V-TAC VT-713S User manual

In case of any query/issue with the product, please reach out to us at: [e-mail]
For More products range, inquiry please contact our distributor or nearest dealers.
V-TAC EUROPE LTD. Bulgaria, Plovdiv 4000, bul.L.Karavelow 9B
MULTI-LANGUAGE MANUAL QR CODE
Please scan the QR code to
access the manual in multiple languages.
INSTRUCTION MANUAL
LED STRING LIGHT
INTRODUCTION & WARRANTY
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions
carefully before starting the installation and keep this manual handy for future reference. If you have any another
query, please contact our dealer or local vendor from whom you have purchased the product. They are trained
and ready to serve you at the best. The warranty is valid for 2 years from the date of purchase. The warranty
does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no
warranty against damage to any surface due to incorrect removal and installation of the product. The products
are suitable for 10-12 Hours Daily operation. Usage of product for 24 Hours a day would void the warranty. This
product is warranted for manufacturing defects only.
TECHNICAL DATA
MODEL VT-713S
SKU 23159
LUMENS 15x2 Lm
WATTS 15x0.5W
LENGTH 13 M
BULB TYPE G50 RGB
NO. OF BULBS 15 pcs
BEAM ANGLE 270°
MATERIAL PVC Wire, Plastic
Bulb
PLUG TYPE EU Plug
INPUT VOLTAGE AC: 220-240V,
50/60Hz

This marking indicates that this
product should not be disposed of
with other household wastes.
WARNING
REMOTE CONTROLLER INSTRUCTIONS
1. Please make sure to turn o the power before starting the installation.
2. Installation must be performed by a qualified electrician.
3. The light source of this luminaire is not replaceable; when the light source reaches its
end of life the whole luminaire shall be replaced.
4. If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively
replaced by the manufacturer or his service agent or a similar qualified person in order
to avoid a hazard.
Caution, risk of electric shock.
ON: Turn on the lights (start with the last setting before OFF)
OFF: Turn o the lights and also the timer
AUTO: Run automatically from JUMP, FADE, IN WAVES,
STROBE, TWINKLE, ASYN JUMP to ASYN FADE
SPEED: Four adjustable speeds for dynamic mode “AUTO, FADE,
JUMP, ASYN FADE, or ASYN JUMP, IN WAVES, per click circular-
ly (1-2-3-4-1). The default speed is the third speed STROBE, and
TWINKLE”, from slow to faster once turn on the lights. There are 16
single colors,1 multi-color and 1 triple-color to select, by pressing
color representing keys.
FADE: Lights fade in synchronous mode
JUMP: Lights jump in synchronous mode. mode
ASYN FADE: Lights fade in asynchronous modemode
ASYN JUMP: Lights jump in asynchronous mode.
IN WAVES: Lights change from dim to bright, then from bright to
dim.
STROBE: Strobe light flash on one or two background colors,
press key to change.
TEINKLE: Two or three colors flash, press key to change.
4H: Lights work in 4 hours, then rest for remain 20 hours.
6H: Lights work in 6 hours, then rest for remain 18 hours.
8H: Lights work in 8 hours, then rest for remain 16 hours.
24H: Lights work for all day long.
e light will ash white once when timer key is pressed.

INSTALLATION DIAGRAM
PACKAGE CONTENT
AC: 220-240V, 50/60Hz
Adapter Remote ControllerLED String Light