V-GREAT VB-6611S User manual

VSL3.928.010ASY 1 V1.00
zFeature
Used as an warning device to generate fire
alarm;
Installation and wiring same as detector
base;
Driven by detection circuit, no need for extra
power line.
zDescription
VB-6611S Conventional Alert Base is designed for the application inside a closed room. As an
warning device, the base will generate alarm sound when the detector detects a fire occurred.
Installed as a base, it is compatible with the range of VSAIL conventional detectors. It is usually
installed in hotel room, residential bedroom or other locations that are far away from the audible
and visual alarm.
zTechnical Data
Operating voltage: 15VDC～28VDC
Operating current: Standby current: 0mA Action current: ≤4mA (12V)
Sound level >75dB at 1 meter
Tonal modification cycle 0.6~1.5S
Environment Temperature:-10℃~+55℃Relative humidity≤95%，non-condensing
Weight 67g
Dimension diameter of 102mm, height of 25.5mm
Installation hole distance 73mm
zOutline and Installation Dimension
zInstallation and Wiring
1) The flame resistant twisted-pair ZR-RVS-2×1.0~1.5mm2is recommended to be used for the
wiring.
2) Before the installation, please check whether the shell is intact without any damage, and
whether the label is complete.
3) The terminals of the alert base shall be connected as the following diagram:
Control panel terminal Zone Input+: connected with the alert base’s position “1” or “2”;
VB-6611S ConventionalAlert Base
Beijing VSAIL Fire Protection Equipment Co. Ltd.
Building 32, Huilongsen Technology Park,
No.99 14th Kechuang Street, BDA, Beijing, PRC
I
nstallation and O
p
eration Manua
l
V1.00

VSL3.928.010ASY 2 V1.00
Control panel terminal Zone Input-: connected with alert base’s position “4”;
4) The alert base and detector shall be installed as the following diagram:
Warning:
Before installing the device, please turn off the
power of the control panel.
The installation location shall be free from rain or
moisture, and direct sunlight shall be avoided.
During the installation, the sound hole shall aim at an open space without any obstacle or foreign
matter blocking it.
zUsage and Operation
Silence: Resetting the control panel can silence the alarm of the alert base.
Loop capacity: Maximum 32 pieces of VB-6611S can be connected in one conventional
detection zone.
zAttentions
1) If the alert base alarm cannot be started, inspect whether the alert base is damaged.
2) The staff on duty shall be familiar with the operation procedure of the device, and shall
avoid incorrect operations.
3) This alert base is a kind of fire warning product. During the usage, the duty system, the shift
handover and takeover system shall be implemented strictly. And the running record shall be
well done.
4) After the alert base is put into service, it shall be inspected regularly. And the function test is
suggested to be performed at least once half a year.
Conventional
Control Pane
Step 1: Align Sign A of the detector
body with Sign B of the base.
Step 2: Rotate the detector clockwise until
Sign A is aligned with Sign C, then the
installation is finished.
Sound
Hole