching damaged or exposed part might cause burns, injury, electric shock.
CAUTION Be sure to read the following cautions before use.
●Do not swing the product around by holding the hand strap, etc.
Doing so might cause an accident or injury if the product hits people or surrounding objects.
●If the display is damaged and when the internal substance runs out, do not get it on your
skin such as face, hands, or cloths etc.
Doing so might cause blindness, injury on your skin.
If the internal substance etc. gets into your eyes or mouth, or contacts skin or clothes, immediately
rinse the contacted area with clean running water.
If the uid gets into the eyes or mouth, immediately consult a doctor after rinsing.
●When removing the rear cover, do not exert more than necessary force.
Doing so might damage the rear cover and cause an injury.
●When attaching the rear cover, do not pinch your ngers.
Doing so might cause an injury.
●Do not use the product with the rear cover removed.
Doing so might cause burns, injury or electric shock. If a foreign object accidentally gets into the
product, please contact the WiMAX operator to whom you are subscribed.
●To use the product in a car, check with automobile manufacturer or dealer to determine how
the car device is aected by radio waves before using.
In rare cases, using the product in some vehicle models can cause the vehicle’s electronic
equipment to malfunction. In that case, stop using the product immediately.
●If skin problems develop from using the product, immediately stop using it and consult
a doctor. The use of the product might cause itching, rashes, eczema, or other symptoms
depending on the user’s physical condition.
<List of materials>
Component Material / Surface treatment
<SpeedWi-Fi NEXTWX03 main unit>
Display (touch panel) part PC resin
Exterior case PC resin / coating
Power button PC resin / printing
Rear cover PC resin / coating
<microUSB cable>
Cable (jacket part) PVC resin
USB connector (shielded part) Iron / nickel plating, PBT resin
USB connector (resin part) PVC resin
microUSB connector (shielded part) Stainless steel / nickel plating, LCP resin
microUSB connector (resin part) PVC resin
<Battery pack>
Exterior (resin part) PC resin
Exterior (label) PET
Connection terminal PCB / gold plating
●Watch the display in an adequately bright place taking a certain distance from it.
Watching it in a dark place or closely might reduce visual acuity etc.
■Battery pack
DANGER Be sure to read the following hazards before use.
●Do not allow metal objects (such as necklaces or hairpins) or conductive foreign objects to
touch the connection terminal. Also, do not store or carry the battery pack with such items.
Fire, burns, or injury might occur if the battery pack ignites, ruptures, overheats, or leaks uid.
●Do not forcefully attach the battery pack if you cannot smoothly attach it.
Fire, burns, or injury might occur if the battery pack ignites, ruptures, overheats, or leaks uid.
●Do not heat the battery pack or throw it into a re.
Fire, burns, or injury might occur if the battery pack ignites, ruptures, overheats, or leaks uid.
●Do not put excessive force such as sticking a nail (sharp object) into the battery pack, hitting
it with a hammer (hard object), or stepping on it.
Fire, burns, or injury might occur if the battery pack ignites, ruptures, overheats, or leaks uid.
●Conrm the orientation of the battery pack when attaching it to the product.
If you attach it in the wrong orientation, re, burns, or injury might occur if the battery pack ignites,
ruptures, overheats, or leaks uid.
●If the internal substance etc. of the battery pack gets into your eyes, do not rub them, rinse
them with clean water and then immediately consult a doctor.
Failure to do so might cause blindness, medical problem, etc. due to eects of battery pack
substance etc.
WARNING Be sure to read the following warnings before use.
●If you notice anything unusual about the battery pack, such as an unusual odor, overheating,
discoloration, deformation or depression, do not use the battery pack.
Fire, burns, or injury might occur if the battery pack ignites, ruptures, overheats, or leaks uid.
●Immediately move the battery pack away from re if you notice leakage of liquid or unusual
odors.
The liquid that leaks out might ignite and cause a re or rupture.
●Be careful not to let the battery pack be bitten by your pet.
Fire, burns, or injury might occur if the battery pack ignites, ruptures, overheats, or leaks uid.
CAUTION Be sure to read the following cautions before use.
●If the internal substance etc. of the battery pack leaks out, do not get it on your skin such as
face, hands, or cloths etc.
Doing so might cause blindness, injury on your skin.
If the internal substance etc. gets into your eyes or mouth, or contacts skin or clothes, immediately
rinse the contacted area with clean running water.
If the uid gets into the eyes or mouth, immediately consult a doctor after rinsing.
●Do not discard the battery pack together with regular trash.
Doing so might cause re, burns, injury, etc. due to ignition. Also, it might cause environmental
destruction. When you no longer need a battery pack, put tape on the terminals to insulate them
and take it to a recycle center, such as an au shop, or recycle it according to the instructions of your
local government.
●Do not use or charge a wet battery pack.
Fire, burns, or injury might occur if the battery pack ignites, ruptures, overheats, or leaks uid.
■Charging equipment
WARNING Be sure to read the following warnings before use.
●Do not use the specied charging equipment (sold separately) or the microUSB cable if their
cables become damaged.
