BLACK BOX
URIVE SINGLE PLUS
Work Condition LED sign Sound
Power on After booting BLUE LED is turned on during the
booting and the RED LED is turned on
after the booting One long beep
Update Update through the micro SD
Card
RED &GREEN LED flickers during the
update and then the device restarts
automatically.
Short tow beeps
during start & end
No power cable or
power switch OFF
The final image saved by
using the backup battery and
then the device is power off. All LEDs are off -
Operation
Button
Button control Condition LED sign Sound
Power
button ON Power ON - -
OFF Power OFF All LED off -
-Power ON After booting RED, BLUE LED flickers every 1sec. Long beep
GPS working GREEN, BLUE LED flicker -
REC
button
Push for 1sec. Manual recording RED, BLUE LED flicker quickly -
Push for 3sec. Voice recording On/Off
(Mute Off/On) LED flickers slowly -
Push the
button for a
long time
(over 10 sec.)
Format the micro SD card GREEN, BLUE LED flicker and then
restart automatically.
Start a format : one
long beep
End a format: one
short beep
-Update Update through the micro SD
Card
RED and GREEN LED are turned on
in them order. After the update, the
device restart automatically.
When its beginning &
end, there are shot two
beeps
-GPS installed GPS working GREEN, BLUE LED flicker -
-Remove the
power cable
The final image saved by
using the backup battery and
then the device is power off. All LEDs are off -
※Reference
-No SD card :five beeps (Repetition)
-Recording failure :five beeps(Repetition)
-When the Voice recording On/Off is set by REC button, the device is restarted automatically
to apply the set functions.(it needs 5second to restart.)
7. Product operation &button
