Urban Electric Pipe Table User manual

Pipe Table
ASSEMBLY INSTRUCTIONS MA-1912
GENERAL NOTES
•THIS PORTABLE LUMINAIRE IS SUITED FOR DAMP LOCATIONS.
•WHEN INSTALLING LUMINAIRE, CONFORM TO ALL APPLICABLE
LOCAL ELECTRICAL CODES, ORDINANCES, AND THE NATIONAL
ELECTRICAL CODE (NEC).
•FOR YOUR SAFETY AND PROPER OPERATION OF LUMINAIRE, READ
AND UNDERSTAND ALL INSTRUCTIONS COMPLETELY BEFORE
COMMENCING INSTALLATION OF THIS LUMINAIRE.
•CAREFULLY UNPACK THE LUMINAIRE AND INSPECT FOR DAMAGE.
•THIS PRODUCT IS RATED FOR ONE 60W MAX, TYPE A BULB.
•SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
CAUTION
WARNING: RISK OF FIRE/INJURY TO PERSONS. KEEP AWAY FROM
COMBUSTIBLES. UNPLUG TO CHANGE BULB (LAMP). DO NOT TOUCH
BULB (LAMP).
IMPORTANT SAFETY INSTRUCTION
THIS PORTABLE LUMINAIRE HAS A POLARIZED PLUG (ONE BLADE IS
WIDER THAN THE OTHER) AS A FEATURE TO REDUCE THE RISK OF
ELECTRIC SHOCK. DO NOT ALTER PLUG.
COMPONENTS PROVIDED FOR INSTALLATION
FIXTURE BODY
GLASS GLOBE
BULB

Pipe Table
ASSEMBLY INSTRUCTIONS MA-1912
ASSEMBLY INSTRUCTIONS
STEP 1
CONFIRM THAT THE FIXTURE IS UNPLUGGED FROM THE
ELECTRICAL OUTLET BEFORE INSTALLING BULB.
STEP 2
INSTALL BULB IN FIXTURE.
STEP 3
THREAD GLASS GLOBE ONTO FIXTURE UNTIL SNUG.
STEP 4
INSERT THE PLUG INTO THE ELECTRICAL OUTLET. TAP ANY
METAL PORTION OF THE FIXTURE FOUR TIMES TO CONFIRM
PROPER OPERATION OF THE LOW-MED-HI-OFF SETTINGS.
NOTE: FOR INTERNATIONAL USE ONLY.
BEFORE PLUGGING IN THE FIXTURE, USE THE INSTALLATION
INSTRUCTIONS PROVIDED WITH THE SNELLO LED DIMMER TO
PROPERLY INSTALL THE DIMMER SWITCH ON TO THE CORD.
THEN CONFIRM PROPER OPERATION OF THE DIMMER
SWITCH
FOR QUESTIONS, PLEASE CONTACT CLIENT SERVICES AT: 843.723.8140 OR [e-mail]