Doing so might cause re, burns, or electric shock.
●Do not use the specied charging equipment (sold separately), cradle (sold separately), or
the microUSB cable in extremely humid places, such as a bathroom.
Doing so might cause re, burns, or electric shock.
●If you hear thunder, do not touch the charging equipment or microUSB cable.
Doing so might cause an electric shock.
●Do not short-circuit the connection terminal while it is connected to a power outlet. Do not
touch the connection terminal with your hands, ngers, or any part of your body.
Doing so might cause re, burns, or electric shock.
●Do not place heavy objects on a cable of the specied charging equipment (sold separately)
or microUSB cable, or do not apply excessive force to the cable such as pulling.
Doing so might cause re, burns, or electric shock.
●When you insert or remove the charging equipment (sold separately) to or from a power
outlet, do not contact metal straps or other metal objects with the charging equipment.
Doing so might cause re, burns, or electric shock.
●Do not use an overseas travel voltage converter (travel converter) with the charging
equipment (sold separately).
Doing so might cause re, overheating, or electric shock.
●Do not put excessive force to the connection part with the specied charging equipment
(sold separately) connected to the product.
Doing so might cause re, burns, injury or electric shock.
●Do not touch the cable of the charging equipment (sold separately) or microUSB cable, the
connection terminal, the power plugs, or the cradle (sold separately) with wet hands.
Doing so might cause re, burns, or electric shock.
●Use the specied power supply and voltage.
Using the wrong power supply or voltage might cause re, burns, or electric shock.
Charging equipment: 100 VAC (connect only to a household AC power outlet)
●Wipe o dust on the power plug.
Using it while it is dusty might cause re, burns, or electric shock.
●When you connect the charging equipment (sold separately) to a power outlet, insert it
rmly.
Insecure inserting might cause re, burns, electric shock.
●When you remove the power plug from the power outlet, do not apply excessive force to
pull on the cable of the charging equipment (sold separately). Hold the charging equipment
(sold separately) to pull it out.
Pulling on the cable of the charging equipment might damage the cable and cause re, burns, or
electric shock.
●When you insert or remove the charging equipment (sold separately) into/from the product,
insert or remove it straightly toward the connection terminal without applying excessive
force when pulling on the cable.
Removing these incorrectly might cause re, burns, injury or electric shock.
●If the connection terminal is deformed such as being bent etc., stop using immediately. Do
not use them with the deformation restored.
Doing so might short-circuit the connection terminal or cause re, burns, injury or electric shock.
●Always remove the power plug of the charging equipment (sold separately) from an outlet
when not using it.
Leaving the power plug connected to the power outlet might cause re, burns, injury, or electric
shock.
●Immediately remove a power plug for the charging equipment (sold separately) from an
outlet if liquids such as water (drinking water, sweat, seawater, urine of pet animals, etc.) get
in.
Failure to do so might cause re, burns or electric shock.
●Remove the power plug from the power outlet when cleaning.
Failure to do so might cause re, burns or electric shock.
CAUTION Be sure to read the following cautions before use.
●Do not touch the charging equipment (sold separately) for a long time while it is connected
to the power outlet.
Doing so might cause burns.
■au Micro IC Card (LTE)
CAUTION Be sure to read the following cautions before use.
●Be careful of the cut surface not to hurt your body parts such as ngers when handling the
au Micro IC Card (LTE).
Failure to do so might cause injury.
■Using near medical equipment or in medical institutions
WARNING Be sure to read the following warnings before use.
●If you have electronic medical equipment such as an implantable cardiac pacemaker or an
implantable cardioverter debrillator, carry or use the product 15 cm or more away from the
implant at all times.
The radio waves from the product might have harmful eects on the operation of electronic
medical equipment.
●If you need to use electronic medical equipment other than implantable cardiac pacemakers
or implantable cardioverter-debrillators outside medical institutions such as treating at
home, consult the relevant electronic medical equipment manufacturer for eects on the
equipment by radio waves.
The radio waves from the product might have harmful eects on the operation of electronic
medical equipment.
●If there is any chance that the distance between the product and a person closest to you may
get shorter than 15 cm such as when you cannot freely move around, set the product not to
emit radio wave in advance (turning o the power, etc.).
A person in close proximity may be equipped with electronic medical equipment such as an
implantable cardiac pacemaker or an implantable cardioverter debrillator. The radio waves from
the product might have harmful eects on the operation of electronic medical equipment.
●Follow the instructions given by the respective medical institution regarding the use of the
product on their premises.
Failure to do so might have eects on the operation of electronic medical equipment.
After reading, keep this manual in a safe place
for quick reference.
Technically Certified
NWA-A02874-001-00
October, 2016
Instruction Manual
Precautions
Do not wrap the microUSB cable or AC adapter (sold separately) around the unit while
they are plugged into the unit.
Excessive force continuously applied to the plug might cause failures.
Refrain from wrapping the cable and remove it instead.
