UROVO i3000 User manual

1
User Manual for UROVO i3000

2
Copyright Statement
Information contained in this document provides solely the description of
the current status of the product but not an intended guarantee, including
but not limited to any implied warranties of merchantability and fitness for
a particular purpose. Urovo Technology Co., Ltd. (hereinafter referred to
as the Company) reserves the right to change the features, specifications,
warranty information and document contents of related products at any
time without prior notice.
This document contains exclusive information protected by the Copyright
Law of the People’s Republic of China, with all rights reserved. Except the
part permitted by the Copyright Law of the People’s Republic of China, no
contents shall be duplicated, reproduced, modified or translated in whole
or in part without written consent of the Company.
Control programs of this product are also protected by the Copyright Law
of the People’s Republic of China, with all rights reserved.
Microsoft, Windows, Windows 2000, Windows XP, Windows 2003,
Windows Vista, Windows 2008, Windows 7, ActiveSync, Windows
Mobile Device Center, and Internet Explorer are registered trademarks of
Microsoft Corporation in the United States or other countries.
All the other brand names and product names mentioned in this document
are legal trademark names, service marks or registered trademarks of the
corresponding companies.
Before using this product, read this manual carefully.

3
Insta lingtheSIMCard,MemoryCardandBattery
.18
PoweringOn/OfftheDevice
.18
ChangingDateandTime
.19
UsingtheStylus
.22
EnteringText
.22
ManagingDeviceFunctions
.25
ScanningBarcodes
.26
ConnectingtoaPC
.27
RestartingtheDevice
.28
RestoringDefaultSettings
.28
CalibratingtheScreen
.29
CheckingtheRemainingElectricity
.30
PrecautionsforUsingtheBattery
.31
Content
CONTENT ......................................................................................... 3
CHAPTER 1 PACKING CONFIRMATION ............................................ 5
CheckingArticlesContainedinthePackage .5
CHAPTER 2 INTRODUCTION ............................................................ 6
ProductIntroduction
.6
MainFunctionsandFeatures
.7
DetailedParameters
.9
FunctionIntroduction:FrontViewandSideView
.12
MasterKeyboardIntroduction
.14
FunctionIntroduction:BackView
.16
CHAPTER 3 USING THE DEVICE......................................................18

4
SupportandService
.48
WarrantyPeriod
.49
WarrantyScope
.50
WarrantyDeclaration
.50
Contact
.50
CHAPTER 4 ADVANCED SETTINGS ................................................. 32
SettingthePowerButtonFunction
.32
SettingtheGPRSNetwork
.32
SettingtheWi-FiNetwork
.40
SettingtheOptionsforBarcodeScanning
.45
CHAPTER 5 AFTER-SALES SERVICE.................................................48

5
Chapter
1
Packing
Confirmation
Checking Articles Contained in the Package
Before using the product, please check whether the package contains the
following articles:
Power adapter
Battery
Connector adapter
Data line

6
Chapter 2 I ntroduct i on
Product Introduction
The i3000 product is an industry-level handheld terminal developed,
designed, and produced based on features of different industries by Urovo
Technology Co., Ltd. (hereinafter referred to as the Company). The i3000
adopt ergonomic design and is compact and flexible, shock-proof, and
drop-proof. The i3000 can work in the standby mode for a long time. In
addition, the i3000 adopt the dual power supply mode and support the
conversation function.
1 Integrated and Portable Design
With the waterproof, dustproof, drop-proof, high-/low-temperature
resistant and electrostatic discharge (ESD) design in compliant with the
IP54 industrial standard, the i3000 can endure multiple drops to a smooth
concrete floor from a height of 1.2 m, and resist splashes and dusts in any
direction. The high capacity and long service life of the battery can fully
meet the requirements for daylong mobile operations. The dual
power supply mode can avoid any data loss. The ergonomic design
complies with the operational habits of you and can mitigate operation
fatigue. Among all handheld terminals in the market, the i3000product
has the lightest weight, because it weighs only 280g (including the
battery). With the dimensions of 189mm (length) x 68 mm (width)
x 38 mm (thickness), the product is compact, portable, and easy to carry.
2 High-Speed and High-Capacity Data Processing
The i3000 provide a 533 MHz CPU processing speed, 512/256/128
MB built-in storage, and 128 MB memory, which ensures the high-speed
running of programs with complex service logic and efficient data

7
processing. The i3000 support the Micro SD/TF card with a maximum
capacity of 32GB and can store a large amount of service data.
3 Powerful and Flexible Data Communication
The i3000 provide various functions, including voice and short
messaging on the GSM network, GPRS data communication,
communication on the 802.11b/g/n Wi-Fi WLAN, communication by
using the RS232 serial port, and Bluetooth communication. The i3000
comply with the CISCO CCX2, 3 security standards and support the
CISCO AP and security regulations. The i3000 can be used to update data
remotely.
4 Windows CE Operating System
The Windows CE operating system (OS) provides a complete feature set
and development environment, and obtains features of every customized
device such as real-time, small memory usage, multimedia, and network
connecting capability. The OS supports multiple languages, including
English, Simplified Chinese, and Traditional Chinese. The OS can be used
to develop terminal software by using Java, C++, and C# and provides a
comprehensive software development kit (SDK) free of charge. The OS
supports remote connection by using Telnet and Microsoft Internet
Explorer 6 for browsing HTML/XML files.
Main Functions and Features
1. Compact, portable, and durable.
2. Long working time: The product can work for more than eight hours
consecutively.
3. Easy charging: The product uses a USB interface for charging
without a specialized data line. You can charge the device anytime
anywhere as long as there is a USB interface.

