UROCOMM UROZETTA UZ-100 Specification sheet

Get To Know Your Mobile WiFi
AboutMobile WiFi
1. Power Button
2. Forced Reset Button
3. Type-C USB interface
4. Power Indicator Light
5. Signal Indicator Light
6. WiFi Indicator Light
8. WPS Button
9. SIM Card Slot
10. Device Label
1. Buttons

1) Power Button: Long press the Power Button for more than 3 seconds to
power on/off the device;
2) WPS Button：For devices with WPS capability, turn on the WPS
connection function then long press the Mobile WiFi WPS Button for over
3 seconds. After the devices pair, complete the encryption authentication
and connection between the Mobile WiFi and the wireless device.
3) Forced Reset Button：Short press to force restart and restore factory settings.
Long press for more than 8 seconds to force power off. (Please do not
press the Forced Reset Button by yourself without customer service
support.)
2. Indicator Light Description
Power On Status
Power Indicator
Light
Continuous Red Light
Low Battery
Continuous Yellow Light
Medium Battery
Continuous Green Light
High Battery
Flashing by different
Battery Level
Charging
Signal Indicator
Light
Continuous or Slowly
Flashing Red Light
SIM card or network abnormal
Quickly Flashing Blue
Light
Wait to connect with Network
Continuous Blue Light
Network connected
WiFi Indicator
Light
Slowly Flashing Blue Light
WIFI open to wait Client device connection
Continuous Blue Light
Client device connected with WiFi
Quickly Flashing Blue
Light
WPS Starts，automatically stops after 2
minutes,or stops after connection
finish
Lights out Blue Light
WiFi abnormal
Power Off Status

Power
Indicator Light
Flashing Red Light
Charging and Low Battery
Flashing Yellow
Light
Charging and Medium Battery
Flashing Green
Light
Charging and High Battery
Continuous Green
Light
Charging is completed
Signal
Indicator Light
Lights out
Power off Status
WiFi Indicator
Light
Lights out
Power off Status
System Status：
Power
Indicator Light
Continuous Green
Light
System Starts up
Flashing Yellow
Light
FOTA upgrade When
System Starts up
Flashing Red Ligh
System Shutdown
3. How to connect a device to your Mobile Wifi Network
1）WiFi Network Manual Connection
a) Find the SSID and KEY displayed on the bottom label of the Mobile WiFi device
b) Enter the SSID and KEY found on the network connection of your phone or
other device you want to connect to successfully connect to the network.
2）Scan WeChat QR Code Connection
a) Find the Ucode QR code at the bottom of theMobileWiFidevice
b) Open WeChat on your phone or other device and scan the QR code
c)After the scan is completed, yourphone or other device will automatically connect
to the network.
3) WPS One-click Connection
a) Turn on the "WPS" function in the settings of your phone or other device
you want to connect.
b) Press the "WPS" button on the right side of the Mobile WiFi device to
activate the WPS networking function.
c) Yourphone or other device should automaticallyfind the network. After

the confirmation prompt pops up on your phone or other device, click
"OK" to connect to the network.
Note: This feature is only available on Android devices.
4. Use of SIM card slot
1) Mobile WiFi only supports" Physical SIM ” mode.
2) In the" Physical SIM ” mode, a SIM card must be inserted to use the Mobile WiFi
device. Some SIM cards also need an APN to be setup, which should be setup on the
WebUI or App. The external card slot does not support switching SIM cards when the
Mobile WiFi device is on. If you need to use a SIM card, restart the Mobile WiFi device
after inserting or extracting an external SIM card.
5. Device Management
1）Scan the QR code below to download the app. Change password, Remote
location, set APN, restart the device, etc. You can also find additional functions in
the APP.
6. About the WebUI–Change your settings though your web browser
1) Connect your mobile phone or PC to theMobile WiFiWLAN network.
2) In your phone or PC's internet browser address bar, enter the address
"urocomm.info" or “192.168.225.1” in the browser, the default password
is: 12345678
3) After logging in, you can use the Web Page to change your password and
set an APN, etc.

Mobile WiFi Specifications
Product
Name
Mobile WiFi
Model No.
UZ-100
Size
86mm*86mm*26mm
Weight
163g
Bands
LTE-TDD: B38/B40/B41
LTE-FDD:
B2/B4/B5/B7/B12/B17/B18
WCDMA:B2
GSM: B2/B5
WLAN
Support 2.4G & 5G
IEEE 802.11a/b/g/n
LCD Screen
Not support
LCD Pixels
-
Touch
Screen
Not support
Battery
Type
Lithium-ion 21700 battery
Cell
Norminal
Capacity
5000mAh
Cell Rated
Capacity
4850mAh
USB Port
Input：Type-C 5V2A
Output：Type-C 5V1A
Bluetooth
Support
（This feature is coming
soon）
AI
Not support
Cloud MiFi
Not support
Other
functions
GPS，Power bank，WPS
Working
temperature
-10℃-35℃