Exemptions
• The Company is not liable for any damages arising from earthquakes, lightning, storms, oods or other natural
disasters, as well as res, actions by third parties, other accidents, intentional or mistaken operation by the customer,
or use under other unusual conditions outside the responsibility of the Company.
• The Company is not liable for any incidental damages (change/disappearance of recorded content, loss of business
income, disruption of business, etc.) arising from the use of or inability to use the product.
• The Company is not liable for any damages arising from failure to observe the recorded content of the "Instruction
Manual".
• The Company is not liable for any damages arising, for example, from malfunction caused by combination with
connected devices or software not related to the Company.
• The settings and other stored data may sometimes be altered or lost due to faults, repair or other handling of the
product.
• The Company is not liable for any damage or lost income resulting from the loss of data. It is recommended you
keep a copy of important data on your PC's hard disk, etc. Whatever the cause of the defect or malfunction may be,
the Company assumes no responsibility for alteration or loss of saved data.
• Contents saved in this product might be altered or lost due to accidents, faults, repair, or mishandling. Be sure to
keep a copy of important contents. Note thatThe Company assumes no responsibility for any damages or lost
prots resulting from altered or lost contents.
* "The Company" as appears in this manual refers to the following companies.
Sold by: KDDI CORPORATION, OKINAWA CELLULAR TELEPHONE COMPANY
Manufactured by: NEC Platforms, Ltd.
Unauthorized reproduction of the“Instruction Manual”in whole or in part is prohibited.
The contents of the“Instruction Manual”are subject to change without notice.
Safety Precautions (Observe Strictly)
■Before using this product, thoroughly read these safety precautions for proper use.
After reading, store the precautions in a safe place.
■The safety precautions shown here contain information to prevent damage to
property and/or injury to the user or other people and must be observed.
■The symbols in the following categories indicate the level of damage or injury that
may occur due to incorrect usage or if the information provided is not observed.
DANGER This symbol indicates the potential and imminent danger of death or
serious injury (*1) to a person from improper use.
WARNING This symbol indicates the possibility of death or serious injury (*1) to a person
from improper use.
CAUTION This symbol indicates the possibility of minor injury (*2) to a person or
physical damage (*3) to a person from improper use.
*1 Serious injury: This refers to loss of sight, injury, burns (high- and low-temperature), electric shock, broken bones,
injuries with residual aftereects from poisoning, etc., and injuries requiring hospital admission for
treatment or long-term hospital attendance as an outpatient.
*2 Minor injury: This refers to injuries, burns (high- and low-temperature), electric shock, etc. that do not require hospital
admission for treatment or long-term hospital attendance as an outpatient.
*3 Physical damage: This refers to extended damage to buildings, furniture, livestock, or pets.
■
Explanation of icons used in this manual that indicate prohibitions and restrictions
Prohibited
Indicates an action that is not
allowed.
Disassembly prohibited
Indicates that disassembly is not
allowed.
Wetting with
water prohibited
Indicates that use in a place
where the product is likely to get
wet or allowing the product to
get wet is not allowed.
Wet hands prohibited
Indicates that handling with wet
hands is not allowed.
Instruction
Indicates restrictions on actions
according to instructions (actions
that must be done).
Remove the power
Indicates that the power plug
must be removed from the
power outlet.

• If you are using this product in the 2.4 GHz band, you are recommended to set the channel setting to either CH1,
CH6, or CH11 to mitigate interference and increase frequency use eciency.
This does not apply when you must use a setting other than the recommended CH1, CH6, or CH11 to avoid system
interference other than wireless LAN (Wi-Fi®).
■5 GHz Frequency Band Precautions
Wireless LAN (Wi-Fi®) function of this product uses 5 GHz band. Using the 5.2 GHz band and 5.3 GHz band outdoors is
prohibited by the Radio Law.
The channels used on the product are as follows.
W52 (5.2GHz band / 36, 40, 44, 48ch)
W53 (5.3GHz band / 52, 56, 60, 64ch)
W56 (5.6GHz band / 100,104,108,112,116,120,124,128,132,136,140ch)
* W53 (5.3 GHz band) and W56 (5.6 GHz band/132, 136, and 140 ch) cannot be used. (As of October, 2016)
About Each Type of Verication Number and PIN Code
Various verication numbers are used when using this product.
The verication numbers used are as follows. Because the various verication numbers that are set are needed for
various operations and contracts, be careful not to forget them.
Also, be sure to change the initial values to your own numbers before use.
Verication number for lock release
Example use: When setting/releasing the screen lock
Initial value: 1234
Also, be sure to change the initial values to your own
numbers before use.
PIN code
Example use: When preventing unauthorized use of the
au Micro IC Card (LTE) by third parties
Initial value: 1234
Also, be sure to change the initial values to your own
numbers before use.
■About the PIN code
■PIN code
●To prevent unauthorized use of the au Micro IC Card (LTE) by a third party, you can set the product to require a PIN code
entry every time the power is turned on. You also need to enter a PIN code when setting whether the PIN code entry is
required.
●If the PIN code is incorrectly entered three times consecutively, the PIN code will be locked.You can unlock the PIN code
using a PUK code.