8
4. Dual power supply mode: When the master battery is used up and
the slave battery is fully charged, the product can work in the
standby mode for six hours to prevent data loss caused by
unexpected power failure.
5. Extensible hardware module
a A camera with 5 million pixels
b GPS positioning
c High frequency/ultrahigh frequency RFID read/write
6. Built-in one-dimension scanning module
7. Communication mode: The product supports Wi-Fi communication,
GPRS/GSM communication, and Bluetooth communication.
8. Open design: The product provides a software interface that can be
used to develop application functions.
9. The product is an industry-level device that is drop-proof, dustproof
and high-/low-temperature resistant.
10. High-speed and high-capacity data processing: The product provides
a 533 MHz CPU processing speed, 512/256/128 MB built-in storage,
and 128 MB memory and supports the Micro SD/TF card with a
maximum capacity of 32GB.
11. The product provides a 3.2 in. color touch screen.
12. The product supports Chinese handwriting input.
Applicable Industries
� Apparel industry
� Fast moving consumer goods (FMCG), retail, and supply chain
industries
� Logistics industry (including warehousing, express delivery, and
LTL material transport)
� Hospital, government, mobile office, and asset inventory.

9
Detailed Parameters
Model
I3000
CPU
SAMSUNG S3C2451 (533 MHz)
Operating
System
Microsoft Windows CE 5.0 OS
(Multi-lingual)
Memory
RAM
128 MB
Flash-ROM
128/256/512 MB (standard
configuration: 128 MB)
Extension
Micro SD/TF slot (a maximum of
32 GB)
Scanning
Parameters
Scanning engine
type
One-dimension laser scanner
Scanning speed
200 per second (bidirectional)
Scanning
distance
60–650 mm
Scanning angle
54±5 degree
Resolution
0.127–1.00 mm
Readable
barcodes
UPC-A, UPC-E, UPC-E1,
EAN-8, EAN-13, Bookland EAN,
Code 128, UCC/EAN-128, Code
39, Trioptic Code 39, Code 39
Full ASCII, Code 93, Code 11,
Interleaved 2 of 5, Discrete 2 of 5,
Codabar, MSI, GS1 DataBar 14,
GS1 DataBar Limited, GS1
DataBar Expanded
Screen
3.2 in. TFT-LCD QVGA
(240 x 320) color touch screen

10
Input
Soft keyboard
English, Pinyin, and Chinese
handwriting
Hard keyboard
28-key alphanumeric keyboard
Scanning start
key
the central key
Communication
Wi-Fi WLAN
(standard
configuration)
The i3000 product supports
communication on the
802.11b/g/n Wi-Fi WLAN with a
rate of
65 Mbit/s, which meets the
requirements of the CISCO
CCX2, 3 security standards and
supports CISCO AP and security
regulations.
Bluetooth
(standard
configuration)
Bluetooth V2.1+EDR
Wide-area
wireless network
(extension)
The i3000 product provides a
GSM/GPRS wireless
communication module and
supports GSM/GPRS Class10 and
GSM0710 multiplexing.
Camera
(extension)
Camera with 3/5 million pixels and
fill light
GPS (extension)
48 channels; positioning
accuracy: less than 2.5 m; speed
accuracy: less than 0.01 m/s
RFID
(extension)
High frequency/ultrahigh
frequency RFID read/write

11
Power
(Dual-Power
Mode)
Master battery
3.8V 3000 mAh rechargeable
lithium battery
Working hours
10 or above (depending on the
actual environment)
Charging time.
3.5hours
Slave battery
210 mAh, providing power for
six hours
Ingress
protection
IP54
Dimensions
Ergonomic
design
189mm (length) x 68 mm (width)
x 38 mm (thickness)
Weight
280 g (with batteries)
Working
Environment
Operating
temperature
–15 to +50°C
Storage
temperature
–20 to +60°C
Operating
humidity
Relative humidity: 5–95%
(no condensation)
Storage humidity
Relative humidity: 5–95%
(no condensation)
Endurable height
for dropping
The i3000 product can endure
multiple drops to a smooth
concrete floor from a height of
4 inches (1.2 m).