FAQ
1. How to change the Wi-Fi name and password?
First connect your mobile phone or PC device to your Mobile WiFi WLAN
network , and enter“urocomm.info”or 192.168.225.1，and enter the password
12345678 in your browser to open the administration interface. Here you can
change your Wi-Fi name and password. After it has been changed, remember to
save it.
Alternatively, you can change the Wi-Fi name and password in the UrocommAPP.
2. What should I do when my Phone/Tablet cannot connect with the device?
(1) Make sure the Phone/Tablet's WLAN Wifi is turned on.
(2) Refresh your device's network connection list, and search for the SSID of the
device.
(3) Make sure to input the correct password.
(4) Disconnect your device from your current network and then reconnect.
3. What should I do when the device has no internet connection?
(1) Make sure the devicestatus is normal. The signal may be weaker when in
airports, mountain areas, high ways, harbors, basements, rural areas and islands.
Please restart and try again after moving to a different location.
(2) If you still can not get an internet connection,please contact us by email :
[e-mail]
4. What should I do if my device is lost？

If your device is lost accidentally, please contact customer service to freeze your
account in time to avoid additional fees.
5. Why can I not use my device after a SIM card is inserted？
In some countries when you insert a SIM card, you need to manually set an APN.
If this is the case, please go to the website: urocomm.info or 192.168.225.1 , and
enter the password 12345678; After entering the Web UI, go to Settings”-
“Mobile network settings”-“APN”, manually add a network operator APN,
and then save the settings.
Warning
· Please only use original accessories provided with purchase. Use of unauthorized
chargers or other accessories may cause damage to the device and can result in
fire, explosions, or other hazards.
If users of the Mobile WiFi device use a power adapter to charge the Mobile WiFi device,
they should purchase a power adapter that meets the requirements of the corresponding safety
standards or a power adapter that has obtained the quality and safety certification of the
country in which it is used.
· Please keep the device in a dry and cool environment and do not let the device
come into contact with water. Extreme high or low-temperatures may cause
damage to the device.
· Please do not expose the device to high temperature environments or heating ,
such as strong sunlight, heaters, microwaves, ovens, or water-heaters etc.
An overheated battery might cause explosion.

· When charging is complete or the device is fully charged, please disconnect the
charger from the device and unplug the charger from the power outlet.
· The built-in battery is non-removable. Please do not attempt to change or
disassemble the battery by yourself. This may result in damage to the battery or
the device. The battery can only be replaced by an official authorized service
provider.
Notice: Using the wrong model of battery may result in an explosion. Please
make sure to dispose of used batteries as instructed.
Device Working Temperature: The device should be kept at a working
temperature of -10℃ to 35℃. For the user's safety, please avoid using the
device in a high-temperature environment for long periods of time, as this
leads a shorter device lifetime. The device will stop charging automatically
when the battery temperature reaches 45℃, and shut down automatically
when battery temperature is more than 55℃.
When using an external SIM card, self-cutting SIM cards and non-standard
SIM cards can not be used.
We are only responsible for the function of the device’s official operating
system and update system. The use of any other systems or software from

unofficial third parties might cause security risks.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
SAR tests are conducted using standard operating positions accepted by the FCC
with the device transmitting at its highest certified power level in all tested
frequency bands, although the SAR is determined at the highest certified power
level, the actual SAR level of the device while operating can be well below the
maximum value. Before a new device is a available for sale to the public, it must
be tested and certified to the FCC that it does not exceed the exposure limit
established by the FCC, Tests for each device are performed in positions and
locations as required by the FCC.
For body worn operation, this device has been tested and meets the FCC RF
exposure guidelines when used with an accessory designated for this product or
when used with an accessory that contains no metal and that positions the
handset a minimum of 10 mm from the body.Non-compliance with the above
restrictions may result in violation of RF exposure guidelines.

Caution!
Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
This device is restricted to indoor use when operating in the 5150-5250MHzfrequency range
in all EU/EFTA member states and Turkey.
Countries:
(BE/BG/CZ/DK/DE/EE/IE/EL/ES/FR/HR/IT/CY/LV/LT/LU/HU/MT/NL/AT/PL/PT/RO/SI/SK/FI/SE/UK
/TR/NO/CH/IS/LI)
EU Regulatory Conformance
Hereby, Beijing ULINK Technology Co., Ltd. declares that this radio equipment type is
in compliance with the Directive 2014/53/EU. For the full text of the EU declaration
of conformity, visit this website: www.urocomm.com
Notice: The operating temperature of the device between -10℃to 35℃.
This product can be used across EU member states.
RF EXPOSURE INFORMATION (SAR)
This device meets the government’s requirements for exposure to radio
waves.
The SAR limit set by the CE is 2.0W/kg
The highest reported SAR values under the CE regulatory for your device are
listed below:
Body SAR: 1.051W/kg
Contact
Service Email: [e-mail]
Copyright Notice

Beijing Ulink Technology Co., Ltd. reserve the final interpretation of the UROZETTA
trademarks for this product.
For More Surprises:
Please visit www.urocomm.com