• The PIN code is "1234" and entry is set to "Disable" at the time of purchase.You can change the PIN code to any four-
to eight-digit number, and set entry to "Enable" as necessary.
If you set the PIN code to "Enable", be sure to change the PIN code to your own number before using the product.
■PUK code
●In case the PIN code is locked, you can unlock it by entering the PUK code.
• The PUK code is an eight-digit number given at the time of purchase, which is printed on the back side of the plastic
card on which your au Micro IC Card (LTE) is attached.
• After entering the PUK code, you need to set a new PIN code.
• If the PUK code is incorrectly entered ten times consecutively, contact theWiMAX operator to whom you are
subscribed.
• The "PIN code" is not reset by initializing the product.
Data Communication Terminal Etiquette
■Use of the product is not allowed in the following place!
• Use of this product on board an airplane is restricted. Follow the instructions of the airline.
■Consideration for the people around you is important!
• While in public, use this product in places where you will not get in the way of trac.
• It is extremely dangerous to walk while looking at the product's screen. Refrain from operating the product while
walking and after suddenly stopping.
• When on the Shinkansen, in a hotel lobby, etc., move to a place where you are not in the way of others.
• When in crowded places, such as a full train, there may be people with pacemakers around you.
Turn o the power of the product in advance.
• Use of this product may or may not be prohibited in medical institutions, such as hospitals. Follow the instructions in
places where bringing this product is prohibited.
After-sales Service
■Performance parts for repair
The Company retains performance parts for repair of the Speed Wi-Fi NEXT WX03 main unit and its peripherals for
4 years after discontinuation of production.
"Performance parts for repair" refers to parts required for maintaining the functions of the product.
■Warranty card
At the store of purchase, thoroughly check and read the name of the store of purchase, date of purchase and other
necessary details lled in on the warranty card, and be sure to keep it in a safe place.
■Troubleshooting
If you experience diculty setting up an internet connection even when the instructions in the "Setup Guide" and the
" (Full Instruction Manual)" (Japanese) are followed, please check the following items.
Unable to connect to the internet
• Make sure that you are located in a service area.
• The incoming signal strength may be low. Retry the connection in a location with a higher incoming signal strength.
• If the icon [WX2+] does not appear in the display, launch the Quick Setup Webpage to check that an internet
connection has been properly set up.
Communication is easily disrupted
• The incoming signal strength may be low. Check the radio reception level and move to a location for a higher
incoming signal strength.
• Check the remaining battery level. If the remaining battery level is low, recharge the battery pack before reconnecting
the product.
• Check to see if the product is properly connected to a PC or the like on a wireless LAN (Wi-Fi®), Bluetooth®, or by a
microUSB cable.
• If the product is connected to a PC or the like on a wireless LAN (Wi-Fi®) or Bluetooth®, reboot the product.
• If there is radio interference from other networks, such as multiple access points having been set up in the vicinity,
radio reception may be improved by changing“Channels”for the product.
Communication seems slow
• The connection point might be congested. Allow for some time before retrying.
au Micro IC Card (LTE)
The au Micro IC Card (LTE) is lent to you by au. In case of loss or damage, the card will be replaced at your expense.
When a malfunction is suspected, or in case of theft or loss, contact the WiMAX operator to whom you are subscribed.
After-sales service
Please contact the WiMAX operator to whom you are subscribed.
Related Accessories
The types of accessories that can be used to charge the product and connect it to a PC or the like are listed in the
following table.
Battery pack NAD33UAA
WX03 cradle (*1) NAD33PUU (sold separately)
AC adapter (*2) NAD11PQA (sold separately)
Common AC adapter 03 0301PQA (sold separately)
Common AC adapter 03 navy 0301PBA (sold separately)
Common AC adapter 03 green 0301PGA (sold separately)
Common AC adapter 03 pink 0301PPA (sold separately)
Common AC adapter 03 blue 0301PLA (sold separately)
Common AC adapter 05(*3) 0501PWA (sold separately)
Common AC adapter 05(*3) 0501PWV (sold separately)
AC adapter JUPITRIS (white) L02P001W (sold separately)
AC adapter JUPITRIS (red) L02P001R (sold separately)
AC adapter JUPITRIS (blue) L02P001L (sold separately)
AC adapter JUPITRIS (pink) L02P001P (sold separately)
AC adapter JUPITRIS (champagne gold) L02P001N (sold separately)
microUSB cable 01 0301HVA (sold separately)
microUSB cable 01 navy 0301HBA (sold separately)
microUSB cable 01 green 0301HGA (sold separately)
microUSB cable 01 pink 0301HPA (sold separately)
microUSB cable 01 blue 0301HLA (sold separately)
Portable charger 02(*4) 0301PFA (sold separately)
(*1) When connecting the product to the WX03 cradle (sold separately), refer to the "WX03 クレードル (NAD33PUU) 取
扱説明書 (Instruction Manual of the cradle)" (Japanese).
(*2) When charging the product, use the AC adapter (NAD11PQA) (sold separately).