12
Certification
CCC and CE
The i3000 have successfully
passed the CCC compulsory
product certification, CE
certification, and obtained the
type approval certificate for radio
transmission equipment issued by
the Ministry of Industry and
Information Technology.
*The preceding parameters are for reference only. Parameters of a specific
model are subject to specific configurations.
Function Introduction: Front View and Side View
2.Touch
screen
1. Scanning&
Charging&
system
indicator
3. Master
Keyboard
4. Power
Button

13
5. Charging
Dock Interface
6. Widow for
scanning barcodes
7. Camera
8. Loudspeaker

14
1. Charging and system indicator
The indicator is displayed in red during charging and green when the
charging is complete and the system runs properly. The indicator blinks in
green when the power is insufficient.
2. Scanning indicator
The indicator is displayed in red when a barcode is scanned successfully.
3. Power button
The power button can be used to power on/off the device or switch the
device into sleep or wake-up mode.
4. Headphone jack
The headphone jack can be inserted with a 3.5 mm headphone.
5. Touch screen
The touch screen enables you to perform operations by using a stylus.
6. USB and charging interface
The USB and charging interface can connect to a USB data line to
transmit and receive data or a power adapter to charge the device.
7. Reset hole
You can use a stylus to click the reset hole to reset the device.
8. Master keyboard
For details about the master keyboard, see “Master Keyboard
Introduction”.

15
Master Keyboard Introduction
1. S1 key: It represents the left softkey and is equivalent to the F11 key
on a computer keyboard.
2. ESC key: You can press the ESC key to perform operations such as
cancel and exit.
3. Alphanumeric keys: You can input numbers or letters based on the
current input mode.
4. Function key: You can use a key combination by pressing ,
releasing it, and then pressing another key.
5. Keyboard backlight key: You can press to turn on/off the
keyboard backlight.
7. Bar code scanning key
8. S1 key
7. Esc key
12. Power Button
4. Function key
6.
1. Arrow Keys
2.
9. Enter Key
3.
4. Alphanumeric
5.
10. Backspace
11. Alphanumeric switching key
8. S2 key
5.Keyboard backlight key

16
6. Arrow keys: The four arrow keys represent four directions
(left/up/right/down).
7. Barcode scanning key: You can scan barcodes by pressing this key.
8. S2 key: It represents the right softkey and is equivalent to the F12
key on a computer keyboard.
9. Enter key: You can press the Enter key for confirmation or to
switch to next line.
10. Backspace key: You can press to delete the previous
character.
11. Alphanumeric switching key: You can press to switch to
another input mode.
12. Power Button: You can press it to turn on or turn off the equipment.
The key combinations are as follows: =
Fn + 0
F10
Fn + 1
F1
Fn + 2
F2
Fn + 3
F3
Fn + 4
F4
Fn + 5
F5
Fn + 6
F6
Fn + 7
F7
Fn + 8
F8
Fn + 9
F9
Fn + Tab
Reset scanner

17
Function Introduction: Back View
1. Widow for scanning barcodes
Laser comes out from this window. Do not look into the window with
naked eyes.
2. Loudspeaker
3. Master battery cover buckles
The master battery cover buckles are used to fix the battery cover.
4. TF card slot
A Micro SD/TF memory card can be inserted in the TF card slot.
5. SIM card slot
An SIM card provided by carriers can be inserted in the SIM card slot.
6. Camera
A camera and fill light are installed here.
1. Widow for scanning barcodes
6. Camera
2. Loudspeaker
5. SIM Card Slot
4. TF Card Slot
3. Master battery cover buckles

18
Chapter
3
Using
the Device
Installing the SIM Card, Memory Card and Battery
1. Rotate the master battery cover buckles by 90 degree to remove the
battery cover.
2. Insert the SIM card or Micro SD/TF card into the combo deck in the
battery compartment and fasten the buckle.
3. Install the battery properly, close the battery cover, and fasten the
buckles.
Note: Only 50% electricity remains in the battery when you use the
battery for the first time. You can charge the battery by using the power
adapter or a seat charger (purchased separately). The first charging must
be more than 12 hours.
Powering On/Off the Device
The i3000 product is powered off when you obtain it for the first time.
After you press and hold down the power button, the indicator is turned on
and the Windows CE screen is displayed. Then you can release the button
to power on the device.
When the device is not used, you can switch the device into sleep mode or
power off the device to save electricity.
1. If you shortly press the power button when the device is in
powered-on mode, the device is switched to sleep mode.
When the device works in sleep mode, power is provided to certain
components and data in the memory is retained. You can press the power
button again to switch back to wake-up mode.

19
2. If you press and hold down the power button for more than three
seconds when the device is powered-on, the following dialog box is
displayed:
Select
Yes to power off the device.
During power-off, the power supply is cut off and data in the memory is
lost. You can press and hold down the power button again to power on the
device.
Changing Date and Time
Click Date/Time on the control panel or double-click the time zone on the
taskbar to display the Date/Time Properties dialog box.

20
Click the Time Zone
drop-down list to choose the
required time zone.
Click Apply on the lower
right corner of the dialog box
to save the configuration.
Click the number
indicating the year to
enter a year directly or
change the year by
clicking the up and
down arrows.