(*3) We recommend using a common AC adapter 05 (sold separately) when charging the product while it is set in the
WX03 cradle (sold separately).
(*4) The product may not be able to charge adequately with a portable charger 02 (sold separately).
* For an updated list of supported related accessories, please check with the WiMAX operator to whom you are subscribed.
Software Used in the Product
This product includes software licensed under GNU General Public License (GPL) and/or GNU Lesser General Public
License (LGPL). The user can obtain the source code of such software, and copy, distribute and modify the software
according to the GPL and/or LGPL.
Refer to the WiMAX Support Information website for details.
Specic Absorption Rate (SAR) of Data CommunicationTerminal
This model Speed Wi-Fi NEXT WX03 conforms to a state-formulated technical standard relating to the human body
absorption of radio waves and international guidelines for radiation protection.
This data communication terminal is designed to conform to a state-formulated technical standard (*1) relating to
the human body absorption of radio waves, and tolerable limits for radiation protection that are recommended
by equivalent international guidelines. These international guidelines have been worked out by the International
Commission on Non-Ionizing Radiation Protection (ICNIRP), a partner to the World Health Organization (WHO), and
their tolerable limits allow for an adequate factor of safety, regardless of the user’s age or health conditions.
The state-formulated technical standard and international guidelines establish such tolerable limits for radiation
protection in terms of a Specic Absorption Rate (SAR), which represents the average rate at which energy is
absorbed by the human body. This data communication has a SAR limit setting of 2.0W/kg. If this data communication
terminal is used under the conditions of normal use dened in this "Instruction Manual", the maximum SAR limit is
0.137 W/kg (*2). Individual product models all satisfy their respective SAR limits, which may vary slightly from one
model to another.
Because data communication terminals are designed to ll the minimum transmitting power requirement for
communicating with base stations for cellular phones, etc., their SAR normally gets lower while they carry on
communication actually. Generally, the closer to a base station a data communication terminal is located, the lower its
output becomes.
When you communicate using this product, keep it at least 1.5 cm away from your body, with no intervening metallic
objects. This procedure has been veried to allow this data communication terminal to conform to the specications
of the state-formulated technical standard and the international guidelines for radiation protection.
The World Health Organization states: "A large number of studies have been performed over the last two decades to
assess whether mobile phones pose a potential health risk. To date, no adverse health eects have been established
as being caused by mobile phone use.”
For more details, please visit the World Health Organization website.
http://www.who.int/docstore/peh-emf/publications/facts_press/fact_english.htm
*1 The technical standard is stipulated in ordinance laws related to the Radio Act (Radio Station Regulations Article 14-2).
*2 This value includes wireless functions that can be used at the same time.
To nd out more about SAR, please visit the following websites.
Ministry of Internal Aairs and Communications website: http://www.tele.soumu.go.jp/e/sys/ele/index.htm
Association of Radio Industries and Businesses website:
http://www.arib-emf.org/01denpa/denpa02-02.html (in Japanese only)
NEC Platforms, Ltd. website:
http://www.necat.co.jp/wimax/support/uqc/wx03/index.html (in Japanese only)
UQ Communications website:
http://www.uqwimax.jp/signup/body_s/
About the Voluntary Control for Interference of RadioWaves
This device is a class B information technology device. This device is intended for use in domestic environments, but it
may interfere with reception if it is used near a radio or television receiver.
Read the instruction manual to use the device correctly. VCCI-B
• This device has an electronic mark on the display indicating compliance based on technical regulations for VCCI
voluntary control standards.
Display procedure: On the home screen, tap [Information] - [Device Information], and then slide to display“Telec
Number”.
Export Administration Regulations
The products and accessories may be subject to the application of the Foreign Exchange and Foreign Trade Act and
other related laws and regulations in Japan. In addition, the Export Administration Regulations (EAR) of the United
States may be applicable. In cases of exporting or re-exporting the products and accessories, customers are requested
to follow the necessary procedures at their own responsibility and cost. Please contact the Ministry of Economy, Trade
and Industry of Japan or the Department of Commerce of the United States for details about procedures.
Trademark Notice
Wi-Fi®, Wi-Fi Alliance®, Wi-Fi CERTIFIED®, WPA™, WPA2™, Wi-Fi Protected Setup™ and their logos are trademarks or
registered trademarks of Wi-Fi Alliance.
The Bluetooth word mark and logo are registered trademarks owned by the Bluetooth SIG, INC., and any use of such
trademarks is under license.
All other company names and product names referred to in this manual are trademarks or registered trademarks of
their respective companies.The mark and the TM mark may be omitted in this manual.
Contact
Please contact the WiMAX operator to whom you are subscribed.
To protect the environment and reuse precious resources, mobile
and PHS operators collect and recycle unneeded phones, batteries,
and chargers with the mark that are brought in by customers,
regardless of the brand or manufacturer.
If the product is charged when wet,
unusual overheating or damage
by a re may occur and it is very
dangerous.
Handling Precautions
These precautions are provided to prevent a fault and ensure that performance can be fully
demonstrated.
Thoroughly read these precautions to ensure correct use.
■Precautions Common to the Main unit, Battery pack, Charging equipment, au
Micro IC Card (LTE) and Peripheral devices
●Do not apply excessive force to the product during use. Be sure not to put the product into a tightly packed bag or
place a heavy object on the product in a bag. Sitting on the product in your pocket might damage the display or
internal circuit board resulting in a malfunction.
Keeping an external device connected to the external connection terminal might damage the connector resulting in a
malfunction. Such damage and malfunction are not covered by the warranty, even if there is no external damage.
●Do not use the product in extremely hot, cold or humid places.
(Use within an ambient temperature range of 5°C to 35°C and humidity range of 35% to 85%.)
●Do not use in places subject to lots of dust or vibration. Doing so might cause a malfunction.
●Clean the connection terminal with dry cotton swabs, etc. every now and then. Soiled terminals might cause poor
connection. Do not apply strong force when cleaning the connection terminal to prevent deformation.
●Clean the product with a soft dry cloth (such as the type used for eyeglasses). Forceful rubbing with a dry cloth may
scratch the display. The display may be stained if splashes or smears are left on the surface. Wiping the display with
alcohol, thinner, benzene, detergent, etc., may also erase the printing on the outer casing or cause failures.
●Use as far away as possible from landline phones,TVs and radios. Use nearby might aect them.
●The product may become warm during data transmission or charging etc. depending on the situation, but this is not
abnormal.
●If the product becomes warm when using it, the power might turn o automatically because of a protection feature. In
that case, turn on the power to connect again after a while.
●Turn o the power before removing the battery pack. If you remove the battery pack with the power on, saved data
might be altered or lost.
●Do not place near corrosive chemicals or in places where corrosive gas is generated. Doing so might cause a malfunction.
●Do not use outside when you can hear thunder. Doing so might risk lightning strikes and electric shock.
●Be sure to use only specied peripheral devices. Use of other peripheral devices might cause a malfunction.
●Do not put the product in a cooking apparatus, such as a microwave oven or a pressure vessel. Doing so might cause a
malfunction.
●The customer is not allowed to disassemble, modify or repair the product. Doing so might cause a malfunction.
Modication of the product is in violation of the Radio Law and Telecommunications Business Act.
●Do not allow a part of your body such as ngers or conductive foreign objects (metal fragments, pencil leads, etc.)
to come into contact with or get inside of the connection terminal to avoid short-circuit. Doing so might cause a
malfunction. If a foreign object gets into the product, please contact the WiMAX operator to whom you are subscribed.
●Do not splash liquid such as water on the product. Also, never use in humid places such as bath areas, or use with wet
hands. Doing so might cause a malfunction due to short-circuit or corrosion of electronic circuits.
●In the event that the product gets wet while charging, immediately remove the power plug of the charging equipment
(sold separately).
●Malfunctions caused by wetting with water or humidity are not covered by the warranty and charges will be incurred
for repairs. Please contact the WiMAX operator to whom you are subscribed.
●Do not use the product while driving a car or motorbike, riding a bicycle, or walking. Use of a mobile device while
driving a car or motorbike is prohibited by law. Use of a mobile device while riding a bicycle might be punishable by
some regulations.
●Using or charging the product in a bag or while it is covered with bedding might cause a malfunction.
●When using a charging equipment or external device, insert/remove the connector straight to/from the terminal. Make
sure of the orientation of the connector is correct. Unless it’s correct, it might cause a malfunction.
●Do not store the product in places subject to direct sunlight (e.g. in a car), places that get hot, places that get extremely
cold, and in humid or dusty places. Doing so might cause a malfunction.
●Do not place the product on an unstable or inclined platform. Be especially careful while the product is charging.
Dropping the product might cause a malfunction.
●Do not exceed the rating of a power outlet or wiring device when charging the product, for example, by starburst
connection etc.
■Main unit
●Do not forcefully press, tap or intentionally subject the display to strong impact. Doing so might cause scratching or
damage.
●Do not forcefully press your ngernails, sharp objects or hard objects against the button or display surface. Doing so
might cause scratching or damage.
●Never use this product when it has been modied. Use of a modied device violates the Radio Law and
Telecommunications Business Act.
The product obtains a technical standards conformity certication of specied wireless equipment based on the Radio
Law and a technical standards conformity approval based on theTelecommunications Business Act, and as a proof, you
can check the“Technical Conformity Mark ”with the product.
<<How to conrm>> On the home screen, tap [Information] - [Device Information], and then slide to display“Telec
Number”.
If the screws of the product are removed and modications are made to the internal components, the certication of
conformity with technical regulations will become invalid. Never use the product without the valid certication. Doing
so violates the Radio Law andTelecommunications Business Act.
●Take care not to place magnetized items such as magnetic cards, speakers and TV sets near the product, as it might
cause malfunction.
Putting a strong magnetic eld close to the product might cause false operation.
●Do not place magnetic cards, such as cash cards, credit cards, and prepaid cards near the product. Doing so might erase
the registered information.
●When you put the product in your pocket or bag, take care so that the display does not come in contact with metal
objects or other hard objects. Doing so might cause scratching or damage. Also, be careful not to scratch or damage
the display by using a strap whose metal or other hard part comes in contact with the display.
●When suddenly brought into a warm place from a cold place, or when in a humid location, or when used where
temperature suddenly changes (e.g. near the air discharge port of an air conditioner), water droplets (i.e. condensation)
sometimes are formed inside the product. Note that when used under conditions such as this, the humidity might
cause corrosion or a fault.
●Note that applying excessive force with the microUSB cable connected to the microUSB connector might cause
damage.
●Do not use the product with the rear cover removed. In addition, do not leave or store the product. Doing so might
allow dust or other foreign objects to get inside and cause a fault. If a foreign object accidentally gets into the product,
please contact the WiMAX operator to whom you are subscribed.
●Do not allow liquids, metal objects, or other foreign objects to get inside of the au Micro IC Card (LTE) slot. Doing so
might cause a malfunction. If a foreign object comes into the slot, please contact theWiMAX operator to whom you are
subscribed.
●Do not give strong impact on the product such as dropping, throwing, stomping. Doing so might cause a malfunction.
●Do not place the product directly on a sandy beach, etc. Sand etc. might get inside the product causing a malfunction.
If a foreign object accidentally gets into the product, please contact the WiMAX operator to whom you are subscribed.
■Display (touch panel)
●Do not put stickers or sheets (e.g. commercially available protective lms, peep prevention sheets) on the display.
Doing so might hinder correct operation of the touch panel.
●When carrying the product in your pocket or bag, take care not to put the touch panel close to metals or other
conductive materials, as it might cause false operation of the touch panel.
●The touch panel is designed to be lightly touched by ngers. Do not apply strong pressure with your ngers or sharp-
pointed objects (such as ngernails, ballpoint pens and pins) on the touch panel.
In the following cases, the product may not respond to touching the touch panel. Or, might cause false operation.
• Operation with gloved hands
• Operation with ngernails
• Operation with foreign object placed on the touch panel
• Operation with a protective sheet or sticker on the touch panel
• Operating with drops of water or condensation on the touch panel
• Operation with wet or sweaty ngers
• Operation with two or more ngers
■Battery pack
(The battery pack of this product is a lithium-ion battery.)
The battery pack is not fully charged at the time of purchase. Charge the battery before using the
product. Charge the battery before using the product for the rst time after purchase, or if you have
not used the product for a long time.
●Use in very hot or cold environments, for example, when left in an automobile with the windows closed in summer,
will cause the battery capacity to drop and shorten the available battery usage time. This will also shorten the battery
pack’s service life.Try to use the battery pack as far as possible at room temperature.
●When the battery pack is not to be used for a long time, remove the battery pack from the main unit, and store it away
from hot and humid places.
●The battery pack is a consumable part. If the performance of a battery does not recover (e.g. the usable time after each
charge has become extremely short), the battery pack is at the end of its service life, so stop using it and buy a new one
of the specied type. Note that the length of service life varies depending on the usage conditions, etc.
●Battery packs sometimes swell up as they approach the end of their service life.This is due to the properties of lithium-
ion batteries, and is not a problem in terms of safety.
●Do not use a battery pack that has been damaged or is leaking battery acid. Doing so might cause a fault.
●Do not wet the battery pack with water, etc. If the battery pack gets wet, it might cause failures. If you drop the product
into water by mistake, immediately turn o the power, remove the battery pack, and contact the WiMAX operator to
whom you are subscribed. Never charge a wet battery pack.
■Charging equipment
●Do not wrap the cable of the specied charging equipment (sold separately) around the AC adapter itself. Do not bend
the connection part of the charging equipment and power plug forcibly. Do not place heavy objects on a cable of the
AC adapter or the microUSB cable, or do not apply excessive force to the cable such as pulling. Doing so might cause a
malfunction.
●Hold the power plug of the specied charging equipment (sold separately) when removing from an outlet. If you pull
the cable, the cable might be damaged.
■au Micro IC Card (LTE)
●Do not forcibly remove or insert the au Micro IC Card (LTE). Be careful not to apply excessive force when inserting the
card into this product.
●You are responsible for any damage caused by inserting your au Micro IC Card (LTE) into some other IC card reader/
writer, etc.
●Do not put stickers, etc. on the au Micro IC Card (LTE).
●Do not use an IC card with a card adapter. Doing so might cause a fault.
●Do not damage the card by using the product in a hot place, dropping into re, contacting to the metal parts with
foreign object, giving an impact, bending, applying load, etc. Doing so might cause loss of data or a malfunction.
■Copyrights and rights of portrait
●You are not allowed to copy, distribute, publish, modify or edit the data you download from the internet using this
product without the consent of the copyright holder, except for personal use, under the copyright law. In addition, do
not use or modify portraits or names of other individuals without their consent, as it might infringe on rights of portrait.
■Backup content that is in the product
●Please back up important content recorded or downloaded on the product to an outside source. Content recorded to
memory on the product sometimes disappears or is altered by unexpected factors, such as static electricity or a fault,
repair, mishandling, etc.
Notes on Using Bluetooth®/Wireless LAN (Wi-Fi®) Functions
• Use the Bluetooth® function in Japan. The Bluetooth® function of this product conforms to domestic wireless
standards in Japan, and has been certied. Use overseas may be subject to punishment by law.
• Use the wireless LAN (Wi-Fi®) function in Japan. The wireless LAN (Wi-Fi®) function of this product conforms to
domestic wireless standards in Japan, and has been certied. Use overseas may be subject to punishment by law.
• The 2.4 GHz band used by wireless LAN (Wi-Fi®) and Bluetooth® devices is shared by various other devices. For this
reason, the communication speed and connectable range may be decreased, or disconnection may occur, due to
interference from other devices.
• Do not use this product in places where electromagnetic waves are generated or near electric products, AV and OA
equipment, or other magnetized devices.
• Subjecting this product to magnetic or electrical noise might increase noise and prevent it from performing
communications. (This product is particularly susceptible to noise when it is used near a microwave oven.)
• Using this product near a TV, radio or similar appliance might cause reception interference and disrupt TV images.
• Searching might not be successful if there are multiple wireless LAN (Wi-Fi®) access points near the product or if the
same channel is being used.
• Use of this product on board an airplane is restricted. Follow the instructions of the airline.
• The communication speed and connectable range vary depending on the distance between communication
devices, obstacles and the Bluetooth® devices used.
■2.4 GHz Frequency Band Precautions
The frequencies used by the Bluetooth® and/or wireless LAN (Wi-Fi®) function of this product are in the 2.4 GHz band.
In this frequency band, other similar wireless stations, in-plant wireless stations for mobile unit identication that
require a license to use, such as factory production lines, specic small power wireless stations that do not require
licenses, amateur wireless stations (collectively called "other wireless stations" from here on) are operated in addition
to home electrical appliances such as microwave ovens, devices for industrial, scientic and medical devices.
1. Before using this product, make sure that "other wireless stations" are not in operation nearby.
2. In the event that instances of radio wave interference have occurred between this product and "other wireless
stations", immediately either relocate this product or stop operation of the device (stop the emission of radio
waves).
3. If you are unclear on any points or are troubled by anything, contact the WiMAX operator to whom you are
subscribed.
The connections between this product and all other Bluetooth® and wireless LAN (Wi-Fi®) devices have not been
conrmed.
Therefore, connections with all Bluetooth® and wireless LAN (Wi-Fi®) devices are not guaranteed.
Although the product’s security functions that serve as a measure of security during wireless communicating
conform to the standard specications for Bluetooth® and wireless LAN (Wi-Fi®), they may not oer enough
security, depending on the usage environment and settings. Be careful when doing data transmission using
Bluetooth® or wireless LAN (Wi-Fi®) function.
Wireless LAN (Wi-Fi®) has the advantage that it can be freely connected anywhere within the radio wave range, as
it uses radio waves for exchanging information. At the same time, there is a risk that a malicious third party may
obtain unauthorized access if security settings have not been congured. You are recommended to congure
security settings before using wireless LAN at your discretion and responsibility.
The Company assumes no responsibility for leakage of data or information that may occur during Bluetooth®/
wireless LAN (Wi-Fi®) communication.
Since Bluetooth® and wireless LAN (Wi-Fi®) functions use the same frequency band, using both functions at the
same time may cause radio wave interference resulting in decreased communication speed or disconnection from
the network. If connection fails, stop using either the Bluetooth® or wireless LAN (Wi-Fi®) function.
Bluetooth® and wireless LAN (Wi-Fi®) functions of this product use frequencies in the 2.4 GHz band.
• Bluetooth® function: 2.4FH4/XX8 This product uses the 2.4 GHz band. It uses FH-SS modulation and other
modulation schemes as its modulation schemes with an interference distance of within 40 m and 80 m, respectively.
• Wireless LAN (Wi-Fi®) function: 2.4DS/OF4 This product uses the 2.4 GHz band. DS-SS and OFDM are used as the
modulation schemes. The interference distance is about 40 m or less.
This means that all bandwidths can be used, and that bands of mobile unit identication devices can be avoided.
For use in an airplane, check with the airline company in advance.
XX8
2.4 : Radio equipment that uses the 2.4 GHz band
DS4 : An interference distance of up to 40 m assumed for the DS-SS system
OF4 : An interference distance of up to 40 m assumed for the OFDM system
FH4 : An interference distance of up to 40 m assumed for the FH-SS system
XX8 : Modulation scheme assumes an interference distance of within 80 m for
other systems
: This means that the product uses all frequency bands and is incapable of
avoiding the frequency band for mobile device identification equipment.
■■■
October, 2016, 1st Edition
Sold by: KDDI CORPORATION, OKINAWA CELLULARTELEPHONE COMPANY
Manufactured by: NEC Platforms, Ltd.